[PATCH V2 1/2] ARM: bcm2835: add simple framebuffer to device tree

[Stephen Warren]

Place a template simple-framebuffer device into the RPi device tree. The
bootloader is expected to fill in all the parameters at boot time.
Hence, disable the device by default, so if the bootloader doesn't do
this, the device isn't activated with invalid parameters.

Signed-off-by: Stephen Warren <swarren at wwwdotorg.org>
---
v2: s/dumb/simple/ throughout.
---
 arch/arm/boot/dts/bcm2835-rpi-b.dts |   11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index aafda17..09e0d40 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -8,6 +8,17 @@
 	memory {
 		reg = <0 0x10000000>;
 	};
+
+	framebuffer {
+		compatible = "simple-framebuffer";
+		status = "disabled";
+		/* The bootloader is expected to fill these in */
+		reg = <0 0>;
+		width = <0>;
+		height = <0>;
+		stride = <0>;
+		format = "";
+	};
 };
 
 &gpio {
-- 
1.7.10.4