[PATCH 1/3] ARM: mx28: add auart2 2 pins pinmux to imx28.dtsi

[Eric Bénard]

Add auart2 2 pins configuration on its main pads

Signed-off-by: Eric Bénard <eric at eukrea.com>
---
 arch/arm/boot/dts/imx28.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 7ba4966..13799cf 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -308,6 +308,17 @@
 					fsl,pull-up = <0>;
 				};
 
+				auart2_2pins_b: auart2-2pins at 1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						0x3080 /* MX28_PAD_AUART2_RX__AUART2_RX */
+						0x3090 /* MX28_PAD_AUART2_TX__AUART2_TX */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				auart3_pins_a: auart3 at 0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-- 
1.7.11.7