[PATCH v2] pinctrl: Add pinctrl-s3c24xx driver
Tomasz Figa
t.figa at samsung.com
Thu Apr 11 04:54:45 EDT 2013
Hi Heiko,
As previously, generally looks good to me, but see my comments inline.
On Thursday 11 of April 2013 01:16:41 Heiko Stübner wrote:
> The s3c24xx pins follow a similar pattern as the other Samsung SoCs and
> can therefore reuse the already introduced infrastructure.
>
> The s3c24xx SoCs have one design oddity in that the first 4 external
> interrupts do not reside in the eint pending register but in the main
> interrupt controller instead. We solve this by forwarding the external
> interrupt from the main controller into the irq domain of the pin bank.
> The masking/acking of these interrupts is handled in the same way.
>
> Furthermore the S3C2412/2413 SoCs contain another oddity in that they
> keep the same 4 eints in the main interrupt controller and eintpend
> register and requiring ack operations to happen in both. To solve this
> a ctrl_type enum is introduced which can keep the type of controller
Hmm, I think you forgot to edit the commit message, since we decided to
replace ctrl_type with another compatible string.
> in the samsung_pin_ctrl struct for later retrieval.
>
> The ctrl_type enum contains only S3C24XX and S3C2412 types, as the
> eint-speciality is currently the only use-case. But it can be expaned
> if other SoCs gain special handling requirements later on.
>
> Signed-off-by: Heiko Stuebner <heiko at sntech.de>
> ---
> changes since v1:
> - address comments from Tomasz Figa:
> * split handling functions for eints 0-3 for s3c2412 and all others
> * change the handling for s3c2412 eints 0-3 in that they now use
> chained_irq_* for the outer parent interrupt
OK, so you finally decided to use the way I suggested. Have you managed to do
some testing on a S3C2412?
>
> .../bindings/pinctrl/samsung-pinctrl.txt | 8 +
> drivers/gpio/gpio-samsung.c | 4 +
> drivers/pinctrl/Kconfig | 5 +
> drivers/pinctrl/Makefile | 1 +
> drivers/pinctrl/pinctrl-s3c24xx.c | 664
> ++++++++++++++++++++ drivers/pinctrl/pinctrl-samsung.c |
> 10 +
> drivers/pinctrl/pinctrl-samsung.h | 16 +
> 7 files changed, 708 insertions(+), 0 deletions(-)
> create mode 100644 drivers/pinctrl/pinctrl-s3c24xx.c
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
> b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt index
> c70fca1..e4443e3 100644
> --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
> @@ -7,6 +7,10 @@ on-chip controllers onto these pads.
>
> Required Properties:
> - compatible: should be one of the following.
> + - "samsung,s3c2413-pinctrl": for S3C64xx-compatible pin-controller,
> + - "samsung,s3c2416-pinctrl": for S3C64xx-compatible pin-controller,
> + - "samsung,s3c2440-pinctrl": for S3C64xx-compatible pin-controller,
> + - "samsung,s3c2450-pinctrl": for S3C64xx-compatible pin-controller,
> - "samsung,s3c64xx-pinctrl": for S3C64xx-compatible pin-controller,
> - "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller.
> - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller.
> @@ -106,6 +110,10 @@ B. External Wakeup Interrupts: For supporting external
> wakeup interrupts, a
>
> - compatible: identifies the type of the external wakeup interrupt
> controller The possible values are:
> + - samsung,s3c2410-wakeup-eint: represents wakeup interrupt controller
> + found on Samsung S3C24xx SoCs except S3C2412 and S3C2413,
> + - samsung,s3c2412-wakeup-eint: represents wakeup interrupt controller
> + found on Samsung S3C2412 and S3C2413 SoCs,
> - samsung,s3c64xx-wakeup-eint: represents wakeup interrupt controller
> found on Samsung S3C64xx SoCs,
> - samsung,exynos4210-wakeup-eint: represents wakeup interrupt
> controller diff --git a/drivers/gpio/gpio-samsung.c
> b/drivers/gpio/gpio-samsung.c index dc06a6f..73017b9 100644
> --- a/drivers/gpio/gpio-samsung.c
> +++ b/drivers/gpio/gpio-samsung.c
> @@ -3026,6 +3026,10 @@ static __init int samsung_gpiolib_init(void)
> */
> struct device_node *pctrl_np;
> static const struct of_device_id exynos_pinctrl_ids[] = {
> + { .compatible = "samsung,s3c2413-pinctrl", },
> + { .compatible = "samsung,s3c2416-pinctrl", },
> + { .compatible = "samsung,s3c2440-pinctrl", },
> + { .compatible = "samsung,s3c2450-pinctrl", },
> { .compatible = "samsung,s3c64xx-pinctrl", },
> { .compatible = "samsung,exynos4210-pinctrl", },
> { .compatible = "samsung,exynos4x12-pinctrl", },
> diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
> index 7402ac9..58d73ac 100644
> --- a/drivers/pinctrl/Kconfig
> +++ b/drivers/pinctrl/Kconfig
> @@ -226,6 +226,11 @@ config PINCTRL_EXYNOS5440
> select PINMUX
> select PINCONF
>
> +config PINCTRL_S3C24XX
> + bool "Samsung S3C24XX SoC pinctrl driver"
> + depends on ARCH_S3C24XX
> + select PINCTRL_SAMSUNG
> +
> config PINCTRL_S3C64XX
> bool "Samsung S3C64XX SoC pinctrl driver"
> depends on ARCH_S3C64XX
> diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
> index 21d34c2..1ccdfd8 100644
> --- a/drivers/pinctrl/Makefile
> +++ b/drivers/pinctrl/Makefile
> @@ -45,6 +45,7 @@ obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o
> obj-$(CONFIG_PINCTRL_SAMSUNG) += pinctrl-samsung.o
> obj-$(CONFIG_PINCTRL_EXYNOS) += pinctrl-exynos.o
> obj-$(CONFIG_PINCTRL_EXYNOS5440) += pinctrl-exynos5440.o
> +obj-$(CONFIG_PINCTRL_S3C24XX) += pinctrl-s3c24xx.o
> obj-$(CONFIG_PINCTRL_S3C64XX) += pinctrl-s3c64xx.o
> obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o
> obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o
> diff --git a/drivers/pinctrl/pinctrl-s3c24xx.c
> b/drivers/pinctrl/pinctrl-s3c24xx.c new file mode 100644
> index 0000000..8dffa2a
> --- /dev/null
> +++ b/drivers/pinctrl/pinctrl-s3c24xx.c
> @@ -0,0 +1,664 @@
> +/*
> + * S3C24XX specific support for Samsung pinctrl/gpiolib driver.
> + *
> + * Copyright (c) 2013 Heiko Stuebner <heiko at sntech.de>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This file contains the SamsungS3C24XX specific information required by
> the + * the Samsung pinctrl/gpiolib driver. It also includes the
> implementation of + * external gpio and wakeup interrupt support.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/device.h>
> +#include <linux/interrupt.h>
> +#include <linux/irqdomain.h>
> +#include <linux/irq.h>
> +#include <linux/of_irq.h>
> +#include <linux/io.h>
> +#include <linux/slab.h>
> +#include <linux/err.h>
> +
> +#include <asm/mach/irq.h>
> +
> +#include "pinctrl-samsung.h"
> +
> +#define NUM_EINT 24
> +#define NUM_EINT_IRQ 6
> +#define EINT_MAX_PER_GROUP 8
> +
> +#define EINTPEND_REG 0xa8
> +#define EINTMASK_REG 0xa4
> +
> +#define EINT_GROUP(i) ((int)((i) / EINT_MAX_PER_GROUP))
> +#define EINT_REG(i) ((EINT_GROUP(i) * 4) + 0x88)
> +#define EINT_OFFS(i) ((i) % EINT_MAX_PER_GROUP * 4)
> +
> +#define EINT_LEVEL_LOW 0
> +#define EINT_LEVEL_HIGH 1
> +#define EINT_EDGE_FALLING 2
> +#define EINT_EDGE_RISING 4
> +#define EINT_EDGE_BOTH 6
> +#define EINT_MASK 0xf
> +
> +static struct samsung_pin_bank_type bank_type_1bit = {
> + .fld_width = { 1, 1, },
> + .reg_offset = { 0x00, 0x04, },
> +};
> +
> +static struct samsung_pin_bank_type bank_type_2bit = {
> + .fld_width = { 2, 1, 2, },
> + .reg_offset = { 0x00, 0x04, 0x08, },
> +};
> +
> +#define PIN_BANK_A(pins, reg, id) \
> + { \
> + .type = &bank_type_1bit, \
> + .pctl_offset = reg, \
> + .nr_pins = pins, \
> + .eint_type = EINT_TYPE_NONE, \
> + .name = id \
> + }
> +
> +#define PIN_BANK_2BIT(pins, reg, id) \
> + { \
> + .type = &bank_type_2bit, \
> + .pctl_offset = reg, \
> + .nr_pins = pins, \
> + .eint_type = EINT_TYPE_NONE, \
> + .name = id \
> + }
> +
> +#define PIN_BANK_2BIT_EINTW(pins, reg, id, eoffs, emask)\
> + { \
> + .type = &bank_type_2bit, \
> + .pctl_offset = reg, \
> + .nr_pins = pins, \
> + .eint_type = EINT_TYPE_WKUP, \
> + .eint_func = 2, \
> + .eint_mask = emask, \
> + .eint_offset = eoffs, \
> + .name = id \
> + }
> +
> +/**
> + * struct s3c24xx_eint_data: EINT common data
> + * @drvdata: pin controller driver data
> + * @domains: IRQ domains of particular EINT interrupts
@parents:
> + */
> +struct s3c24xx_eint_data {
> + struct samsung_pinctrl_drv_data *drvdata;
> + struct irq_domain *domains[NUM_EINT];
> + int parents[NUM_EINT_IRQ];
> +};
> +
I wonder if this struct should be documented as well.
> +struct s3c24xx_eint_domain_data {
> + struct samsung_pin_bank *bank;
> + struct s3c24xx_eint_data *eint_data;
> + bool eint0_3_parent_only;
> +};
> +
> +static int s3c24xx_eint_get_trigger(unsigned int type)
> +{
> + int trigger;
> +
> + switch (type) {
> + case IRQ_TYPE_EDGE_RISING:
> + trigger = EINT_EDGE_RISING;
> + break;
> + case IRQ_TYPE_EDGE_FALLING:
> + trigger = EINT_EDGE_FALLING;
> + break;
> + case IRQ_TYPE_EDGE_BOTH:
> + trigger = EINT_EDGE_BOTH;
> + break;
> + case IRQ_TYPE_LEVEL_HIGH:
> + trigger = EINT_LEVEL_HIGH;
> + break;
> + case IRQ_TYPE_LEVEL_LOW:
> + trigger = EINT_LEVEL_LOW;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return trigger;
> +}
> +
> +static void s3c24xx_eint_set_handler(unsigned int irq, unsigned int type)
> +{
> + /* Edge- and level-triggered interrupts need different handlers */
> + if (type & IRQ_TYPE_EDGE_BOTH)
> + __irq_set_handler_locked(irq, handle_edge_irq);
> + else
> + __irq_set_handler_locked(irq, handle_level_irq);
> +}
> +
> +static void s3c24xx_eint_set_function(struct samsung_pinctrl_drv_data *d,
> + struct samsung_pin_bank *bank, int pin)
> +{
> + struct samsung_pin_bank_type *bank_type = bank->type;
> + unsigned long flags;
> + void __iomem *reg;
> + u8 shift;
> + u32 mask;
> + u32 val;
> +
> + /* Make sure that pin is configured as interrupt */
> + reg = d->virt_base + bank->pctl_offset;
> + shift = pin * bank_type->fld_width[PINCFG_TYPE_FUNC];
> + mask = (1 << bank_type->fld_width[PINCFG_TYPE_FUNC]) - 1;
> +
> + spin_lock_irqsave(&bank->slock, flags);
> +
> + val = readl(reg);
> + val &= ~(mask << shift);
> + val |= bank->eint_func << shift;
> + writel(val, reg);
> +
> + spin_unlock_irqrestore(&bank->slock, flags);
> +}
> +
> +static int s3c24xx_eint_type(struct irq_data *data, unsigned int type)
> +{
> + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
> + struct samsung_pinctrl_drv_data *d = bank->drvdata;
> + int index = bank->eint_offset + data->hwirq;
> + void __iomem *reg;
> + int trigger;
> + u8 shift;
> + u32 val;
> +
> + trigger = s3c24xx_eint_get_trigger(type);
> + if (trigger < 0) {
> + dev_err(d->dev, "unsupported external interrupt type\n");
> + return -EINVAL;
> + }
> +
> + s3c24xx_eint_set_handler(data->irq, type);
> +
> + /* Set up interrupt trigger */
> + reg = d->virt_base + EINT_REG(index);
> + shift = EINT_OFFS(index);
> +
> + val = readl(reg);
> + val &= ~(EINT_MASK << shift);
> + val |= trigger << shift;
> + writel(val, reg);
> +
> + s3c24xx_eint_set_function(d, bank, data->hwirq);
> +
> + return 0;
> +}
> +
> +/* handling of EINTs 0-3 on all except S3C2412 and S3C2413 */
> +
> +static void s3c2410_eint0_3_ack(struct irq_data *data)
> +{
> + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
> + struct s3c24xx_eint_domain_data *ddata = bank->irq_domain->host_data;
> + struct s3c24xx_eint_data *eint_data = ddata->eint_data;
> + int parent_irq = eint_data->parents[data->hwirq];
> + struct irq_chip *parent_chip = irq_get_chip(parent_irq);
> +
> + if (likely(parent_chip))
Hmm, is it possible that there is no parent chip here?
> + parent_chip->irq_ack(irq_get_irq_data(parent_irq));
> +}
> +
> +static void s3c2410_eint0_3_mask(struct irq_data *data)
> +{
> + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
> + struct s3c24xx_eint_domain_data *ddata = bank->irq_domain->host_data;
> + struct s3c24xx_eint_data *eint_data = ddata->eint_data;
> + int parent_irq = eint_data->parents[data->hwirq];
> + struct irq_chip *parent_chip = irq_get_chip(parent_irq);
> +
> + if (likely(parent_chip))
Ditto.
> + parent_chip->irq_mask(irq_get_irq_data(parent_irq));
> +}
> +
> +static void s3c2410_eint0_3_unmask(struct irq_data *data)
> +{
> + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
> + struct s3c24xx_eint_domain_data *ddata = bank->irq_domain->host_data;
> + struct s3c24xx_eint_data *eint_data = ddata->eint_data;
> + int parent_irq = eint_data->parents[data->hwirq];
> + struct irq_chip *parent_chip = irq_get_chip(parent_irq);
> +
> + if (likely(parent_chip))
Ditto.
> + parent_chip->irq_unmask(irq_get_irq_data(parent_irq));
> +}
> +
> +static struct irq_chip s3c2410_eint0_3_chip = {
> + .name = "s3c2410-eint0_3",
> + .irq_ack = s3c2410_eint0_3_ack,
> + .irq_mask = s3c2410_eint0_3_mask,
> + .irq_unmask = s3c2410_eint0_3_unmask,
> + .irq_set_type = s3c24xx_eint_type,
> +};
> +
> +static void s3c2410_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
> +{
> + struct irq_data *data = irq_desc_get_irq_data(desc);
> + struct s3c24xx_eint_data *eint_data = irq_get_handler_data(irq);
> + unsigned int virq;
> +
> + /* the first 4 eints have a simple 1 to 1 mapping */
> + virq = irq_linear_revmap(eint_data->domains[data->hwirq], data->hwirq);
> + /* Something must be really wrong if an unmapped EINT
> + * was unmasked...
> + */
> + BUG_ON(!virq);
> +
> + generic_handle_irq(virq);
> +}
> +
> +/* handling of EINTs 0-3 on S3C2412 and S3C2413 */
> +
> +static void s3c2412_eint0_3_ack(struct irq_data *data)
> +{
> + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
> + struct samsung_pinctrl_drv_data *d = bank->drvdata;
> +
> + unsigned long bitval = 1UL << data->hwirq;
> + writel(bitval, d->virt_base + EINTPEND_REG);
> +}
> +
> +static void s3c2412_eint0_3_mask(struct irq_data *data)
> +{
> + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
> + struct samsung_pinctrl_drv_data *d = bank->drvdata;
> + unsigned long mask;
> +
> + mask = readl(d->virt_base + EINTMASK_REG);
> + mask |= (1UL << data->hwirq);
> + writel(mask, d->virt_base + EINTMASK_REG);
> +}
> +
> +static void s3c2412_eint0_3_unmask(struct irq_data *data)
> +{
> + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
> + struct samsung_pinctrl_drv_data *d = bank->drvdata;
> + unsigned long mask;
> +
> + mask = readl(d->virt_base + EINTMASK_REG);
> + mask &= ~(1UL << data->hwirq);
> + writel(mask, d->virt_base + EINTMASK_REG);
> +}
> +
> +static struct irq_chip s3c2412_eint0_3_chip = {
> + .name = "s3c2412-eint0_3",
> + .irq_ack = s3c2412_eint0_3_ack,
> + .irq_mask = s3c2412_eint0_3_mask,
> + .irq_unmask = s3c2412_eint0_3_unmask,
> + .irq_set_type = s3c24xx_eint_type,
> +};
> +
> +static void s3c2412_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
> +{
> + struct irq_chip *chip = irq_get_chip(irq);
> + struct irq_data *data = irq_desc_get_irq_data(desc);
> + struct s3c24xx_eint_data *eint_data = irq_get_handler_data(irq);
> + unsigned int virq;
> +
> + chained_irq_enter(chip, desc);
> +
> + /* the first 4 eints have a simple 1 to 1 mapping */
> + virq = irq_linear_revmap(eint_data->domains[data->hwirq], data->hwirq);
> + /* Something must be really wrong if an unmapped EINT
> + * was unmasked...
> + */
> + BUG_ON(!virq);
> +
> + generic_handle_irq(virq);
> +
> + chained_irq_exit(chip, desc);
> +}
> +
> +/* handling of all other eints */
> +
> +static void s3c24xx_eint_ack(struct irq_data *data)
> +{
> + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
> + struct samsung_pinctrl_drv_data *d = bank->drvdata;
> + unsigned char index = bank->eint_offset + data->hwirq;
> +
> + writel(1UL << index, d->virt_base + EINTPEND_REG);
> +}
> +
> +static void s3c24xx_eint_mask(struct irq_data *data)
> +{
> + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
> + struct samsung_pinctrl_drv_data *d = bank->drvdata;
> + unsigned char index = bank->eint_offset + data->hwirq;
> + unsigned long mask;
> +
> + mask = readl(d->virt_base + EINTMASK_REG);
> + mask |= (1UL << index);
> + writel(mask, d->virt_base + EINTMASK_REG);
> +}
> +
> +static void s3c24xx_eint_unmask(struct irq_data *data)
> +{
> + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data);
> + struct samsung_pinctrl_drv_data *d = bank->drvdata;
> + unsigned char index = bank->eint_offset + data->hwirq;
> + unsigned long mask;
> +
> + mask = readl(d->virt_base + EINTMASK_REG);
> + mask &= ~(1UL << index);
> + writel(mask, d->virt_base + EINTMASK_REG);
> +}
> +
> +static struct irq_chip s3c24xx_eint_chip = {
> + .name = "s3c-eint",
> + .irq_ack = s3c24xx_eint_ack,
> + .irq_mask = s3c24xx_eint_mask,
> + .irq_unmask = s3c24xx_eint_unmask,
> + .irq_set_type = s3c24xx_eint_type,
> +};
> +
> +static inline void s3c24xx_demux_eint(unsigned int irq, struct irq_desc
> *desc, + u32 offset, u32 range)
> +{
> + struct irq_chip *chip = irq_get_chip(irq);
> + struct s3c24xx_eint_data *data = irq_get_handler_data(irq);
> + struct samsung_pinctrl_drv_data *d = data->drvdata;
> + unsigned int pend, mask;
> +
> + chained_irq_enter(chip, desc);
> +
> + pend = readl(d->virt_base + EINTPEND_REG);
> + mask = readl(d->virt_base + EINTMASK_REG);
> +
> + pend &= ~mask;
> + pend &= range;
> +
> + while (pend) {
> + unsigned int virq;
> +
> + irq = __ffs(pend);
> + pend &= ~(1 << irq);
> + virq = irq_linear_revmap(data->domains[irq], irq - offset);
> + /* Something must be really wrong if an unmapped EINT
> + * was unmasked...
> + */
> + BUG_ON(!virq);
> +
> + generic_handle_irq(virq);
> + }
> +
> + chained_irq_exit(chip, desc);
> +}
> +
> +static void s3c24xx_demux_eint4_7(unsigned int irq, struct irq_desc *desc)
> +{
> + s3c24xx_demux_eint(irq, desc, 0, 0xf0);
> +}
> +
> +static void s3c24xx_demux_eint8_23(unsigned int irq, struct irq_desc *desc)
> +{
> + s3c24xx_demux_eint(irq, desc, 8, 0xffff00);
> +}
> +
> +static irq_flow_handler_t s3c2410_eint_handlers[NUM_EINT_IRQ] = {
> + s3c2410_demux_eint0_3,
> + s3c2410_demux_eint0_3,
> + s3c2410_demux_eint0_3,
> + s3c2410_demux_eint0_3,
> + s3c24xx_demux_eint4_7,
> + s3c24xx_demux_eint8_23,
> +};
> +
> +static irq_flow_handler_t s3c2412_eint_handlers[NUM_EINT_IRQ] = {
> + s3c2412_demux_eint0_3,
> + s3c2412_demux_eint0_3,
> + s3c2412_demux_eint0_3,
> + s3c2412_demux_eint0_3,
> + s3c24xx_demux_eint4_7,
> + s3c24xx_demux_eint8_23,
> +};
> +
> +static int s3c24xx_gpf_irq_map(struct irq_domain *h, unsigned int virq,
> + irq_hw_number_t hw)
> +{
> + struct s3c24xx_eint_domain_data *ddata = h->host_data;
> + struct samsung_pin_bank *bank = ddata->bank;
> +
> + if (!(bank->eint_mask & (1 << (bank->eint_offset + hw))))
> + return -EINVAL;
> +
> + if (hw <= 3) {
> + if (ddata->eint0_3_parent_only)
> + irq_set_chip_and_handler(virq, &s3c2410_eint0_3_chip,
> + handle_edge_irq);
> + else
> + irq_set_chip_and_handler(virq, &s3c2412_eint0_3_chip,
> + handle_edge_irq);
> + } else {
> + irq_set_chip_and_handler(virq, &s3c24xx_eint_chip,
> + handle_edge_irq);
> + }
> + irq_set_chip_data(virq, bank);
> + set_irq_flags(virq, IRQF_VALID);
> + return 0;
> +}
> +
> +static const struct irq_domain_ops s3c24xx_gpf_irq_ops = {
> + .map = s3c24xx_gpf_irq_map,
> + .xlate = irq_domain_xlate_twocell,
> +};
> +
> +static int s3c24xx_gpg_irq_map(struct irq_domain *h, unsigned int virq,
> + irq_hw_number_t hw)
> +{
> + struct s3c24xx_eint_domain_data *ddata = h->host_data;
> + struct samsung_pin_bank *bank = ddata->bank;
> +
> + if (!(bank->eint_mask & (1 << (bank->eint_offset + hw))))
> + return -EINVAL;
> +
> + irq_set_chip_and_handler(virq, &s3c24xx_eint_chip, handle_edge_irq);
> + irq_set_chip_data(virq, bank);
> + set_irq_flags(virq, IRQF_VALID);
> + return 0;
> +}
> +
> +static const struct irq_domain_ops s3c24xx_gpg_irq_ops = {
> + .map = s3c24xx_gpg_irq_map,
> + .xlate = irq_domain_xlate_twocell,
> +};
> +
> +static const struct of_device_id s3c24xx_eint_irq_ids[] = {
> + { .compatible = "samsung,s3c2410-wakeup-eint", .data = (void *)1 },
> + { .compatible = "samsung,s3c2412-wakeup-eint", .data = (void *)0 },
> + { }
> +};
> +
> +static int s3c24xx_eint_init(struct samsung_pinctrl_drv_data *d)
> +{
> + struct device *dev = d->dev;
> + const struct of_device_id *match;
> + struct device_node *eint_np = NULL;
> + struct device_node *np;
> + struct samsung_pin_bank *bank;
> + struct s3c24xx_eint_data *eint_data;
> + const struct irq_domain_ops *ops;
> + unsigned int i;
> + bool eint0_3_parent_only;
> + irq_flow_handler_t *handlers;
> +
> + for_each_child_of_node(dev->of_node, np) {
> + match = of_match_node(s3c24xx_eint_irq_ids, np);
> + if (match) {
> + eint_np = np;
> + eint0_3_parent_only = (bool)match->data;
> + break;
> + }
> + }
> + if (!eint_np)
> + return -ENODEV;
> +
> + eint_data = devm_kzalloc(dev, sizeof(*eint_data), GFP_KERNEL);
> + if (!eint_data) {
> + dev_err(dev, "could not allocate memory for wkup eint data\n");
> + return -ENOMEM;
> + }
> + eint_data->drvdata = d;
> +
> + handlers = eint0_3_parent_only ? s3c2410_eint_handlers
> + : s3c2412_eint_handlers;
> + for (i = 0; i < NUM_EINT_IRQ; ++i) {
> + unsigned int irq;
> +
> + irq = irq_of_parse_and_map(eint_np, i);
> + if (!irq) {
> + dev_err(dev, "failed to get wakeup EINT IRQ %d\n", i);
> + return -ENXIO;
> + }
> +
> + eint_data->parents[i] = irq;
> + irq_set_chained_handler(irq, handlers[i]);
> + irq_set_handler_data(irq, eint_data);
> + }
> +
> + bank = d->ctrl->pin_banks;
> + for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) {
> + struct s3c24xx_eint_domain_data *ddata;
> + unsigned int mask;
> + unsigned int irq;
> + unsigned int pin;
> +
> + if (bank->eint_type != EINT_TYPE_WKUP)
> + continue;
> +
> + ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
> + if (!ddata) {
> + dev_err(dev, "failed to allocate domain data\n");
> + return -ENOMEM;
> + }
> + ddata->bank = bank;
> + ddata->eint_data = eint_data;
> + ddata->eint0_3_parent_only = eint0_3_parent_only;
> +
> + ops = (bank->eint_offset == 0) ? &s3c24xx_gpf_irq_ops
> + : &s3c24xx_gpg_irq_ops;
> +
> + bank->irq_domain = irq_domain_add_linear(bank->of_node,
> + bank->nr_pins, ops, ddata);
> + if (!bank->irq_domain) {
> + dev_err(dev, "wkup irq domain add failed\n");
> + return -ENXIO;
> + }
> +
> + irq = bank->eint_offset;
> + mask = bank->eint_mask;
> + for (pin = 0; mask; ++pin, mask >>= 1) {
> + if (irq > NUM_EINT)
> + break;
> + if (!(mask & 1))
> + continue;
> + eint_data->domains[irq] = bank->irq_domain;
> + ++irq;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static struct samsung_pin_bank s3c2413_pin_banks[] = {
> + PIN_BANK_A(23, 0x000, "gpa"),
> + PIN_BANK_2BIT(11, 0x010, "gpb"),
> + PIN_BANK_2BIT(16, 0x020, "gpc"),
> + PIN_BANK_2BIT(16, 0x030, "gpd"),
> + PIN_BANK_2BIT(16, 0x040, "gpe"),
> + PIN_BANK_2BIT_EINTW(8, 0x050, "gpf", 0, 0xff),
> + PIN_BANK_2BIT_EINTW(16, 0x060, "gpg", 8, 0xffff00),
> + PIN_BANK_2BIT(11, 0x070, "gph"),
> + PIN_BANK_2BIT(13, 0x080, "gpj"),
> +};
> +
> +struct samsung_pin_ctrl s3c2413_pin_ctrl[] = {
> + {
> + .pin_banks = s3c2413_pin_banks,
> + .nr_banks = ARRAY_SIZE(s3c2413_pin_banks),
> + .eint_wkup_init = s3c24xx_eint_init,
> + .label = "S3C2413-GPIO",
> + .type = S3C2412,
This should be removed as well, shouldn't it?
> + },
> +};
> +
> +static struct samsung_pin_bank s3c2416_pin_banks[] = {
> + PIN_BANK_A(27, 0x000, "gpa"),
> + PIN_BANK_2BIT(11, 0x010, "gpb"),
> + PIN_BANK_2BIT(16, 0x020, "gpc"),
> + PIN_BANK_2BIT(16, 0x030, "gpd"),
> + PIN_BANK_2BIT(16, 0x040, "gpe"),
> + PIN_BANK_2BIT_EINTW(8, 0x050, "gpf", 0, 0xff),
> + PIN_BANK_2BIT_EINTW(8, 0x060, "gpg", 8, 0xff00),
> + PIN_BANK_2BIT(15, 0x070, "gph"),
> + PIN_BANK_2BIT(16, 0x0e0, "gpk"),
> + PIN_BANK_2BIT(14, 0x0f0, "gpl"),
> + PIN_BANK_2BIT(2, 0x100, "gpm"),
> +};
> +
> +struct samsung_pin_ctrl s3c2416_pin_ctrl[] = {
> + {
> + .pin_banks = s3c2416_pin_banks,
> + .nr_banks = ARRAY_SIZE(s3c2416_pin_banks),
> + .eint_wkup_init = s3c24xx_eint_init,
> + .label = "S3C2416-GPIO",
> + .type = S3C24XX,
Ditto.
> + },
> +};
> +
> +static struct samsung_pin_bank s3c2440_pin_banks[] = {
> + PIN_BANK_A(25, 0x000, "gpa"),
> + PIN_BANK_2BIT(11, 0x010, "gpb"),
> + PIN_BANK_2BIT(16, 0x020, "gpc"),
> + PIN_BANK_2BIT(16, 0x030, "gpd"),
> + PIN_BANK_2BIT(16, 0x040, "gpe"),
> + PIN_BANK_2BIT_EINTW(8, 0x050, "gpf", 0, 0xff),
> + PIN_BANK_2BIT_EINTW(16, 0x060, "gpg", 8, 0xffff00),
> + PIN_BANK_2BIT(11, 0x070, "gph"),
> + PIN_BANK_2BIT(13, 0x0d0, "gpj"),
> +};
> +
> +struct samsung_pin_ctrl s3c2440_pin_ctrl[] = {
> + {
> + .pin_banks = s3c2440_pin_banks,
> + .nr_banks = ARRAY_SIZE(s3c2440_pin_banks),
> + .eint_wkup_init = s3c24xx_eint_init,
> + .label = "S3C2440-GPIO",
> + .type = S3C24XX,
Ditto.
> + },
> +};
> +
> +static struct samsung_pin_bank s3c2450_pin_banks[] = {
> + PIN_BANK_A(28, 0x000, "gpa"),
> + PIN_BANK_2BIT(11, 0x010, "gpb"),
> + PIN_BANK_2BIT(16, 0x020, "gpc"),
> + PIN_BANK_2BIT(16, 0x030, "gpd"),
> + PIN_BANK_2BIT(16, 0x040, "gpe"),
> + PIN_BANK_2BIT_EINTW(8, 0x050, "gpf", 0, 0xff),
> + PIN_BANK_2BIT_EINTW(16, 0x060, "gpg", 8, 0xffff00),
> + PIN_BANK_2BIT(15, 0x070, "gph"),
> + PIN_BANK_2BIT(16, 0x0d0, "gpj"),
> + PIN_BANK_2BIT(16, 0x0e0, "gpk"),
> + PIN_BANK_2BIT(15, 0x0f0, "gpl"),
> + PIN_BANK_2BIT(2, 0x100, "gpm"),
> +};
> +
> +struct samsung_pin_ctrl s3c2450_pin_ctrl[] = {
> + {
> + .pin_banks = s3c2450_pin_banks,
> + .nr_banks = ARRAY_SIZE(s3c2450_pin_banks),
> + .eint_wkup_init = s3c24xx_eint_init,
> + .label = "S3C2450-GPIO",
> + .type = S3C24XX,
Ditto.
> + },
> +};
> diff --git a/drivers/pinctrl/pinctrl-samsung.c
> b/drivers/pinctrl/pinctrl-samsung.c index e836135..234c32f 100644
> --- a/drivers/pinctrl/pinctrl-samsung.c
> +++ b/drivers/pinctrl/pinctrl-samsung.c
> @@ -977,6 +977,16 @@ static const struct of_device_id
> samsung_pinctrl_dt_match[] = { { .compatible = "samsung,s3c64xx-pinctrl",
> .data = s3c64xx_pin_ctrl },
> #endif
> +#ifdef CONFIG_PINCTRL_S3C24XX
> + { .compatible = "samsung,s3c2413-pinctrl",
> + .data = s3c2413_pin_ctrl },
> + { .compatible = "samsung,s3c2416-pinctrl",
> + .data = s3c2416_pin_ctrl },
> + { .compatible = "samsung,s3c2440-pinctrl",
> + .data = s3c2440_pin_ctrl },
> + { .compatible = "samsung,s3c2450-pinctrl",
> + .data = s3c2450_pin_ctrl },
> +#endif
> {},
> };
> MODULE_DEVICE_TABLE(of, samsung_pinctrl_dt_match);
> diff --git a/drivers/pinctrl/pinctrl-samsung.h
> b/drivers/pinctrl/pinctrl-samsung.h index 7c7f9eb..8bd317c 100644
> --- a/drivers/pinctrl/pinctrl-samsung.h
> +++ b/drivers/pinctrl/pinctrl-samsung.h
> @@ -81,6 +81,16 @@ enum eint_type {
> EINT_TYPE_WKUP_MUX,
> };
>
> +/**
> + * enum ctrl_type - variances of a pin controller type
> + * @S3C24XX: generic s3c24xx pin handling
> + * @S3C2412: s3c2412-type eints, existing in the main and eint controllers
> + */
> +enum ctrl_type {
> + S3C24XX,
> + S3C2412,
> +};
Diito.
> +
> /* maximum length of a pin in pin descriptor (example: "gpa0-0") */
> #define PIN_NAME_LENGTH 10
>
> @@ -164,6 +174,7 @@ struct samsung_pin_bank {
> * @eint_wkup_init: platform specific callback to setup the external wakeup
> * interrupts for the controller.
> * @label: for debug information.
> + * @type: type of pin-controller
> */
> struct samsung_pin_ctrl {
> struct samsung_pin_bank *pin_banks;
> @@ -185,6 +196,7 @@ struct samsung_pin_ctrl {
> int (*eint_gpio_init)(struct samsung_pinctrl_drv_data *);
> int (*eint_wkup_init)(struct samsung_pinctrl_drv_data *);
> char *label;
> + enum ctrl_type type;
Ditto.
Best regards,
--
Tomasz Figa
Samsung Poland R&D Center
SW Solution Development, Kernel and System Framework
> };
>
> /**
> @@ -246,5 +258,9 @@ extern struct samsung_pin_ctrl exynos4210_pin_ctrl[];
> extern struct samsung_pin_ctrl exynos4x12_pin_ctrl[];
> extern struct samsung_pin_ctrl exynos5250_pin_ctrl[];
> extern struct samsung_pin_ctrl s3c64xx_pin_ctrl[];
> +extern struct samsung_pin_ctrl s3c2413_pin_ctrl[];
> +extern struct samsung_pin_ctrl s3c2416_pin_ctrl[];
> +extern struct samsung_pin_ctrl s3c2440_pin_ctrl[];
> +extern struct samsung_pin_ctrl s3c2450_pin_ctrl[];
>
> #endif /* __PINCTRL_SAMSUNG_H */
More information about the linux-arm-kernel
mailing list