[Query] PM runtime API

[Sekhar Nori]

On 4/2/2013 4:22 PM, Prabhakar Lad wrote:
> Hi Sekhar,
> 
> On Tue, Apr 2, 2013 at 4:10 PM, Sekhar Nori <nsekhar at ti.com> wrote:
>> On 4/2/2013 4:05 PM, Prabhakar Lad wrote:
>>> Hi Kevin/Sekhar,
>>>
>>> I am porting the VPSS davinci driver to pm runtime API. This driver uses two
>>> clocks vpss_master and vpss_slave. The driver was initially using common clock
>>> framework, now when migrated i see only one clock enabled.
>>>
>>> 1: Does pm runtime match only with the device id to enable the clock ?
>>>
>>>  2:
>>>       CLK("vpss", "master", &vpss_master_clk),
>>>       CLK("vpss", "slave", &vpss_slave_clk),
>>>      If I provide above two clock lookups pm runtime doesnt enable
>>> them, but If I set
>>>      the connection id as NULL then only the master clock gets enabled.
>>>
>>> My understanding is that pm runtime matches upon the device id for the
>>> first entry and only enables it.
>>>
>>> Any inputs/suggestion how to handle it.
>>
>> I think you need to tell pm_runtime about the con_ids. See the
>> initialization of pm_clk_notifier_block in
>> arch/arm/mach-davinci/pm_domain.c. There is a list of known con_ids that
>> need to passed.
>>
> This helps!. Now looks like this con_ids is generic , I have added two
> con_ids "master" and "slave" does that sound good to you or

That is good.

Thanks,
Sekhar

> should i add something to driver specific like "vpss_master" and "vpss_slave" ?