[GIT PULL v2 3/4] ARM: imx: soc changes for 3.10
Shawn Guo
shawn.guo at linaro.org
Fri Apr 12 08:32:22 EDT 2013
Hi Arnd, Olof,
It merges imx-fixes-3.9-5, imx-cleanup-3.10 and "[GIT PULL v3] Reset
controller API" as the base to resolve dependency and conflicts.
Changes since v1:
* Rebase to Philipp Zabel's new pull request.
* Merge imx-fixes-3.9-5 into the base to resolve one more conflict.
Shawn
The following changes since commit cb872cacb2ef57ade6bb0ff41e18b9508a0e073e:
Merge remote-tracking branch 'pza/reset/for_v3.10' into imx/soc (2013-04-12 19:00:44 +0800)
are available in the git repository at:
git://git.linaro.org/people/shawnguo/linux-2.6.git tags/imx-soc-3.10
for you to fetch changes up to 80f72d2d33263429ac6a50b84b2ec5fa681a5e84:
ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock (2013-04-12 19:28:17 +0800)
----------------------------------------------------------------
The imx soc changes for 3.10:
* Enable anatop, well bisa and RBC for suspend to optimize the power
consumption a little bit
* Clock changes for TVE, LDB, PATA, SRTC support
* Add System Reset Controller (SRC) support for imx5 and imx6
* Add initial imx6dl support based on imx6q code
* Kconfig for cpufreq-cpu0, defconfig updates and few other changes
----------------------------------------------------------------
Anson Huang (3):
ARM: imx: enable anatop suspend/resume
ARM: imx: enable periphery well bias for suspend
ARM: imx: enable RBC to support anatop LPM mode
Fabio Estevam (3):
ARM: mach-imx: anatop: Include "common.h"
ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS
ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS
Gwenhael Goavec-Merou (1):
ARM: imx1: mm: add call to mxc_device_init
Markus Pargmann (1):
ARM: imx27, imx5: Add kconfig selects for cpufreq-cpu0
Martin Fuzzey (1):
ARM: i.MX53 Add the cko1, cko2 clock outputs.
Philipp Zabel (14):
ARM i.MX53: Add GPU clocks to clock tree
ARM i.MX6q: export imx6q_revision
ARM i.MX: Add imx_clk_divider_flags and imx_clk_mux_flags
ARM i.MX53: fix ldb di divider and selector clocks
ARM i.MX6q: fix ldb di divider and selector clocks
ARM i.MX6q: Add audio/video PLL post dividers for i.MX6q rev 1.1
ARM i.MX6q: set the LDB serial clock parent to the video PLL
ARM i.MX6q: Add GPU, VPU, IPU, and OpenVG resets to System Reset Controller (SRC)
staging: drm/imx: Use SRC to reset IPU
ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree
ARM i.MX53: Remove unused tve_gate clkdev entry
ARM i.MX53: make tve_ext_sel propagate rate change to PLL
ARM i.MX53: tve_di clock is not part of the CCM, but of TVE
ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock
Sascha Hauer (1):
ARM: i.MX5: Add PATA and SRTC clocks
Shawn Guo (3):
ARM: imx: do not use regmap_read for ANADIG_DIGPROG
ARM: imx: add initial imx6dl support
ARM: imx: do not bring up unavailable cores
.../devicetree/bindings/clock/imx5-clock.txt | 14 ++-
.../devicetree/bindings/clock/imx6q-clock.txt | 3 +
.../devicetree/bindings/reset/fsl,imx-src.txt | 49 ++++++++
.../bindings/staging/imx-drm/fsl-imx-drm.txt | 3 +
arch/arm/Kconfig.debug | 4 +-
arch/arm/configs/imx_v4_v5_defconfig | 1 +
arch/arm/configs/imx_v6_v7_defconfig | 1 +
arch/arm/mach-imx/Kconfig | 10 +-
arch/arm/mach-imx/Makefile | 1 +
arch/arm/mach-imx/anatop.c | 103 ++++++++++++++++
arch/arm/mach-imx/clk-imx51-imx53.c | 75 +++++++++---
arch/arm/mach-imx/clk-imx6q.c | 126 ++++++++++++++++++--
arch/arm/mach-imx/clk.h | 17 +++
arch/arm/mach-imx/common.h | 10 +-
arch/arm/mach-imx/gpc.c | 23 +++-
arch/arm/mach-imx/mach-imx6q.c | 74 ++++--------
arch/arm/mach-imx/mm-imx1.c | 2 +
arch/arm/mach-imx/mxc.h | 11 ++
arch/arm/mach-imx/platsmp.c | 4 +-
arch/arm/mach-imx/pm-imx6q.c | 4 +-
arch/arm/mach-imx/src.c | 65 ++++++++++
drivers/staging/imx-drm/ipu-v3/ipu-common.c | 12 +-
22 files changed, 524 insertions(+), 88 deletions(-)
create mode 100644 Documentation/devicetree/bindings/reset/fsl,imx-src.txt
create mode 100644 arch/arm/mach-imx/anatop.c
More information about the linux-arm-kernel
mailing list