[PATCH V3 2/2] dmaengine: OMAP: Register SDMA controller with Device Tree DMA driver
Jon Hunter
jon-hunter at ti.com
Mon Apr 1 13:48:26 EDT 2013
Vinod,
On 03/20/2013 11:36 AM, Tony Lindgren wrote:
> * Jon Hunter <jon-hunter at ti.com> [130319 09:08]:
>> Vinod, Tony, Benoit,
>>
>> On 02/26/2013 12:27 PM, Jon Hunter wrote:
>>> If the device-tree blob is present during boot, then register the SDMA
>>> controller with the device-tree DMA driver so that we can use device-tree
>>> to look-up DMA client information.
>>>
>>> Signed-off-by: Jon Hunter <jon-hunter at ti.com>
>>> Reviewed-by: Felipe Balbi <balbi at ti.com>
>>> Acked-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
>>> Tested-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
>>> ---
>>> arch/arm/mach-omap2/dma.c | 4 ++++
>>> drivers/dma/omap-dma.c | 38 ++++++++++++++++++++++++++++++++++++--
>>> 2 files changed, 40 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
>>> index dab9fc0..49fd0d5 100644
>>> --- a/arch/arm/mach-omap2/dma.c
>>> +++ b/arch/arm/mach-omap2/dma.c
>>> @@ -28,6 +28,7 @@
>>> #include <linux/init.h>
>>> #include <linux/device.h>
>>> #include <linux/dma-mapping.h>
>>> +#include <linux/of.h>
>>> #include <linux/omap-dma.h>
>>>
>>> #include "soc.h"
>>> @@ -304,6 +305,9 @@ static int __init omap2_system_dma_init(void)
>>> if (res)
>>> return res;
>>>
>>> + if (of_have_populated_dt())
>>> + return res;
>>> +
>>> pdev = platform_device_register_full(&omap_dma_dev_info);
>>> if (IS_ERR(pdev))
>>> return PTR_ERR(pdev);
>
> AFAIK we don't currently have anything else touching this file..
>
>>> diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
>>> index c4b4fd2..2ea3d7e 100644
>>> --- a/drivers/dma/omap-dma.c
>>> +++ b/drivers/dma/omap-dma.c
>>> @@ -16,6 +16,8 @@
>>> #include <linux/platform_device.h>
>>> #include <linux/slab.h>
>>> #include <linux/spinlock.h>
>>> +#include <linux/of_dma.h>
>>> +#include <linux/of_device.h>
>>>
>>> #include "virt-dma.h"
>>>
>>> @@ -67,6 +69,10 @@ static const unsigned es_bytes[] = {
>>> [OMAP_DMA_DATA_TYPE_S32] = 4,
>>> };
>>>
>>> +static struct of_dma_filter_info omap_dma_info = {
>>> + .filter_fn = omap_dma_filter_fn,
>>> +};
>>> +
>>> static inline struct omap_dmadev *to_omap_dma_dev(struct dma_device *d)
>>> {
>>> return container_of(d, struct omap_dmadev, ddev);
>>> @@ -621,8 +627,22 @@ static int omap_dma_probe(struct platform_device *pdev)
>>> pr_warn("OMAP-DMA: failed to register slave DMA engine device: %d\n",
>>> rc);
>>> omap_dma_free(od);
>>> - } else {
>>> - platform_set_drvdata(pdev, od);
>>> + return rc;
>>> + }
>>> +
>>> + platform_set_drvdata(pdev, od);
>>> +
>>> + if (pdev->dev.of_node) {
>>> + omap_dma_info.dma_cap = od->ddev.cap_mask;
>>> +
>>> + /* Device-tree DMA controller registration */
>>> + rc = of_dma_controller_register(pdev->dev.of_node,
>>> + of_dma_simple_xlate, &omap_dma_info);
>>> + if (rc) {
>>> + pr_warn("OMAP-DMA: failed to register DMA controller\n");
>>> + dma_async_device_unregister(&od->ddev);
>>> + omap_dma_free(od);
>>> + }
>>> }
>>>
>>> dev_info(&pdev->dev, "OMAP DMA engine driver\n");
>>> @@ -634,18 +654,32 @@ static int omap_dma_remove(struct platform_device *pdev)
>>> {
>>> struct omap_dmadev *od = platform_get_drvdata(pdev);
>>>
>>> + if (pdev->dev.of_node)
>>> + of_dma_controller_free(pdev->dev.of_node);
>>> +
>>> dma_async_device_unregister(&od->ddev);
>>> omap_dma_free(od);
>>>
>>> return 0;
>>> }
>>>
>>> +static const struct of_device_id omap_dma_match[] = {
>>> + { .compatible = "ti,omap2420-sdma", },
>>> + { .compatible = "ti,omap2430-sdma", },
>>> + { .compatible = "ti,omap3430-sdma", },
>>> + { .compatible = "ti,omap3630-sdma", },
>>> + { .compatible = "ti,omap4430-sdma", },
>>> + {},
>>> +};
>>> +MODULE_DEVICE_TABLE(of, omap_dma_match);
>>> +
>>> static struct platform_driver omap_dma_driver = {
>>> .probe = omap_dma_probe,
>>> .remove = omap_dma_remove,
>>> .driver = {
>>> .name = "omap-dma-engine",
>>> .owner = THIS_MODULE,
>>> + .of_match_table = of_match_ptr(omap_dma_match),
>>> },
>>> };
>>
>> Who's tree does it make most sense for this patch to go through?
>>
>> Benoit has queued up patch 1/2 and so I am not sure if this should go
>> via Benoit tree to Tony or directly via Vinod's tree. What are your
>> thoughts?
>
> OK
>
>> It would be great if this could make v3.10.
>
> I suggest Vinod/Grant/Linus W queue this patch:
>
> Acked-by: Tony Lindgren <tony at atomide.com>
Can you take this patch with Tony's ACK? Let me know if you want me to
resend with the ACK.
Cheers
Jon
More information about the linux-arm-kernel
mailing list