[PATCH 25/26] arm: Don't use create_proc_read_entry() [RFC]
Tony Lindgren
tony at atomide.com
Thu Apr 11 11:48:07 EDT 2013
* David Howells <dhowells at redhat.com> [130411 06:35]:
> Don't use create_proc_read_entry() as that is deprecated, but rather use
> proc_create_data() and seq_file instead.
>
> Signed-off-by: David Howells <dhowells at redhat.com>
> cc: Russell King <linux at arm.linux.org.uk>
> cc: Kevin Hilman <khilman at deeprootsystems.com>
Looks like the mach-omap1/pm.c part we can make into
a debugfs entry as it only contains PM debug data. But
that we can do after this patch.
Acked-by: Tony Lindgren <tony at atomide.com>
> cc: linux-arm-kernel at lists.infradead.org
> cc: linux-omap at vger.kernel.org
> ---
>
> arch/arm/kernel/swp_emulate.c | 42 +++++++++++++-----------------
> arch/arm/mach-omap1/pm.c | 58 +++++++++++++++++------------------------
> 2 files changed, 43 insertions(+), 57 deletions(-)
>
> diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c
> index 0bba47a..087fc32 100644
> --- a/arch/arm/kernel/swp_emulate.c
> +++ b/arch/arm/kernel/swp_emulate.c
> @@ -21,6 +21,7 @@
> #include <linux/init.h>
> #include <linux/kernel.h>
> #include <linux/proc_fs.h>
> +#include <linux/seq_file.h>
> #include <linux/sched.h>
> #include <linux/syscalls.h>
> #include <linux/perf_event.h>
> @@ -79,27 +80,27 @@ static unsigned long abtcounter;
> static pid_t previous_pid;
>
> #ifdef CONFIG_PROC_FS
> -static int proc_read_status(char *page, char **start, off_t off, int count,
> - int *eof, void *data)
> +static int proc_status_show(struct seq_file *m, void *v)
> {
> - char *p = page;
> - int len;
> -
> - p += sprintf(p, "Emulated SWP:\t\t%lu\n", swpcounter);
> - p += sprintf(p, "Emulated SWPB:\t\t%lu\n", swpbcounter);
> - p += sprintf(p, "Aborted SWP{B}:\t\t%lu\n", abtcounter);
> + seq_printf(m, "Emulated SWP:\t\t%lu\n", swpcounter);
> + seq_printf(m, "Emulated SWPB:\t\t%lu\n", swpbcounter);
> + seq_printf(m, "Aborted SWP{B}:\t\t%lu\n", abtcounter);
> if (previous_pid != 0)
> - p += sprintf(p, "Last process:\t\t%d\n", previous_pid);
> -
> - len = (p - page) - off;
> - if (len < 0)
> - len = 0;
> -
> - *eof = (len <= count) ? 1 : 0;
> - *start = page + off;
> + seq_printf(m, "Last process:\t\t%d\n", previous_pid);
> + return 0;
> +}
>
> - return len;
> +static int proc_status_open(struct inode *inode, struct file *file)
> +{
> + return single_open(file, proc_status_show, PDE_DATA(inode));
> }
> +
> +static const struct file_operations proc_status_fops = {
> + .open = proc_status_open,
> + .read = seq_read,
> + .llseek = seq_lseek,
> + .release = seq_release,
> +};
> #endif
>
> /*
> @@ -266,12 +267,7 @@ static struct undef_hook swp_hook = {
> static int __init swp_emulation_init(void)
> {
> #ifdef CONFIG_PROC_FS
> - struct proc_dir_entry *res;
> -
> - res = create_proc_read_entry("cpu/swp_emulation", S_IRUGO, NULL,
> - proc_read_status, NULL);
> -
> - if (!res)
> + if (!proc_create("cpu/swp_emulation", S_IRUGO, NULL, &proc_status_fops))
> return -ENOMEM;
> #endif /* CONFIG_PROC_FS */
>
> diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
> index 7a7690a..2645e37 100644
> --- a/arch/arm/mach-omap1/pm.c
> +++ b/arch/arm/mach-omap1/pm.c
> @@ -38,6 +38,7 @@
> #include <linux/suspend.h>
> #include <linux/sched.h>
> #include <linux/proc_fs.h>
> +#include <linux/seq_file.h>
> #include <linux/interrupt.h>
> #include <linux/sysfs.h>
> #include <linux/module.h>
> @@ -423,22 +424,11 @@ void omap1_pm_suspend(void)
> }
>
> #if defined(DEBUG) && defined(CONFIG_PROC_FS)
> -static int g_read_completed;
> -
> /*
> * Read system PM registers for debugging
> */
> -static int omap_pm_read_proc(
> - char *page_buffer,
> - char **my_first_byte,
> - off_t virtual_start,
> - int length,
> - int *eof,
> - void *data)
> +static int omap_pm_proc_show(struct seq_file *m, void *v)
> {
> - int my_buffer_offset = 0;
> - char * const my_base = page_buffer;
> -
> ARM_SAVE(ARM_CKCTL);
> ARM_SAVE(ARM_IDLECT1);
> ARM_SAVE(ARM_IDLECT2);
> @@ -479,10 +469,7 @@ static int omap_pm_read_proc(
> MPUI1610_SAVE(EMIFS_CONFIG);
> }
>
> - if (virtual_start == 0) {
> - g_read_completed = 0;
> -
> - my_buffer_offset += sprintf(my_base + my_buffer_offset,
> + seq_printf(m,
> "ARM_CKCTL_REG: 0x%-8x \n"
> "ARM_IDLECT1_REG: 0x%-8x \n"
> "ARM_IDLECT2_REG: 0x%-8x \n"
> @@ -512,8 +499,8 @@ static int omap_pm_read_proc(
> ULPD_SHOW(ULPD_STATUS_REQ),
> ULPD_SHOW(ULPD_POWER_CTRL));
>
> - if (cpu_is_omap7xx()) {
> - my_buffer_offset += sprintf(my_base + my_buffer_offset,
> + if (cpu_is_omap7xx()) {
> + seq_printf(m,
> "MPUI7XX_CTRL_REG 0x%-8x \n"
> "MPUI7XX_DSP_STATUS_REG: 0x%-8x \n"
> "MPUI7XX_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
> @@ -526,8 +513,8 @@ static int omap_pm_read_proc(
> MPUI7XX_SHOW(MPUI_DSP_API_CONFIG),
> MPUI7XX_SHOW(EMIFF_SDRAM_CONFIG),
> MPUI7XX_SHOW(EMIFS_CONFIG));
> - } else if (cpu_is_omap15xx()) {
> - my_buffer_offset += sprintf(my_base + my_buffer_offset,
> + } else if (cpu_is_omap15xx()) {
> + seq_printf(m,
> "MPUI1510_CTRL_REG 0x%-8x \n"
> "MPUI1510_DSP_STATUS_REG: 0x%-8x \n"
> "MPUI1510_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
> @@ -540,8 +527,8 @@ static int omap_pm_read_proc(
> MPUI1510_SHOW(MPUI_DSP_API_CONFIG),
> MPUI1510_SHOW(EMIFF_SDRAM_CONFIG),
> MPUI1510_SHOW(EMIFS_CONFIG));
> - } else if (cpu_is_omap16xx()) {
> - my_buffer_offset += sprintf(my_base + my_buffer_offset,
> + } else if (cpu_is_omap16xx()) {
> + seq_printf(m,
> "MPUI1610_CTRL_REG 0x%-8x \n"
> "MPUI1610_DSP_STATUS_REG: 0x%-8x \n"
> "MPUI1610_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
> @@ -554,25 +541,28 @@ static int omap_pm_read_proc(
> MPUI1610_SHOW(MPUI_DSP_API_CONFIG),
> MPUI1610_SHOW(EMIFF_SDRAM_CONFIG),
> MPUI1610_SHOW(EMIFS_CONFIG));
> - }
> -
> - g_read_completed++;
> - } else if (g_read_completed >= 1) {
> - *eof = 1;
> - return 0;
> }
> - g_read_completed++;
>
> - *my_first_byte = page_buffer;
> - return my_buffer_offset;
> + return 0;
> +}
> +
> +static int omap_pm_proc_open(struct inode *inode, struct file *file)
> +{
> + return single_open(file, omap_pm_proc_show, PDE_DATA(inode));
> }
>
> +static const struct file_operations omap_pm_proc_fops = {
> + .open = omap_pm_proc_open,
> + .read = seq_read,
> + .llseek = seq_lseek,
> + .release = seq_release,
> +};
> +
> static void omap_pm_init_proc(void)
> {
> /* XXX Appears to leak memory */
> - create_proc_read_entry("driver/omap_pm",
> - S_IWUSR | S_IRUGO, NULL,
> - omap_pm_read_proc, NULL);
> + create_proc("driver/omap_pm", S_IWUSR | S_IRUGO, NULL,
> + &omap_pm_proc_fops);
> }
>
> #endif /* DEBUG && CONFIG_PROC_FS */
>
More information about the linux-arm-kernel
mailing list