[PATCH 0/5] gpio/omap: 2nd batch of updates for v3.10

[Santosh Shilimkar]

On Friday 05 April 2013 01:46 AM, Jon Hunter wrote:
> Main change is ensuring that the state of a gpio bank is restored when
> booting with device-tree. The rest of the patches are clean-ups and one
> optimisation.
> 
> The patch modifying the *.dtsi files should go via Benoit Cousson's
> for_3.10/dts branch [1] as it is dependent on changes in his branch but
> I have included here for completeness.
> 
> Testing includes:
> - Boot testing on OMAP5912 OSK, OMAP2420 H4, OMAP3430 SDP, OMAP4430 SDP
>   and AM335x EVM.
> - Verified that GPIO interrupts are working on OMAP5912 OSK, OMAP2420 H4,
>   OMAP3430 SDP and OMAP4430 SDP by making sure networking was working
>   correctly as these boards use a GPIO with the ethernet chips. Also
>   checked /proc/interrupts to ensure GPIO interrupt counts are
>   incrementing as expected.
> 
> [1] http://git.kernel.org/cgit/linux/kernel/git/bcousson/linux-omap-dt.git
> 
> Jon Hunter (4):
>   gpio/omap: free irq domain in probe() failure paths
>   gpio/omap: optimise interrupt service routine
>   gpio/omap: force restore if context loss is not detectable
>   ARM: dts: OMAP2+: Identify GPIO banks that are always powered
> 
> Tarun Kanti DebBarma (1):
>   gpio/omap: remove extra context restores in *_runtime_resume()
>

Thanks Jon for pulling the fixes. I suggest you to split the series so
that 'gpio/omap:*' can be pulled by Grant and 'ARM: dts:*' by Benoit.

All the 'gpio/omap:*' patches in the series looks fine to me.
FWIW,
Acked-by: Santosh Shilimkar <santosh.shilimkar at ti.com>