[PATCH 14/28] sh-pfc: r8a7779: Remove GPIO data

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>

GPIOs are now handled by a separate driver, remove GPIO data from the
SoC information structure.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij at linaro.org>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 drivers/pinctrl/sh-pfc/pfc-r8a7779.c |   58 +---------------------------------
 1 file changed, 1 insertion(+), 57 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7779.c b/drivers/pinctrl/sh-pfc/pfc-r8a7779.c
index 41d8bda..e448ff1 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7779.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7779.c
@@ -85,18 +85,12 @@
 	}
 
 #define _GP_DATA(bank, pin, name, sfx)					\
-	PINMUX_DATA(name##_DATA, name##_FN, name##_IN, name##_OUT)
-
-#define _GP_INOUTSEL(bank, pin, name, sfx)	name##_IN, name##_OUT
-#define _GP_INDT(bank, pin, name, sfx)		name##_DATA
+	PINMUX_DATA(name##_DATA, name##_FN)
 
 #define GP_ALL(str)		CPU_ALL_PORT(_GP_PORT_ALL, str)
 #define PINMUX_GPIO_GP_ALL()	CPU_ALL_PORT(_GP_GPIO, unused)
 #define PINMUX_DATA_GP_ALL()	CPU_ALL_PORT(_GP_DATA, unused)
 
-#define GP_INOUTSEL(bank) PORT_GP_32_REV(bank, _GP_INOUTSEL, unused)
-#define GP_INDT(bank) PORT_GP_32_REV(bank, _GP_INDT, unused)
-
 #define PINMUX_IPSR_DATA(ipsr, fn) PINMUX_DATA(fn##_MARK, FN_##ipsr, FN_##fn)
 #define PINMUX_IPSR_MODSEL_DATA(ipsr, fn, ms) PINMUX_DATA(fn##_MARK, FN_##ms, \
 							  FN_##ipsr, FN_##fn)
@@ -108,14 +102,6 @@ enum {
 	GP_ALL(DATA), /* GP_0_0_DATA -> GP_6_8_DATA */
 	PINMUX_DATA_END,
 
-	PINMUX_INPUT_BEGIN,
-	GP_ALL(IN), /* GP_0_0_IN -> GP_6_8_IN */
-	PINMUX_INPUT_END,
-
-	PINMUX_OUTPUT_BEGIN,
-	GP_ALL(OUT), /* GP_0_0_OUT -> GP_6_8_OUT */
-	PINMUX_OUTPUT_END,
-
 	PINMUX_FUNCTION_BEGIN,
 	GP_ALL(FN), /* GP_0_0_FN -> GP_6_8_FN */
 
@@ -3549,45 +3535,6 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 	    /* SEL_I2C1 [2] */
 	    FN_SEL_I2C1_0, FN_SEL_I2C1_1, FN_SEL_I2C1_2, FN_SEL_I2C1_3 }
 	},
-	{ PINMUX_CFG_REG("INOUTSEL0", 0xffc40004, 32, 1) { GP_INOUTSEL(0) } },
-	{ PINMUX_CFG_REG("INOUTSEL1", 0xffc41004, 32, 1) { GP_INOUTSEL(1) } },
-	{ PINMUX_CFG_REG("INOUTSEL2", 0xffc42004, 32, 1) { GP_INOUTSEL(2) } },
-	{ PINMUX_CFG_REG("INOUTSEL3", 0xffc43004, 32, 1) { GP_INOUTSEL(3) } },
-	{ PINMUX_CFG_REG("INOUTSEL4", 0xffc44004, 32, 1) { GP_INOUTSEL(4) } },
-	{ PINMUX_CFG_REG("INOUTSEL5", 0xffc45004, 32, 1) { GP_INOUTSEL(5) } },
-	{ PINMUX_CFG_REG("INOUTSEL6", 0xffc46004, 32, 1) {
-		0, 0, 0, 0, 0, 0, 0, 0,	0, 0, 0, 0, 0, 0, 0, 0,
-		0, 0, 0, 0, 0, 0, 0, 0,	0, 0, 0, 0, 0, 0, 0, 0,
-		0, 0, 0, 0, 0, 0, 0, 0,
-		0, 0,
-		0, 0,
-		0, 0,
-		GP_6_8_IN, GP_6_8_OUT,
-		GP_6_7_IN, GP_6_7_OUT,
-		GP_6_6_IN, GP_6_6_OUT,
-		GP_6_5_IN, GP_6_5_OUT,
-		GP_6_4_IN, GP_6_4_OUT,
-		GP_6_3_IN, GP_6_3_OUT,
-		GP_6_2_IN, GP_6_2_OUT,
-		GP_6_1_IN, GP_6_1_OUT,
-		GP_6_0_IN, GP_6_0_OUT, }
-	},
-	{ },
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
-	{ PINMUX_DATA_REG("INDT0", 0xffc40008, 32) { GP_INDT(0) } },
-	{ PINMUX_DATA_REG("INDT1", 0xffc41008, 32) { GP_INDT(1) } },
-	{ PINMUX_DATA_REG("INDT2", 0xffc42008, 32) { GP_INDT(2) } },
-	{ PINMUX_DATA_REG("INDT3", 0xffc43008, 32) { GP_INDT(3) } },
-	{ PINMUX_DATA_REG("INDT4", 0xffc44008, 32) { GP_INDT(4) } },
-	{ PINMUX_DATA_REG("INDT5", 0xffc45008, 32) { GP_INDT(5) } },
-	{ PINMUX_DATA_REG("INDT6", 0xffc46008, 32) {
-		0, 0, 0, 0, 0, 0, 0, 0,	0, 0, 0, 0, 0, 0, 0, 0,
-		0, 0, 0, 0, 0, 0, 0, GP_6_8_DATA,
-		GP_6_7_DATA, GP_6_6_DATA, GP_6_5_DATA, GP_6_4_DATA,
-		GP_6_3_DATA, GP_6_2_DATA, GP_6_1_DATA, GP_6_0_DATA }
-	},
 	{ },
 };
 
@@ -3596,8 +3543,6 @@ const struct sh_pfc_soc_info r8a7779_pinmux_info = {
 
 	.unlock_reg = 0xfffc0000, /* PMMR */
 
-	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
-	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
 	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
 
 	.pins = pinmux_pins,
@@ -3608,7 +3553,6 @@ const struct sh_pfc_soc_info r8a7779_pinmux_info = {
 	.nr_functions = ARRAY_SIZE(pinmux_functions),
 
 	.cfg_regs = pinmux_config_regs,
-	.data_regs = pinmux_data_regs,
 
 	.gpio_data = pinmux_data,
 	.gpio_data_size = ARRAY_SIZE(pinmux_data),
-- 
1.7.10.4