[PATCH v2] ARM: dts: Add initial support for Wandboard Dual-Lite
Fabio Estevam
fabio.estevam at freescale.com
Wed Apr 3 08:29:16 EDT 2013
Wandboard is a development board that has two variants: one version based
on mx6 dual lite and another one based on mx6 solo.
For more details about Wandboard, please refer to: http://www.wandboard.org/
Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
Changes since v1:
- Use im6xdl instead of imx6q
- Use pinctrl_usdhc3_2 for label
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6dl-wandboard.dtsp | 40 +++++++++++++++++++++++++++++++
arch/arm/boot/dts/imx6dl.dtsip | 11 +++++++++
3 files changed, 52 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6dl-wandboard.dtsp
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 5345ac1..a566619 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -100,6 +100,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
imx53-smd.dtb \
imx6dl-sabreauto.dtb \
imx6dl-sabresd.dtb \
+ imx6dl-wandboard.dtb \
imx6q-arm2.dtb \
imx6q-sabreauto.dtb \
imx6q-sabrelite.dtb \
diff --git a/arch/arm/boot/dts/imx6dl-wandboard.dtsp b/arch/arm/boot/dts/imx6dl-wandboard.dtsp
new file mode 100644
index 0000000..e95d2b0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-wandboard.dtsp
@@ -0,0 +1,40 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam at freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6dl.dtsip"
+
+/ {
+ model = "Wandboard i.MX6 Dual Lite Board";
+ compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_1>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_2>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl.dtsip b/arch/arm/boot/dts/imx6dl.dtsip
index 951ba53..2e6cff0 100644
--- a/arch/arm/boot/dts/imx6dl.dtsip
+++ b/arch/arm/boot/dts/imx6dl.dtsip
@@ -136,6 +136,17 @@
MX6DL_PAD_SD3_DAT7__SD3_DATA7 0x17059
>;
};
+
+ pinctrl_usdhc3_2: usdhc3grp_2 {
+ fsl,pins = <
+ MX6DL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6DL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6DL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6DL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6DL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6DL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ >;
+ };
};
--
1.7.9.5
More information about the linux-arm-kernel
mailing list