[PATCH v4 15/15] ARM: vexpress: Select multi-cluster SMP operation if required
Nicolas Pitre
nicolas.pitre at linaro.org
Tue Apr 9 01:41:13 EDT 2013
On Mon, 8 Apr 2013, Jon Medhurst (Tixy) wrote:
> On Sat, 2013-04-06 at 10:02 -0400, Nicolas Pitre wrote:
> > I've amended this patch slightly so to:
> >
> > 1) Keep the default .smp = &vexpress_smp_ops and only perform an
> > override in vexpress_smp_init_ops() when appropriate. This should
> > remove one potential issue with Xen support that was highlighted
> > recently.
> >
> > 2) Add a mcpm_smp_set_ops() instead of installing mcpm_smp_ops directly
> > for better abstraction.
> >
> > 3) Added a comment about and checked for the CCI node being enabled.
> >
> > That results in the patch below. Given those are minor changes, I kept
> > the existing review tags.
> >
> > From: Jon Medhurst <tixy at linaro.org>
> > Date: Wed, 30 Jan 2013 09:12:55 +0000
> > Subject: [PATCH] ARM: vexpress: Select multi-cluster SMP operation if required
> >
> > Signed-off-by: Jon Medhurst <tixy at linaro.org>
> > Signed-off-by: Nicolas Pitre <nicolas.pitre at linaro.org>
> > Reviewed-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
> > Acked-by: Pawel Moll <pawel.moll at arm.com>
> >
> > diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c
> > index 34f236af09..cc82040877 100644
> > --- a/arch/arm/common/mcpm_platsmp.c
> > +++ b/arch/arm/common/mcpm_platsmp.c
> > @@ -85,3 +85,8 @@ struct smp_operations __initdata mcpm_smp_ops = {
> > .cpu_die = mcpm_cpu_die,
> > #endif
> > };
> > +
> > +void __init mcpm_smp_set_ops(void)
> > +{
> > + smp_set_ops(&mcpm_smp_ops);
> > +}
> > diff --git a/arch/arm/include/asm/mcpm_entry.h b/arch/arm/include/asm/mcpm_entry.h
> > index 814623e6a1..34dfb86ff5 100644
> > --- a/arch/arm/include/asm/mcpm_entry.h
> > +++ b/arch/arm/include/asm/mcpm_entry.h
> > @@ -190,5 +190,7 @@ int __mcpm_cluster_state(unsigned int cluster);
> > int __init mcpm_sync_init(
> > void (*power_up_setup)(unsigned int affinity_level));
> >
> > +void __init mcpm_smp_set_ops(void);
> > +
> > #endif /* ! __ASSEMBLY__ */
> > #endif
>
>
> Do the changes to the above mcpm files want to be in a separate patch as
> it's generic ARM code, not vexpress specific?
Well, since it was so trivial I didn't do it, but the split might be a
good idea nevertheless. So I inserted the following patch in the
series, and corresponding changes are now removed from the patch above.
What do you think?
Author: Nicolas Pitre <nicolas.pitre at linaro.org>
Date: Tue Apr 9 01:29:17 2013 -0400
ARM: mcpm: provide an interface to set the SMP ops at run time
This is cleaner than exporting the mcpm_smp_ops structure.
Signed-off-by: Nicolas Pitre <nico at linaro.org>
diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c
index 34f236af09..79ed70d846 100644
--- a/arch/arm/common/mcpm_platsmp.c
+++ b/arch/arm/common/mcpm_platsmp.c
@@ -76,7 +76,7 @@ static void mcpm_cpu_die(unsigned int cpu)
#endif
-struct smp_operations __initdata mcpm_smp_ops = {
+static struct smp_operations __initdata mcpm_smp_ops = {
.smp_init_cpus = simple_smp_init_cpus,
.smp_boot_secondary = mcpm_boot_secondary,
.smp_secondary_init = mcpm_secondary_init,
@@ -85,3 +85,8 @@ struct smp_operations __initdata mcpm_smp_ops = {
.cpu_die = mcpm_cpu_die,
#endif
};
+
+void __init mcpm_smp_set_ops(void)
+{
+ smp_set_ops(&mcpm_smp_ops);
+}
diff --git a/arch/arm/include/asm/mcpm_entry.h b/arch/arm/include/asm/mcpm_entry.h
index 814623e6a1..34dfb86ff5 100644
--- a/arch/arm/include/asm/mcpm_entry.h
+++ b/arch/arm/include/asm/mcpm_entry.h
@@ -190,5 +190,7 @@ int __mcpm_cluster_state(unsigned int cluster);
int __init mcpm_sync_init(
void (*power_up_setup)(unsigned int affinity_level));
+void __init mcpm_smp_set_ops(void);
+
#endif /* ! __ASSEMBLY__ */
#endif
More information about the linux-arm-kernel
mailing list