[PATCH V5 1/6] USB: EHCI: make ehci-orion a separate driver
Arnd Bergmann
arnd at arndb.de
Tue Apr 2 12:23:59 EDT 2013
From: Manjunath Goudar <manjunath.goudar at linaro.org>
Separate the Orion host controller driver from ehci-hcd host
code into its own driver module because of following reason.
With the multiplatform changes in arm-soc tree, it becomes
possible to enable the mvebu platform (which uses
ehci-orion) at the same time as other platforms that require
a conflicting EHCI bus glue. At the moment, this results
in a warning like
drivers/usb/host/ehci-hcd.c:1297:0: warning: "PLATFORM_DRIVER" redefined [enabled by default]
drivers/usb/host/ehci-hcd.c:1277:0: note: this is the location of the previous definition
drivers/usb/host/ehci-orion.c:334:31: warning: 'ehci_orion_driver' defined but not used [-Wunused-variable]
and an ehci driver that only works on one of them.
With the infrastructure added by Alan Stern in patch 3e0232039
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the orion bus glue.
An earlier version of this patch was included in 3.9 but caused
a regression there, which has subsequently been fixed.
While we are here, use the opportunity to disabiguate the two
Marvell EHCI controller implementations in Kconfig.
In V4 (arnd):
- Improve Kconfig text
In V3:
- More detail provided in commit message regarding this patch.
- Replaced hcd_name string "ehci-orion" into "orion-ehci".
- MODULE_LICENSE is GPL v2.
- In ehci_init_driver calling second argument passed as NULL instead of
ehci_orion_overrides because ehci_orion_overrides is removed.
In V2:
- Tegra patch related changes removed from this patch.
Signed-off-by: Manjunath Goudar <manjunath.goudar at linaro.org>
Signed-off-by: Arnd Bergmann <arnd at arndb.de>
Acked-by: Jason Cooper <jason at lakedaemon.net>
Tested-by: Andrew Lunn <andrew at lunn.ch>
Acked-by: Alan Stern <stern at rowland.harvard.edu>
---
drivers/usb/host/Kconfig | 17 ++++++++-
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-hcd.c | 6 +---
drivers/usb/host/ehci-orion.c | 82 ++++++++++++++++++-------------------------
4 files changed, 53 insertions(+), 53 deletions(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 2f68221..e5649c1 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -163,6 +163,17 @@ config USB_EHCI_HCD_OMAP
Enables support for the on-chip EHCI controller on
OMAP3 and later chips.
+config USB_EHCI_HCD_ORION
+ tristate "Support for Marvell EBU on-chip EHCI USB controller"
+ depends on USB_EHCI_HCD && PLAT_ORION
+ default y
+ ---help---
+ Enables support for the on-chip EHCI controller on Marvell's
+ embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP,
+ Armada 370. This is different from the EHCI implementation
+ on Marvell's mobile PXA and MMP SoC, see "EHCI support for
+ Marvell PXA/MMP USB controller" for those.
+
config USB_EHCI_MSM
bool "Support for MSM on-chip EHCI USB controller"
depends on USB_EHCI_HCD && ARCH_MSM
@@ -206,13 +217,17 @@ config USB_EHCI_S5P
Enable support for the S5P SOC's on-chip EHCI controller.
config USB_EHCI_MV
- bool "EHCI support for Marvell on-chip controller"
+ bool "EHCI support for Marvell PXA/MMP USB controller"
depends on USB_EHCI_HCD && (ARCH_PXA || ARCH_MMP)
select USB_EHCI_ROOT_HUB_TT
---help---
Enables support for Marvell (including PXA and MMP series) on-chip
USB SPH and OTG controller. SPH is a single port host, and it can
only be EHCI host. OTG is controller that can switch to host mode.
+ Note that this driver will not work on Marvell's other EHCI
+ controller used by the EBU-type SoCs including Orion, Kirkwood,
+ Dova, Armada 370 and Armada XP. See "Support for Marvell EBU
+ on-chip EHCI USB controller" for those.
config USB_W90X900_EHCI
bool "W90X900(W90P910) EHCI support"
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 56de410..9492f50 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
obj-$(CONFIG_USB_EHCI_HCD_PLATFORM) += ehci-platform.o
obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
obj-$(CONFIG_USB_EHCI_HCD_OMAP) += ehci-omap.o
+obj-$(CONFIG_USB_EHCI_HCD_ORION) += ehci-orion.o
obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index b12b97d..1f97268 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1249,11 +1249,6 @@ MODULE_LICENSE ("GPL");
#define XILINX_OF_PLATFORM_DRIVER ehci_hcd_xilinx_of_driver
#endif
-#ifdef CONFIG_PLAT_ORION
-#include "ehci-orion.c"
-#define PLATFORM_DRIVER ehci_orion_driver
-#endif
-
#ifdef CONFIG_USB_W90X900_EHCI
#include "ehci-w90x900.c"
#define PLATFORM_DRIVER ehci_hcd_w90x900_driver
@@ -1319,6 +1314,7 @@ MODULE_LICENSE ("GPL");
!IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \
!IS_ENABLED(CONFIG_USB_EHCI_MXC) && \
!IS_ENABLED(CONFIG_USB_EHCI_HCD_OMAP) && \
+ !IS_ENABLED(CONFIG_USB_EHCI_HCD_ORION) && \
!defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && \
!defined(OF_PLATFORM_DRIVER) && \
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 38c45fb..54c5794 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -17,6 +17,12 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+
+#include "ehci.h"
#define rdl(off) __raw_readl(hcd->regs + (off))
#define wrl(off, val) __raw_writel((val), hcd->regs + (off))
@@ -34,6 +40,12 @@
#define USB_PHY_IVREF_CTRL 0x440
#define USB_PHY_TST_GRP_CTRL 0x450
+#define DRIVER_DESC "EHCI orion driver"
+
+static const char hcd_name[] = "ehci-orion";
+
+static struct hc_driver __read_mostly ehci_orion_hc_driver;
+
/*
* Implement Orion USB controller specification guidelines
*/
@@ -104,51 +116,6 @@ static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
wrl(USB_MODE, 0x13);
}
-static const struct hc_driver ehci_orion_hc_driver = {
- .description = hcd_name,
- .product_desc = "Marvell Orion EHCI",
- .hcd_priv_size = sizeof(struct ehci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2,
-
- /*
- * basic lifecycle operations
- */
- .reset = ehci_setup,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
-
- /*
- * scheduling support
- */
- .get_frame_number = ehci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
-
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
static void
ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
const struct mbus_dram_target_info *dram)
@@ -323,8 +290,6 @@ static int ehci_orion_drv_remove(struct platform_device *pdev)
return 0;
}
-MODULE_ALIAS("platform:orion-ehci");
-
static const struct of_device_id ehci_orion_dt_ids[] = {
{ .compatible = "marvell,orion-ehci", },
{},
@@ -341,3 +306,26 @@ static struct platform_driver ehci_orion_driver = {
.of_match_table = of_match_ptr(ehci_orion_dt_ids),
},
};
+
+static int __init ehci_orion_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+ ehci_init_driver(&ehci_orion_hc_driver, NULL);
+ return platform_driver_register(&ehci_orion_driver);
+}
+module_init(ehci_orion_init);
+
+static void __exit ehci_orion_cleanup(void)
+{
+ platform_driver_unregister(&ehci_orion_driver);
+}
+module_exit(ehci_orion_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_ALIAS("platform:orion-ehci");
+MODULE_AUTHOR("Tzachi Perelstein");
+MODULE_LICENSE("GPL v2");
--
1.8.1.2
More information about the linux-arm-kernel
mailing list