[PATCH/RFC 1/2] irqchip: renesas-intc-irqpin: DT binding for sense bitfield width
Guennadi Liakhovetski
g.liakhovetski at gmx.de
Wed Apr 3 05:19:03 EDT 2013
Most Renesas irqpin controllers have 4-bit sense fields, however, some
have different widths. This patch adds a DT binding to optionally
specify such non-standard values.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas at gmail.com>
---
.../interrupt-controller/renesas,intc-irqpin.txt | 2 ++
drivers/irqchip/irq-renesas-intc-irqpin.c | 5 ++++-
2 files changed, 6 insertions(+), 1 deletions(-)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt
index e55d183..6b48742 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt
@@ -11,3 +11,5 @@ Optional properties:
resource allocation properties
- control-parent: disable and enable interrupts on the parent interrupt
controller, needed for some broken implementations
+- sense-bitfield-width: width of a single sense bitfield in the SENSE register,
+ if different from the default 4 bits
diff --git a/drivers/irqchip/irq-renesas-intc-irqpin.c b/drivers/irqchip/irq-renesas-intc-irqpin.c
index 82bbe8f..6aadfe6 100644
--- a/drivers/irqchip/irq-renesas-intc-irqpin.c
+++ b/drivers/irqchip/irq-renesas-intc-irqpin.c
@@ -381,9 +381,12 @@ static int intc_irqpin_probe(struct platform_device *pdev)
for (k = 0; k < p->number_of_irqs; k++)
intc_irqpin_mask_unmask_prio(p, k, 1);
- if (!pdata)
+ if (!pdata) {
p->config.control_parent = of_property_read_bool(pdev->dev.of_node,
"control-parent");
+ of_property_read_u32(pdev->dev.of_node, "sense-bitfield-width",
+ &p->config.sense_bitfield_width);
+ }
/* use more severe masking method if requested */
if (p->config.control_parent) {
--
1.7.2.5
More information about the linux-arm-kernel
mailing list