[PATCH v3] ARM: omap2: twl-common: Add default power configuration

Peter Ujfalusi peter.ujfalusi at ti.com
Wed Apr 3 08:27:28 EDT 2013


Whata...

On 04/03/2013 01:59 PM, Peter Ujfalusi wrote:
> From: Matthias Brugger <matthias.bgg at gmail.com>
> 
> This patch adds a generic power script configuration.
> When rebooting an OMAP3530 at 125 MHz, the reboot hangs.
> With the generic power script, TWL4030 will be reset
> when a warm reset occures. This way the OMAP3530 does not
> hang on reboot.
> 
> Signed-off-by: Matthias Brugger <matthias.bgg at gmail.com>
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
> ---
> Tony, Matthias,
> 
> Changes since v2:
> - remove the __initdata from all the structures introduced by this patch
> 
> Regards,
> Peter
> 
>  arch/arm/mach-omap2/twl-common.c | 38 ++++++++++++++++++++++++++++++++++++++
>  arch/arm/mach-omap2/twl-common.h |  1 +
>  2 files changed, 39 insertions(+)
> 
> diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
> index 51e138c..7551bbc 100644
> --- a/arch/arm/mach-omap2/twl-common.c
> +++ b/arch/arm/mach-omap2/twl-common.c
> @@ -121,6 +121,41 @@ static struct twl4030_audio_data omap3_audio_pdata = {
>  	.codec = &omap3_codec,
>  };
>  
> +static struct twl4030_ins wrst_seq[] __initdata = {

The __initdata remained :o

Will resend it.

> +	{MSG_SINGULAR(DEV_GRP_NULL, 0x1b, RES_STATE_OFF), 2},
> +	{MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_WRST), 15},
> +	{MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_WRST), 15},
> +	{MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_WRST), 0x60},
> +	{MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_ACTIVE), 2},
> +	{MSG_SINGULAR(DEV_GRP_NULL, 0x1b, RES_STATE_ACTIVE), 2},
> +};
> +
> +static struct twl4030_script wrst_script __initdata = {
> +	.script = wrst_seq,
> +	.size	= ARRAY_SIZE(wrst_seq),
> +	.flags	= TWL4030_WRST_SCRIPT,
> +};
> +
> +static struct twl4030_script *omap3_power_scripts[] __initdata = {
> +	&wrst_script,
> +};
> +
> +static struct twl4030_resconfig omap3_rconfig[] __initdata = {
> +	{ .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3, .type = -1,
> +		.type2 = -1 },
> +	{ .resource = RES_VDD1, .devgroup = DEV_GRP_P1, .type = -1,
> +		.type2 = -1 },
> +	{ .resource = RES_VDD2, .devgroup = DEV_GRP_P1, .type = -1,
> +		.type2 = -1 },
> +	{ 0, 0},
> +};
> +
> +static struct twl4030_power_data omap3_power_pdata __initdata = {
> +	.scripts	= omap3_power_scripts,
> +	.num		= ARRAY_SIZE(omap3_power_scripts),
> +	.resource_config = omap3_rconfig,
> +};
> +
>  static struct regulator_consumer_supply omap3_vdda_dac_supplies[] = {
>  	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
>  };
> @@ -225,6 +260,9 @@ void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
>  	if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->audio)
>  		pmic_data->audio = &omap3_audio_pdata;
>  
> +	if (pdata_flags & TWL_COMMON_PDATA_POWER && !pmic_data->power)
> +		pmic_data->power = &omap3_power_pdata;
> +
>  	/* Common regulator configurations */
>  	if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac)
>  		pmic_data->vdac = &omap3_vdac_idata;
> diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h
> index 24b65d0..b64590b8 100644
> --- a/arch/arm/mach-omap2/twl-common.h
> +++ b/arch/arm/mach-omap2/twl-common.h
> @@ -7,6 +7,7 @@
>  #define TWL_COMMON_PDATA_BCI		(1 << 1)
>  #define TWL_COMMON_PDATA_MADC		(1 << 2)
>  #define TWL_COMMON_PDATA_AUDIO		(1 << 3)
> +#define TWL_COMMON_PDATA_POWER		(1 << 4)
>  
>  /* Common LDO regulators for TWL4030/TWL6030 */
>  #define TWL_COMMON_REGULATOR_VDAC	(1 << 0)
> 


-- 
Péter



More information about the linux-arm-kernel mailing list