[RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
Nishanth Menon
nm at ti.com
Tue Apr 9 16:49:00 EDT 2013
On 10:43-20130409, Tony Lindgren wrote:
> * Tony Lindgren <tony at atomide.com> [130409 09:54]:
> > * Roger Quadros <rogerq at ti.com> [130409 03:00]:
> > > On 04/05/2013 06:58 PM, Tony Lindgren wrote:
> > > >
> > > > Can't you just use the clock name there to get it?
> > >
> > > In device tree we don't pass around clock names. You can either get
> > > a phandle or an index to the clock.
> > >
> > > e.g. Documentation/devicetree/bindings/clock/imx31-clock.txt
> >
> > Yes I understand that. But the driver/clock/omap driver can just
> > remap the DT device initially so the board specific clock is
> > found from the clock alias table. Basically initially a passthrough
> > driver that can be enhanced to parse DT clock bindings and load
> > data from /lib/firmware.
>
> Actually probably the driver/clock/omap can even do even less
> initially. There probably even no need to remap clocks there.
>
> As long as the DT clock driver understands that a board specific
> auxclk is specified in the DT it can just call clk_add_alias() so
> the driver will get the right auxclk from cclock44xx_data.c.
>
> Then other features can be added later on like to allocate a
> clock entirely based on the binding etc.
I did try to have an implementation for cpufreq using clock nodes.
unfortunately, device tree wont let me have arguments of strings :(
So, I am unable to do clock = <&clk mpu_dpll>;
instead, I am forced to do clock = <&clk 249>;
Here is an attempt on beagleXM - adds every clock node to the list.
Tons of un-necessary prints added to give an idea - see log:
http://pastebin.com/F9A2zSTr
Would an cleaned up version be good enough as a step #1 of transition?
>From 7d373bdb9e9549c1b6ba1775a8dfd96ebe78abfb Mon Sep 17 00:00:00 2001
From: Nishanth Menon <nm at ti.com>
Date: Tue, 26 Mar 2013 10:23:27 +0000
Subject: [PATCH] OMAP: add devicetree support for clock nodes.
Dummy patch based on Roger's original idea
Nyet-Signed-off-by: Nishanth Menon <nm at ti.com>
---
arch/arm/boot/dts/omap3.dtsi | 5 ++
arch/arm/boot/dts/omap34xx.dtsi | 2 +
arch/arm/mach-omap2/cclock3xxx_data.c | 3 +-
arch/arm/mach-omap2/cclock44xx_data.c | 3 +-
arch/arm/mach-omap2/pm.c | 11 +++-
drivers/clk/Kconfig | 6 ++
drivers/clk/Makefile | 2 +
drivers/clk/ti.c | 100 +++++++++++++++++++++++++++++++++
include/linux/clk/ti.h | 30 ++++++++++
9 files changed, 157 insertions(+), 5 deletions(-)
create mode 100644 drivers/clk/ti.c
create mode 100644 include/linux/clk/ti.h
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 3344f05..a08990d 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -73,6 +73,11 @@
ti,hwmods = "counter_32k";
};
+ clks: clocks {
+ compatible = "ti,clock";
+ #clock-cells = <1>;
+ };
+
intc: interrupt-controller at 48200000 {
compatible = "ti,omap2-intc";
interrupt-controller;
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index 75ed4ae..93c2621 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -23,6 +23,8 @@
600000 1350000
>;
clock-latency = <300000>; /* From legacy driver */
+ clocks = <&clks 249>; /* index to cpufreq_ck */
+ clock-names = "cpu";
};
};
};
diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c
index 4579c3c..d5d5ef5 100644
--- a/arch/arm/mach-omap2/cclock3xxx_data.c
+++ b/arch/arm/mach-omap2/cclock3xxx_data.c
@@ -22,6 +22,7 @@
#include <linux/clk-private.h>
#include <linux/list.h>
#include <linux/io.h>
+#include <linux/clk/ti.h>
#include "soc.h"
#include "iomap.h"
@@ -3574,7 +3575,7 @@ int __init omap3xxx_clk_init(void)
for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks);
c++)
if (c->cpu & cpu_clkflg) {
- clkdev_add(&c->lk);
+ ti_clk_node_add(&c->lk);
if (!__clk_init(NULL, c->lk.clk))
omap2_init_clk_hw_omap_clocks(c->lk.clk);
}
diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c
index 0c6834a..338ef64 100644
--- a/arch/arm/mach-omap2/cclock44xx_data.c
+++ b/arch/arm/mach-omap2/cclock44xx_data.c
@@ -27,6 +27,7 @@
#include <linux/clk-private.h>
#include <linux/clkdev.h>
#include <linux/io.h>
+#include <linux/clk/ti.h>
#include "soc.h"
#include "iomap.h"
@@ -1697,7 +1698,7 @@ int __init omap4xxx_clk_init(void)
for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks);
c++) {
if (c->cpu & cpu_clkflg) {
- clkdev_add(&c->lk);
+ ti_clk_node_add(&c->lk);
if (!__clk_init(NULL, c->lk.clk))
omap2_init_clk_hw_omap_clocks(c->lk.clk);
}
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 8d15f9a..6cf95160 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -267,7 +267,12 @@ static void __init omap4_init_voltages(void)
static inline void omap_init_cpufreq(void)
{
- struct platform_device_info devinfo = { .name = "omap-cpufreq", };
+ struct platform_device_info devinfo = { };
+
+ if (!of_have_populated_dt())
+ devinfo.name = "omap-cpufreq";
+ else
+ devinfo.name = "cpufreq-cpu0";
platform_device_register_full(&devinfo);
}
@@ -301,9 +306,9 @@ int __init omap2_common_pm_late_init(void)
/* Smartreflex device init */
omap_devinit_smartreflex();
- /* cpufreq dummy device instantiation */
- omap_init_cpufreq();
}
+ /* cpufreq dummy device instantiation */
+ omap_init_cpufreq();
#ifdef CONFIG_SUSPEND
suspend_set_ops(&omap_pm_ops);
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index a47e6ee..03c6e48 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -55,6 +55,12 @@ config COMMON_CLK_MAX77686
---help---
This driver supports Maxim 77686 crystal oscillator clock.
+config COMMON_CLK_TI
+ tristate "Clock driver for TI SoCs"
+ depends on ARCH_OMAP && OF
+ ---help---
+ Fill me up.. some generic statement ofcourse (lets start with OMAP)
+
config CLK_TWL6040
tristate "External McPDM functional clock from twl6040"
depends on TWL6040_CORE
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 300d477..9621815 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -30,6 +30,8 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra/
obj-$(CONFIG_X86) += x86/
+obj-$(CONFIG_COMMON_CLK_TI) += ti.o
+
# Chip specific
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
diff --git a/drivers/clk/ti.c b/drivers/clk/ti.c
new file mode 100644
index 0000000..c747381
--- /dev/null
+++ b/drivers/clk/ti.c
@@ -0,0 +1,100 @@
+/*
+ * TI Clock node provider
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Nishanth Menon
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk-private.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/clk/ti.h>
+
+struct ti_clk {
+ struct clk_lookup *lk;
+ struct list_head node;
+};
+
+static LIST_HEAD(ti_clk_list);
+
+static struct clk *ti_bypass_clk_get_by_name(struct of_phandle_args *clkspec,
+ void *data)
+{
+ struct ti_clk *c;
+#if 0
+ /* Eww.. IF ONLY phandle arguments could be string */
+ char clk_name[32]; /* 32 is max size of property name */
+
+ char *name = clkspec->args[0];
+
+ snprintf(clk_name, 32, "%s_ck", name);
+ list_for_each_entry(c, &ti_clk_list, node) {
+ int r = strncmp(c->lk->conn_id, clk_name, 32);
+ pr_err("%s: searching %s in %s - %d\n",
+ __func__, clk_name, c->lk->con_id, r);
+ if (!r) {
+ pr_err("%s: found it!\n", __func__);
+ return c->lk.clk;
+ }
+ }
+#else
+ /* Use integer indexing into clkdev list! Sigh.. */
+ int idx = clkspec->args[0];
+ int cindex = 1;
+
+ list_for_each_entry(c, &ti_clk_list, node) {
+ int r = (idx == cindex) ? 0 : 1;
+ pr_err("%s: searching index search = %d in %d in %s - %d\n",
+ __func__, idx, cindex, c->lk->con_id, r);
+ if (!r) {
+ pr_err("%s: found it!\n", __func__);
+ return c->lk->clk;
+ }
+ cindex++;
+ }
+#endif
+
+ pr_err("%s: ran out of options\n", __func__);
+ return ERR_PTR(-ENODEV);
+}
+
+static void __init ti_clock_init(struct device_node *node)
+{
+
+ pr_err("%s: START\n", __func__);
+ of_clk_add_provider(node, ti_bypass_clk_get_by_name, NULL);
+ pr_err("%s: END\n", __func__);
+}
+CLK_OF_DECLARE(ti_clk, "ti,clock", ti_clock_init);
+
+void __init ti_clk_node_add(struct clk_lookup *lk)
+{
+ struct ti_clk *c;
+ static bool of_added;
+
+ c = kzalloc(sizeof(struct ti_clk), GFP_KERNEL);
+ if (!c) {
+ pr_err("%s: No memory!! cannot add clk node!\n", __func__);
+ return;
+ }
+ clkdev_add(lk);
+ c->lk = lk;
+ list_add_tail(&c->node, &ti_clk_list);
+ pr_err("%s: Added clock node %s\n", __func__, lk->con_id);
+ if (!of_added) {
+ of_clk_init(NULL);
+ of_added = true;
+ }
+};
+
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
new file mode 100644
index 0000000..eb502a8
--- /dev/null
+++ b/include/linux/clk/ti.h
@@ -0,0 +1,30 @@
+/*
+ * TI Clock node provider header
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Nishanth Menon
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __TI_CLK_H
+#define __TI_CLK_H
+
+#include <linux/clkdev.h>
+
+#ifdef CONFIG_OF
+extern void ti_clk_node_add(struct clk_lookup *lk);
+#else
+static inline void ti_clk_node_add(struct clk_lookup *lk)
+{
+ clkdev_add(lk);
+}
+#endif /* CONFIG_OF */
+
+#endif /* __TI_CLK_H */
--
1.7.9.5
--
Regards,
Nishanth Menon
More information about the linux-arm-kernel
mailing list