[PATCH V2] DMA: PL330: Add check if device tree compatible
Padma Venkat
padma.kvr at gmail.com
Mon Apr 1 22:58:10 EDT 2013
Hi Vinod,
I apologies for the delayed reply. Last week I was out of station and
no access to mails. I will send another patch addressing your
comments.
Thanks
Padma
On Mon, Apr 1, 2013 at 11:51 PM, Vinod Koul <vinod.koul at intel.com> wrote:
>
> On Mon, Apr 01, 2013 at 08:13:31AM -0500, Rob Herring wrote:
> > On Thu, Mar 21, 2013 at 4:39 AM, Vinod Koul <vinod.koul at intel.com> wrote:
> > > On Tue, Mar 05, 2013 at 02:55:31PM +0530, Padmavathi Venna wrote:
> > >> This patch register the dma controller with generic dma helpers only
> > >> in DT case. This also adds some extra error handling in the driver.
> > >>
> > >> Signed-off-by: Padmavathi Venna <padma.v at samsung.com>
> > >> Reported-by: Sachin Kamat <sachin.kamat at linaro.org>
> >
> > What's the status on this? It is needed for 3.9 to fix pl330 on highbank.
> Well the status is that submitter has been rude. I had few questions and
> comments on this patch and they are yet to be addressed.
>
> --
> ~Vinod
> >
> > Rob
> >
> > >> ---
> > >>
> > >> Based on Vinod Koul next branch.
> > >>
> > >> Changes since V1:
> > >> - return silently when of_dma_controller_register fails, as
> > >> suggested by Arnd.
> > >>
> > >> drivers/dma/pl330.c | 38 +++++++++++++++++++++++++++-----------
> > >> 1 files changed, 27 insertions(+), 11 deletions(-)
> > >>
> > >> diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
> > >> index 7181531..5dbc594 100644
> > >> --- a/drivers/dma/pl330.c
> > >> +++ b/drivers/dma/pl330.c
> > >> @@ -2882,7 +2882,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
> > >> {
> > >> struct dma_pl330_platdata *pdat;
> > >> struct dma_pl330_dmac *pdmac;
> > >> - struct dma_pl330_chan *pch;
> > >> + struct dma_pl330_chan *pch, *_p;
> > >> struct pl330_info *pi;
> > >> struct dma_device *pd;
> > >> struct resource *res;
> > >> @@ -2984,7 +2984,16 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
> > >> ret = dma_async_device_register(pd);
> > >> if (ret) {
> > >> dev_err(&adev->dev, "unable to register DMAC\n");
> > >> - goto probe_err2;
> > >> + goto probe_err3;
> > >> + }
> > >> +
> > >> + if (adev->dev.of_node) {
> > >> + ret = of_dma_controller_register(adev->dev.of_node,
> > >> + of_dma_pl330_xlate, pdmac);
> > >> + if (ret) {
> > >> + dev_err(&adev->dev,
> > >> + "unable to register DMA to the generic DT DMA helpers\n");
> > > Indent?
Okey.
>
> > >> + }
> > >> }
> > >>
> > >> dev_info(&adev->dev,
> > >> @@ -2995,16 +3004,21 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
> > >> pi->pcfg.data_bus_width / 8, pi->pcfg.num_chan,
> > >> pi->pcfg.num_peri, pi->pcfg.num_events);
> > >>
> > >> - ret = of_dma_controller_register(adev->dev.of_node,
> > >> - of_dma_pl330_xlate, pdmac);
> > >> - if (ret) {
> > >> - dev_err(&adev->dev,
> > >> - "unable to register DMA to the generic DT DMA helpers\n");
> > >> - goto probe_err2;
> > >> - }
> > >> -
> > >> return 0;
> > >> +probe_err3:
> > >> + amba_set_drvdata(adev, NULL);
> > >>
> > >> + /* Idle the DMAC */
> > >> + list_for_each_entry_safe(pch, _p, &pdmac->ddma.channels,
> > >> + chan.device_node) {
> > >> +
> > >> + /* Remove the channel */
> > >> + list_del(&pch->chan.device_node);
> > >> +
> > >> + /* Flush the channel */
> > >> + pl330_control(&pch->chan, DMA_TERMINATE_ALL, 0);
> > >> + pl330_free_chan_resources(&pch->chan);
> > > free_chan for error handling in probe?
Will remove this.
> > >
>
> > >> + }
> > >> probe_err2:
> > >> pl330_del(pi);
> > >> probe_err1:
> > >> @@ -3023,8 +3037,10 @@ static int pl330_remove(struct amba_device *adev)
> > >> if (!pdmac)
> > >> return 0;
> > >>
> > >> - of_dma_controller_free(adev->dev.of_node);
> > >> + if (adev->dev.of_node)
> > >> + of_dma_controller_free(adev->dev.of_node);
> > >>
> > >> + dma_async_device_unregister(&pdmac->ddma);
> > >> amba_set_drvdata(adev, NULL);
> > >>
> > >> /* Idle the DMAC */
> > >> --
> > >> 1.7.4.4
> > >>
More information about the linux-arm-kernel
mailing list