[PATCH] pinctrl: imx5: fix SD2_DATA1 pad AUDMUX_AUD4 configuration

[Marek Vasut]

The IOMUXC_AUDMUX_P4_INPUT_TXCLK_AMX_SELECT_INPUT must be configured as 1
instead of 0 to have AUD4 muxed on SD2 pins working.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Fabio Estevam <fabio.estevam at freescale.com>
Cc: Linus Walleij <linus.walleij at linaro.org>
Cc: Philipp Zabel <p.zabel at pengutronix.de>
Cc: Shawn Guo <shawn.guo at linaro.org>
---
 drivers/pinctrl/pinctrl-imx53.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

NOTE: Shawn, we might want this in -stable too ?

diff --git a/drivers/pinctrl/pinctrl-imx53.c b/drivers/pinctrl/pinctrl-imx53.c
index 2c9c8e2..85f401c 100644
--- a/drivers/pinctrl/pinctrl-imx53.c
+++ b/drivers/pinctrl/pinctrl-imx53.c
@@ -1287,7 +1287,7 @@ static struct imx_pin_reg imx53_pin_regs[] = {
 	IMX_PIN_REG(MX53_PAD_SD2_DATA1, 0x698, 0x30C, 0, 0x000, 0), /* MX53_PAD_SD2_DATA1__ESDHC2_DAT1 */
 	IMX_PIN_REG(MX53_PAD_SD2_DATA1, 0x698, 0x30C, 1, 0x000, 0), /* MX53_PAD_SD2_DATA1__GPIO1_14 */
 	IMX_PIN_REG(MX53_PAD_SD2_DATA1, 0x698, 0x30C, 2, 0x848, 1), /* MX53_PAD_SD2_DATA1__KPP_COL_7 */
-	IMX_PIN_REG(MX53_PAD_SD2_DATA1, 0x698, 0x30C, 3, 0x744, 0), /* MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS */
+	IMX_PIN_REG(MX53_PAD_SD2_DATA1, 0x698, 0x30C, 3, 0x744, 1), /* MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS */
 	IMX_PIN_REG(MX53_PAD_SD2_DATA1, 0x698, 0x30C, 5, 0x78C, 4), /* MX53_PAD_SD2_DATA1__CSPI_SS0 */
 	IMX_PIN_REG(MX53_PAD_SD2_DATA1, 0x698, 0x30C, 7, 0x000, 0), /* MX53_PAD_SD2_DATA1__RTIC_SEC_VIO */
 	IMX_PIN_REG(MX53_PAD_SD2_DATA0, 0x69C, 0x310, 0, 0x000, 0), /* MX53_PAD_SD2_DATA0__ESDHC2_DAT0 */
-- 
1.7.10.4