[PATCHv8 00/19] PCIe support for the Armada 370 and Armada XP SoCs
Thomas Petazzoni
thomas.petazzoni at free-electrons.com
Tue Apr 9 17:06:21 EDT 2013
Hello,
This series of patches introduces PCIe support for the Marvell Armada
370 and Armada XP. In the future, we plan to extend the driver to
cover Kirkwood platforms, and possibly other Marvell EBU platforms as
well.
Here is the current status of the different patches:
* Patches 1-5 are awaiting a formal Acked-by from the Device Tree
maintainers. Patches 1-3 are the new version of the OF PCI range
parsing functions from Andrew Murray, which he worked on after the
comments from Rob Herring. Patches 4 and 5 are much more trivial
and have been around since many versions of this series.
* Patch 6 and 10, that are touching drivers/pci/ have been formally
Acked-by Bjorn Helgaas, the PCI maintainer.
* Patch 7, which is touching arch/arm/kernel, has been merged by
Russell King already, see
http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7683/1.
* Patches 8 and 9 are touching drivers/clk, and are awaiting an
Acked-by from Mike Turquette. However, they are fairly trivial
patches, so they shouldn't cause too much problem.
* All the other patches touch mvebu-specific things, either
mach-mvebu or the related Device Tree files or defconfig, so it's
up to the Marvell maintainers to pick them up.
This patch set depends on:
* The arm-soc/mvebu/cleanup branch in Arnd and Olof arm-soc tree
* [PATCH v3 for 3.10] Introduce a Marvell EBU MBus driver
http://lists.infradead.org/pipermail/linux-arm-kernel/2013-March/156883.html
For easier testing, the code has been pushed to:
git://github.com/MISL-EBU-System-SW/mainline-public.git marvell-pcie-v8
This PATCHv8 follows:
* PATCHv7, sent on March, 27th 2013
* PATCHv6, sent on March, 26st 2013
* PATCHv5, sent on March, 21st 2013
* PATCHv4, sent on March, 8th 2013
* PATCHv3, sent on February, 12th 2013
* PATCHv2, sent on January, 28th 2013
* RFCv1, sent on December, 7th 2012
Changes between v7 and v8:
* In the patch introducing the drivers/pci/host directory, add an
empty drivers/pci/host/Makefile to ensure that the kernel still
build. This Makefile will actually gets its first useful line when
the Marvell PCIe driver gets added. Noted by Neil Greatorex.
* Remove bogus (and useless) CFLAGS in drivers/pci/host/Makefile for
the compilation of the Marvell PCIe driver. Noticed by Bjorn
Helgaas.
* Added missing parenthesis in the definition of the
PCIE_BAR_CTRL_OFF macro. Noticed by Bjorn Helgaas.
* Make mvebu_pcie_link_up() return 'bool' instead of 'int'. Suggested
by Bjorn Helgaas.
* Change mvebu_pcie_link_up(), mvebu_pcie_set_local_bus_nr(),
mvebu_pcie_setup_wins(), mvebu_pcie_setup_hw(),
mvebu_pcie_hw_rd_conf(), mvebu_pcie_hw_wr_conf() so that they take
a 'struct mvebu_pcie_port *' instead of a 'void __iomem *' as first
argument. The base address of the PCIe interface register are
available using the 'base' field of 'struct
mvebu_pcie_port'. Suggested by Bjorn Helgaas.
* Fixed multi-line comments that should have been one line
comments. Noticed by Bjorn Helgaas.
* Fixed a for() loop in mvebu_pcie_setup_wins() to use the more
conventional 'ii < 3' ending condition instead of 'i <=
2'. Suggested by Bjorn Helgaas.
* Add a #define instead of an hardcoded magic value when enabling
interrupts A-D in mvebu_pcie_setup_hw(). Suggested by Bjorn
Helgaas.
* Add a PCIE_CONF_ADDR() to simplify the code in
mvebu_pcie_hw_rd_conf() and mvebu_pcie_hw_wr_conf(). Suggested by
Bjorn Helgaas.
* Clarify the comments in mvebu_pcie_handle_iobase_change() and
mvebu_pcie_handle_membase_change() so that it is clear we look at
the new iobase/iolimit (respectively membase/memlimit)
values. Suggested by Bjorn Helgaas.
* Replace mvebu_pcie_find_port_by_bus() and
mvebu_pcie_find_port_by_devfn() by a single mvebu_pcie_find_port()
function, and simplify the mvebu_pcie_rd_conf() and
mvebu_pcie_wr_conf() functions. Suggested by Bjorn Helgaas.
* Fix the computation of the real I/O resource start and end
addresses, according to the suggestions of Arnd Bergmann and Jason
Gunthorpe.
* Remove the MASK/OFFS definition, and use definitions more in the
style of pci_regs.h. Suggested by Bjorn Helgaas.
* Integrate the latest version of 'of/pci: Provide support for
parsing PCI DT ranges property' from Andrew Murray, fixed according
to the review of Rob Herring.
* Added the Acked-by tags from Bjorn Helgaas on the PCI patches.
Changes between v6 and v7:
* Use assigned-addresses in the DT subnodes for the MMIO PCIe
registers, in order to align with what Thierry is doing on the
Tegra PCIe driver.
* Added empty 'ranges;' properties in the subnodes, as requested by
Arnd. Note that due to this, it is not possible to remove the
#address-cells and #size-cells properties from the subnodes, as
Jason Gunthorpe requested, otherwise the DT compiler complains with:
Warning (ranges_format): /soc/pcie-controller/pcie at 1,0 has empty
"ranges" property but its #address-cells (2) differs from
/soc/pcie-controller (3)
Warning (ranges_format): /soc/pcie-controller/pcie at 1,0 has empty
"ranges" property but its #size-cells (1) differs from
/soc/pcie-controller (2)
* Use the new RFCv3 patch from Andrew Murray for 'of/pci: Provide
support for parsing PCI DT ranges property'.
* Updated the DT binding documentation accordingly.
Changes between v5 and v6:
* Use pci_create_root_bus() + pci_scan_child_bus() instead of
pci_scan_root_bus(). This is needed to be able to add MSI support
later on. Moreover Thierry Reding suggested that
pci_scan_root_bus() "does a pci_bus_add_devices(), which is called
again in pci_common_init() in the ARM code". Thanks Thierry for
pointing out this issue.
Changes between v4 and v5:
* Rebased on top of 3.9-rc2 + the new mvebu-mbus driver (v3).
* Changed the names of the PCI DT sub-nodes to match the OF
specifications: they should be named pcie at DD,FF where DD is the
device number and FF the function number. Requested by Mitch
Bradley.
* Add the device_type = "pci" property at the pcie-controller
level. Requested by Mitch Bradley.
* Drop patch 'of/pci: Add of_pci_get_bus() function' because it
wasn't actually used in the rest of the patch series.
* Updated the patch 'of/pci: Provide support for parsing PCI DT
ranges property' to use the latest version proposed by Andrew
Murray on the devicetree-discuss@ mailing list.
Changes between v3 and v4:
* Rebased on top of 3.9-rc1.
* Drop patch "ARM: pci: Allow passing per-controller private data"
because it was merged in 3.9.
* Drop patch "lib: devres: don't enclose pcim_*() functions in
CONFIG_HAS_IOPORT", because it was merged in 3.9.
* Added CONFIG_PCI_MVEBU=y in mvebu_defconfig, so that the right PCI
host controller driver is automatically enabled.
* Instead of using the DT 'ranges' property to encode the PCIe
register ranges, use a 'reg' property on the main PCIe controller
DT node together with a 'reg-names' property. Suggested by Jason
Gunthorpe.
* Don't select PCI_SW_HOST_BRIDGE and PCI_SW_PCI_PCI_BRIDGE, they
don't exist anymore. Reported by Bjorn Helgaas.
* Added support for the Armada XP GP board.
* Fix the 'ranges' property so that the memory range is an identity
map between CPU addresses and bus addresses. Suggested by Arnd
Bergmann.
* Changed the 'ranges' property to have the I/O region after the
memory region.
* Use the new mvebu-mbus driver API to create/remove address decoding
windows when needed. This remove the need to include
<mach/addr-map.h>. Requested by Arnd Bergmann.
* Include directly into the driver the few common PCIe functions we
were using from arch/arm/plat-orion/pcie.c. This allows to remove
the inclusion of <plat/pcie.h>. Requested by Arnd Bergmann.
* Directly set up the address decoding windows when the memory
base/limit and I/O base/limit are configured in the PCI-to-PCI
bridge instead of relying on the memory and I/O accesses being
enabled in the PCI_COMMAND register. Suggested by Bjorn Helgaas.
* Added some comments on top of the calculations of the I/O
base/limit and memory base/limit. Suggested by Arnd Bergmann.
* Changed a bit the way the "realio" resource is created, from
suggestions given by Arnd Bergmann.
* Updated the Device Tree binding documentation. Reported by Jason
Gunthorpe.
* Instead of using "marvell,armada-370-xp-pcie" as the DT compatible
string, use two separate compatible strings:
"marvell,armada-370-pcie" and "marvell,armada-xp-pcie". For now,
the driver does the same thing for both.
Changes between v2 and v3:
* Use of_irq_map_pci() instead of of_irq_map_raw(), as suggested by
Andrew Murray. In order to do this, we moved the interrupt-map and
interrupt-map-mask DT properties from the main PCIe controller node
to the DT subnodes representing each PCIe interface.
* Remove the usage of the emulated host bridge.
* Move the emulated PCI-to-PCI bridge code into the Marvell PCI
driver itself, in order to allow a tighter integration. Suggested
by Bjorn Helgaas and Jason Gunthorpe.
* Make the allocation of address decoding windows dynamic: it's when
memory accesses or I/O accesses are enabled at the PCI-to-PCI
bridge level that we allocate and setup the corresponding address
decoding window. Requested by Bjorn Helgaas.
* Fixed the implementation of I/O accesses to use I/O addresses that
fall within the normal IO_SPACE_LIMIT. This required using the
"remap" functionality of address decoding windows, and therefore
some changes in the address decoding window allocator. Follows a
long discussion about I/O accesses.
* Set up a correct bus number in the configuration of the PCIe
interfaces so that we don't have to fake bus numbers
anymore. Requested by Jason Gunthorpe.
* Fix the of_pci_get_devfn() implementation according to Stephen
Warren's comment.
* Use CFLAGS_ instead of ccflags to add the mach-mvebu and plat-orion
include paths when building the pci-mvebu driver. This ensures that
the include paths are only added when building this specific
driver. Requested by Stephen Warren.
* Fix the ->resource_align() to only apply on bus 0 (the one on which
the emulated PCI-to-PCI bridges sit), and to request an alignment
on the size of the window (and not only 64 KB for I/O windows and 1
MB for memory windows).
* Clarified the commit log of "clk: mvebu: create parent-child
relation for PCIe clocks on Armada 370"
Thanks,
Thomas
Andrew Murray (3):
of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and
PowerPC
of/pci: Provide support for parsing PCI DT ranges property
of/pci: mips: convert to common of_pci_range_parser
Thierry Reding (2):
of/pci: Add of_pci_get_devfn() function
of/pci: Add of_pci_parse_bus_range() function
Thomas Petazzoni (14):
pci: infrastructure to add drivers in drivers/pci/host
arm: pci: add a align_resource hook
clk: mvebu: create parent-child relation for PCIe clocks on Armada
370
clk: mvebu: add more PCIe clocks for Armada XP
pci: PCIe driver for Marvell Armada 370/XP systems
arm: mvebu: PCIe support is now available on mvebu
arm: mvebu: add PCIe Device Tree informations for Armada 370
arm: mvebu: add PCIe Device Tree informations for Armada XP
arm: mvebu: PCIe Device Tree informations for OpenBlocks AX3-4
arm: mvebu: PCIe Device Tree informations for Armada XP DB
arm: mvebu: PCIe Device Tree informations for Armada 370 Mirabox
arm: mvebu: PCIe Device Tree informations for Armada 370 DB
arm: mvebu: PCIe Device Tree informations for Armada XP GP
arm: mvebu: update defconfig with PCI and USB support
.../devicetree/bindings/pci/mvebu-pci.txt | 220 +++++
arch/arm/boot/dts/armada-370-db.dts | 17 +
arch/arm/boot/dts/armada-370-mirabox.dts | 16 +
arch/arm/boot/dts/armada-370.dtsi | 51 ++
arch/arm/boot/dts/armada-xp-db.dts | 33 +
arch/arm/boot/dts/armada-xp-gp.dts | 21 +
arch/arm/boot/dts/armada-xp-mv78230.dtsi | 104 +++
arch/arm/boot/dts/armada-xp-mv78260.dtsi | 122 +++
arch/arm/boot/dts/armada-xp-mv78460.dtsi | 188 +++++
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 9 +
arch/arm/configs/mvebu_defconfig | 3 +
arch/arm/include/asm/mach/pci.h | 11 +
arch/arm/kernel/bios32.c | 6 +
arch/arm/mach-mvebu/Kconfig | 2 +
arch/microblaze/include/asm/pci-bridge.h | 5 +-
arch/microblaze/pci/pci-common.c | 192 -----
arch/mips/pci/pci.c | 50 +-
arch/powerpc/include/asm/pci-bridge.h | 5 +-
arch/powerpc/kernel/pci-common.c | 192 -----
drivers/clk/mvebu/clk-gating-ctrl.c | 18 +-
drivers/of/address.c | 63 ++
drivers/of/of_pci.c | 227 ++++-
drivers/pci/Kconfig | 2 +
drivers/pci/Makefile | 3 +
drivers/pci/host/Kconfig | 8 +
drivers/pci/host/Makefile | 1 +
drivers/pci/host/pci-mvebu.c | 879 ++++++++++++++++++++
include/linux/of_address.h | 42 +
include/linux/of_pci.h | 6 +
29 files changed, 2059 insertions(+), 437 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/mvebu-pci.txt
create mode 100644 drivers/pci/host/Kconfig
create mode 100644 drivers/pci/host/Makefile
create mode 100644 drivers/pci/host/pci-mvebu.c
--
1.7.9.5
More information about the linux-arm-kernel
mailing list