[GIT PULL] at91: soc for 3.10 #2

Olof Johansson olof at lixom.net
Tue Apr 2 20:26:30 EDT 2013


On Wed, Mar 27, 2013 at 12:01 PM, Arnd Bergmann <arnd at arndb.de> wrote:
> On Wednesday 27 March 2013, Nicolas Ferre wrote:
>
>> ----------------------------------------------------------------
>> Introduction of new Atmel Cortex-A5: SAMA5D3 family.
>> - Modify AT91 Kconfig to plit ARMv4/5 and ARMv7 arch
>> - Modify PMC driver (clocks)
>> - Core SAMA5 support
>> - Board file, DT files and defconfig
>
> Looks really good. Olof said he'd take over merging tomorrow,
> so I'll leave it for him.
>
>> ----------------------------------------------------------------
>> Ludovic Desroches (6):
>>       ARM: at91: change name template in AT91_SOC_START macro
>>       ARM: at91: add AT91_SAM9_TIME entry to select at91sam926x_time.c compilation
>>       ARM: at91: introduce the core type choice to split ARMv4/5 and ARMv7 arch
>>       ARM: at91: introduce SAMA5 support
>>       ARM: at91: dt: add device tree files for SAMA5D3 family
>>       ARM: at91: add defconfig for SAMA5
>
> There is one obvious change that would be nice to include here,
> can you add this on top (either Nicolas or Olof)?
>
> 8<---------
> Subject: ARM: at91: make ATAGS support conditional on CONFIG_ATAGS
>
> We have the global CONFIG_ATAGS symbol that is used to determine
> whether ATAGS based boot is possible or not. Since we are
> splitting out the legacy boards from the main Kconfig on at91,
> we can use that symbol to easily hide the old options.
>
> Signed-off-by: Arnd Bergmann <arnd at arndb.de>
>
> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> index 0280238..119a0a4 100644
> --- a/arch/arm/mach-at91/Kconfig
> +++ b/arch/arm/mach-at91/Kconfig
> @@ -137,8 +137,9 @@ config SOC_AT91SAM9N12
>           Select this if you are using Atmel's AT91SAM9N12 SoC.
>
>  # ----------------------------------------------------------
> -
> +if ATAGS
>  source arch/arm/mach-at91/Kconfig.non_dt
> +endif
>  endif # SOC_SAM_V4_V5
>
>  comment "Generic Board Type"

Actually, it's not that simple. With this patch, I get:

arch/arm/Kconfig:1841:error: recursive dependency detected!
arch/arm/Kconfig:1841:  symbol USE_OF is selected by MACH_AT91RM9200_DT
arch/arm/mach-at91/Kconfig:147: symbol MACH_AT91RM9200_DT depends on
SOC_AT91RM9200
arch/arm/mach-at91/Kconfig:74:  symbol SOC_AT91RM9200 is selected by
ARCH_AT91RM9200
arch/arm/mach-at91/Kconfig.non_dt:12:   symbol ARCH_AT91RM9200 is part
of choice <choice>
arch/arm/mach-at91/Kconfig.non_dt:6:    choice <choice> contains symbol <choice>
arch/arm/mach-at91/Kconfig.non_dt:6:    choice <choice> contains symbol ATAGS
arch/arm/Kconfig:1850:  symbol ATAGS depends on USE_OF

Also, USE_OF isn't set at that point (it's controlled by the next
section), so it can't be used as a replacement.

Also, isn't it a bit backwards in the first place to first set ATAGS
vs no-ATAGS, and then get to choose what hardware you want to build
for?

I'll take off the last patch from the branch and re-merge it (since I
hadn't pushed it out yet), the above can be sorted out separately.


-Olof



More information about the linux-arm-kernel mailing list