[PATCH 3/4] ARM: mmp: bring up pxa988 with device tree support
Neil Zhang
zhangwm at marvell.com
Wed Apr 10 23:38:49 EDT 2013
bring up pxa988 with device tree support.
Signed-off-by: Neil Zhang <zhangwm at marvell.com>
Signed-off-by: Chao Xie <chao.xie at marvell.com>
---
arch/arm/boot/dts/pxa988-dkb.dts | 36 ++++++
arch/arm/boot/dts/pxa988.dtsi | 196 +++++++++++++++++++++++++++++
arch/arm/mach-mmp/Kconfig | 25 ++++
arch/arm/mach-mmp/Makefile | 1 +
arch/arm/mach-mmp/common.c | 11 ++-
arch/arm/mach-mmp/include/mach/addr-map.h | 6 +
arch/arm/mach-mmp/mmpx-dt.c | 79 ++++++++++++
drivers/clk/mmp/Makefile | 1 +
8 files changed, 354 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/boot/dts/pxa988-dkb.dts
create mode 100644 arch/arm/boot/dts/pxa988.dtsi
create mode 100644 arch/arm/mach-mmp/mmpx-dt.c
diff --git a/arch/arm/boot/dts/pxa988-dkb.dts b/arch/arm/boot/dts/pxa988-dkb.dts
new file mode 100644
index 0000000..2cee3ed
--- /dev/null
+++ b/arch/arm/boot/dts/pxa988-dkb.dts
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2012 Marvell Technology Group Ltd.
+ * Author: Haojian Zhuang <haojian.zhuang at marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/include/ "pxa988.dtsi"
+
+/ {
+ model = "Marvell PXA988 DKB Development Board";
+ compatible = "mrvl,pxa988-dkb", "mrvl,pxa988";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
+ };
+
+ memory {
+ reg = <0x00000000 0x10000000>;
+ };
+
+ soc {
+ apb at d4000000 {
+ uart1: uart at d4017000 {
+ status = "okay";
+ };
+
+ rtc: rtc at d4010000 {
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/pxa988.dtsi b/arch/arm/boot/dts/pxa988.dtsi
new file mode 100644
index 0000000..8ec89b0
--- /dev/null
+++ b/arch/arm/boot/dts/pxa988.dtsi
@@ -0,0 +1,196 @@
+/*
+ * Copyright (C) 2013 Marvell Technology Group Ltd.
+ * Author: Chao Xie <chao.xie at marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ i2c0 = &twsi1;
+ i2c1 = &twsi2;
+ };
+
+ cpus {
+ cpu at 0 {
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ };
+ cpu at 1 {
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ };
+ };
+
+ gic: interrupt-controller at d1dfe100 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0xd1dff000 0x1000>,
+ <0xd1dfe100 0x0100>;
+ };
+
+ L2: l2-cache-controller at d1dfb000 {
+ compatible = "arm,pl310-cache";
+ reg = <0xd1dfb000 0x1000>;
+ arm,data-latency = <2 1 1>;
+ arm,tag-latency = <2 1 1>;
+ arm,pwr-dynamic-clk-gating;
+ arm,pwr-standby-mode;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ local-timer at d1dfe600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xd1dfe600 0x20>;
+ interrupts = <1 13 0x304>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ axi at d4200000 { /* AXI */
+ compatible = "mrvl,axi-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xd4200000 0x00200000>;
+ ranges;
+
+ intc: interrupt-controller at d4282000 {
+ compatible = "mrvl,mmp-intc";
+ reg = <0xd4282000 0x1000>;
+ mrvl,intc-wakeup = <0x114 0x3
+ 0x144 0x3>;
+ };
+
+ };
+
+ apb at d4000000 { /* APB */
+ compatible = "mrvl,apb-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xd4000000 0x00200000>;
+ ranges;
+
+ timer0: timer at d4014000 {
+ compatible = "mrvl,mmp-timer";
+ reg = <0xd4014000 0x100>;
+ interrupts = <0 13 0x4>;
+ };
+
+ timer1: timer at d4016000 {
+ compatible = "mrvl,mmp-timer";
+ reg = <0xd4016000 0x100>;
+ interrupts = <0 29 0x4>;
+ status = "disabled";
+ };
+
+ uart1: uart at d4017000 {
+ compatible = "mrvl,mmp-uart";
+ reg = <0xd4017000 0x1000>;
+ interrupts = <0 27 0x4>;
+ status = "disabled";
+ };
+
+ uart2: uart at d4018000 {
+ compatible = "mrvl,mmp-uart";
+ reg = <0xd4018000 0x1000>;
+ interrupts = <0 28 0x4>;
+ status = "disabled";
+ };
+
+ uart3: uart at d4036000 {
+ compatible = "mrvl,mmp-uart";
+ reg = <0xd4036000 0x1000>;
+ interrupts = <0 59 0x4>;
+ status = "disabled";
+ };
+
+ gpio at d4019000 {
+ compatible = "mrvl,mmp-gpio";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xd4019000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <49>;
+ interrupt-names = "gpio_mux";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ ranges;
+
+ gcb0: gpio at d4019000 {
+ reg = <0xd4019000 0x4>;
+ };
+
+ gcb1: gpio at d4019004 {
+ reg = <0xd4019004 0x4>;
+ };
+
+ gcb2: gpio at d4019008 {
+ reg = <0xd4019008 0x4>;
+ };
+
+ gcb3: gpio at d4019100 {
+ reg = <0xd4019100 0x4>;
+ };
+ };
+
+ twsi1: i2c at d4011000 {
+ compatible = "mrvl,mmp-twsi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xd4011000 0x1000>;
+ interrupts = <0 7 0x4>;
+ mrvl,i2c-fast-mode;
+ status = "disabled";
+ };
+
+ twsi2: i2c at d4037000 {
+ compatible = "mrvl,mmp-twsi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xd4037000 0x1000>;
+ interrupts = <0 54 0x4>;
+ status = "disabled";
+ };
+
+ rtc: rtc at d4010000 {
+ compatible = "mrvl,mmp-rtc";
+ reg = <0xd4010000 0x1000>;
+ interrupts = <0 5 0x4>,<0 6 0x4>;
+ interrupt-names = "rtc 1Hz", "rtc alarm";
+ status = "disabled";
+ };
+ pmx: pinmux at d401e000 {
+ compatible = "pinconf-single";
+ reg = <0xd401e000 0x330>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #gpio-range-cells = <3>;
+ ranges;
+
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <7>;
+
+ range: gpio-range {
+ #pinctrl-single,gpio-range-cells = <3>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index ebdda83..ffdbab9 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -107,6 +107,16 @@ config MACH_MMP2_DT
Include support for Marvell MMP2 based platforms using
the device tree.
+config MACH_MMPX_DT
+ bool "Support no-PJ/PJ4(ARMv7) platforms from device tree"
+ depends on !CPU_MOHAWK && !CPU_PJ4
+ select CPU_PXA988
+ select USE_OF
+ select PINCTRL
+ select PINCTRL_SINGLE
+ help
+ Include support for Marvell MMP2 based platforms using
+ the device tree.
endmenu
config CPU_PXA168
@@ -123,6 +133,21 @@ config CPU_PXA910
help
Select code specific to PXA910
+config CPU_PXA988
+ bool
+ select CPU_V7
+ select ARM_GIC
+ select HAVE_SMP
+ select SOC_LOCAL_TIMERS
+ select COMMON_CLK
+ select CLKSRC_OF
+ select MIGHT_HAVE_CACHE_L2X0
+ help
+ Say 'Y' here if you want to support the Marvell pxa988-base
+ platforms.
+ PXA988 is an SoC with dual-core Cotex-A9 and comunication
+ processor, code name "Emei".
+
config CPU_MMP2
bool
select COMMON_CLK
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 095c155..b60065f 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -31,5 +31,6 @@ obj-$(CONFIG_MACH_FLINT) += flint.o
obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
obj-$(CONFIG_MACH_MMP_DT) += mmp-dt.o
obj-$(CONFIG_MACH_MMP2_DT) += mmp2-dt.o
+obj-$(CONFIG_MACH_MMPX_DT) += mmpx-dt.o
obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o
obj-$(CONFIG_MACH_GPLUGD) += gplugd.o
diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c
index 9292b79..0c621bc 100644
--- a/arch/arm/mach-mmp/common.c
+++ b/arch/arm/mach-mmp/common.c
@@ -11,6 +11,10 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/of_address.h>
#include <asm/page.h>
#include <asm/mach/map.h>
@@ -36,7 +40,12 @@ static struct map_desc standard_io_desc[] __initdata = {
.virtual = (unsigned long)AXI_VIRT_BASE,
.length = AXI_PHYS_SIZE,
.type = MT_DEVICE,
- },
+ }, {
+ .pfn = __phys_to_pfn(MMP_CORE_PERIPH_PHYS_BASE),
+ .virtual = (unsigned long)MMP_CORE_PERIPH_VIRT_BASE,
+ .length = MMP_CORE_PERIPH_PHYS_SIZE,
+ .type = MT_DEVICE,
+ }
};
void __init mmp_map_io(void)
diff --git a/arch/arm/mach-mmp/include/mach/addr-map.h b/arch/arm/mach-mmp/include/mach/addr-map.h
index f88a44c..092005b 100644
--- a/arch/arm/mach-mmp/include/mach/addr-map.h
+++ b/arch/arm/mach-mmp/include/mach/addr-map.h
@@ -25,6 +25,10 @@
#define AXI_VIRT_BASE IOMEM(0xfe200000)
#define AXI_PHYS_SIZE 0x00200000
+#define MMP_CORE_PERIPH_PHYS_BASE 0xd1dfe000
+#define MMP_CORE_PERIPH_VIRT_BASE IOMEM(0xfe400000)
+#define MMP_CORE_PERIPH_PHYS_SIZE 0x00002000
+
/* Static Memory Controller - Chip Select 0 and 1 */
#define SMC_CS0_PHYS_BASE 0x80000000
#define SMC_CS0_PHYS_SIZE 0x10000000
@@ -43,4 +47,6 @@
#define CIU_VIRT_BASE (AXI_VIRT_BASE + 0x82c00)
#define CIU_REG(x) (CIU_VIRT_BASE + (x))
+#define SCU_VIRT_BASE (MMP_CORE_PERIPH_VIRT_BASE)
+
#endif /* __ASM_MACH_ADDR_MAP_H */
diff --git a/arch/arm/mach-mmp/mmpx-dt.c b/arch/arm/mach-mmp/mmpx-dt.c
new file mode 100644
index 0000000..bbc0c50
--- /dev/null
+++ b/arch/arm/mach-mmp/mmpx-dt.c
@@ -0,0 +1,79 @@
+/*
+ * linux/arch/arm/mach-mmp/mmpx-dt.c
+ *
+ * Copyright (C) 2012 Marvell Technology Group Ltd.
+ * Author: Haojian Zhuang <haojian.zhuang at marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/clocksource.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/smp_twd.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/irqs.h>
+#include <mach/regs-apbc.h>
+
+#include "common.h"
+
+/* PXA988 */
+static const struct of_dev_auxdata pxa988_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL),
+ OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL),
+ OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4036000, "pxa2xx-uart.2", NULL),
+ OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL),
+ OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4037000, "pxa2xx-i2c.1", NULL),
+ OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL),
+ OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
+ {}
+};
+
+static void __init pxa988_dt_gic_init(void)
+{
+ irqchip_init();
+ /* only for wake up */
+ mmp_dt_irq_init();
+}
+
+void __init pxa988_dt_init_timer(void)
+{
+ /*
+ * Is is a SOC timer, and will be used for broadcasting
+ * when local timers are disabled.
+ */
+ mmp_dt_init_timer();
+
+ clocksource_of_init();
+}
+
+static void __init pxa988_dt_init(void)
+{
+ l2x0_of_init(0x30800000, 0xFE7FFFFF);
+
+ pxa910_clk_init();
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ pxa988_auxdata_lookup, NULL);
+}
+
+static const char *pxa988_dt_board_compat[] __initdata = {
+ "mrvl,pxa988-dkb",
+ NULL,
+};
+
+DT_MACHINE_START(PXA988_DT, "Marvell PXA988 (Device Tree Support)")
+ .map_io = mmp_map_io,
+ .init_irq = pxa988_dt_gic_init,
+ .init_time = pxa988_dt_init_timer,
+ .init_machine = pxa988_dt_init,
+ .dt_compat = pxa988_dt_board_compat,
+MACHINE_END
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index 392d780..59a3f9f7 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -7,3 +7,4 @@ obj-y += clk-apbc.o clk-apmu.o clk-frac.o
obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
obj-$(CONFIG_CPU_MMP2) += clk-mmp2.o
+obj-$(CONFIG_CPU_PXA988) += clk-pxa910.o
--
1.7.4.1
More information about the linux-arm-kernel
mailing list