[PATCH] ARM: mxs: Slow down the I2C clock speed

[Shawn Guo]

Marek,

On Tue, Apr 02, 2013 at 01:29:29AM +0200, Marek Vasut wrote:
> Slow down the I2C clock speed on M28 and SPS1 as it turns out the
> I2C block in i.MX28 can not operate stable enough with the bus
> running at 400kHz. Note that the driver used by Freescale runs
> the bus at 250kHz when 400kHz speed is selected, but the mainline
> Linux kernel runs the bus at actual 400kHz and that's where it is
> occasionally unstable. Play safe and run the bus at 100kHz.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>

You consider it a fix for 3.9 or just material for 3.10?

Shawn