[GIT PULL 11/15] arm-soc: board specific updates
Arnd Bergmann
arnd at arndb.de
Mon Jul 23 16:33:35 EDT 2012
The following changes since commit 84a1caf1453c3d44050bd22db958af4a7f99315c:
Linux 3.5-rc7 (2012-07-14 15:40:28 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git next/boards
for you to fetch changes up to d003e09891fdc0c170b99328eba7ed004809ef5a:
Merge branch 'next/board-samsung-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/boards (2012-07-21 23:08:03 +0200)
----------------------------------------------------------------
arm-soc: board specific updates
These changes are all for individual board files. In the long run, those
files will largely go away, and the amount of changes appears to be
continuously decreasing, which is a good sign. This time around, changes
are focused on tegra, omap and samsung.
----------------------------------------------------------------
Andy Gross (1):
omap2+: add drm device
Arnd Bergmann (7):
Merge branch 'for-3.6/boards' of git://git.kernel.org/.../swarren/linux-tegra into next/boards
Merge branch 'next/board-samsung' of git://git.kernel.org/.../kgene/linux-samsung into next/boards
Merge tag 'omap-devel-board-for-v3.6' of git://git.kernel.org/.../tmlind/linux-omap into next/boards
Merge branch 'next/board-samsung-2' of git://git.kernel.org/.../kgene/linux-samsung into next/boards
Merge tag 'v3.5-rc7' into next/boards
Merge branch 'next/board-samsung-3' of git://git.kernel.org/.../kgene/linux-samsung into next/boards
Merge branch 'next/boards' into for-next
Dimitris Papastamos (1):
ARM: S3C64XX: Add IRQ mapping for wm0010 on Cragganmore
Dmitry Lifshitz (2):
ARM: OMAP3: cm-t35: add mt9t001 camera sensor support
ARM: OMAP3: cm-t35: add tvp5150 decoder support
Kukjin Kim (3):
Merge branch 'next/board-samsung' into next/board-samsung-2
Merge branch 'next/board-samsung-2' into next/board-samsung-3
ARM: SAMSUNG: no need to set the value for clk_xusbxti when it is 24Mhz
Laxman Dewangan (1):
ARM: tegra: add device tree AUXDATA for APBDMA
Mark Brown (7):
ARM: S3C64XX: Add module identification for Balblair Cragganmore module
ARM: S3C64XX: Add WM5102 EVM to Cragganmore modules
ARM: S3C64XX: Dynamically allocate the IRQ range for WM8994 on Cragganmore
ARM: S3C64XX: Dynamically assign interrupts for CPU PMIC on Cragganmore
ARM: S3C64XX: Don't specify an irq_base for WM1192-EV1 board
ARM: S3C64XX: Clean up after SPI driver platform data updates
ARM: S3C64XX: Mark most Cragganmore initdata devinitdata
Peter Ujfalusi (2):
ARM: OMAP: board-4430sdp: MUX configuration for sys_nirq2
ARM: OMAP: board-omap4panda: MUX configuration for sys_nirq2
Ricardo Salveti de Araujo (1):
ARM: EXYNOS: Add leds status1 and status2 on Origen board
Sachin Kamat (11):
ARM: EXYNOS: Add HSOTG support to Origen
ARM: EXYNOS: Add HSOTG support to SMDKV310
ARM: EXYNOS: Update keypad entries for SMDK4X12
ARM: S5PV210: Add HSOTG support to SMDKV210
ARM: EXYNOS: Add audio platform device in SMDKV310 board
ARM: S5PV210: Add audio platform device in Aquila board
ARM: S5PV210: Add audio platform device in Goni board
ARM: EXYNOS: Add HSOTG support to SMDK4X12
ARM: EXYNOS: Add framebuffer support for SMDK4X12
ARM: EXYNOS: Add DRM device to SMDK4X12 board
ARM: EXYNOS: Add missing .reserve field to SMDKC210
Stephen Warren (7):
ARM: tegra: make .dts compilation depend on Tegra2 support
ARM: tegra: remove CONFIG_MACH_TEGRA_DT
ARM: tegra: remove Seaboard board files
ARM: tegra: trimslice: enable PCIe when booting from device tree
ARM: tegra: harmony: init regulators, PCIe when booting from DT
ARM: tegra: paz00: enable WiFi rfkill when booting from device tree
ARM: tegra: use of_default_bus_match_table
Tony Lindgren (1):
ARM: OMAP3: Fix omap3evm randconfig error introduced by VBUS support
Zumeng Chen (4):
ARM: OMAP3EVM: Add NAND flash definition
ARM: OMAP3EVM: Adding USB internal LDOs board file
ARM: omap3evm: enable VBUS switch for EHCI tranceiver
ARM: OMAP3530evm: set pendown_state and debounce time for ads7846
arch/arm/Kconfig | 1 +
arch/arm/mach-exynos/Kconfig | 7 +
arch/arm/mach-exynos/mach-nuri.c | 3 +-
arch/arm/mach-exynos/mach-origen.c | 39 ++-
arch/arm/mach-exynos/mach-smdk4x12.c | 83 +++++-
arch/arm/mach-exynos/mach-smdkv310.c | 17 +-
arch/arm/mach-exynos/mach-universal_c210.c | 3 +-
arch/arm/mach-omap2/Makefile | 4 +
arch/arm/mach-omap2/board-4430sdp.c | 3 +
arch/arm/mach-omap2/board-cm-t35.c | 89 ++++++
arch/arm/mach-omap2/board-omap3evm.c | 78 ++++-
arch/arm/mach-omap2/board-omap4panda.c | 3 +
arch/arm/mach-omap2/common-board-devices.c | 11 +
arch/arm/mach-omap2/common-board-devices.h | 1 +
arch/arm/mach-omap2/drm.c | 61 ++++
arch/arm/mach-s3c64xx/include/mach/crag6410.h | 4 +-
arch/arm/mach-s3c64xx/mach-crag6410-module.c | 11 +-
arch/arm/mach-s3c64xx/mach-crag6410.c | 69 +++--
arch/arm/mach-s3c64xx/mach-smdk6410.c | 1 -
arch/arm/mach-s5pv210/Kconfig | 2 +
arch/arm/mach-s5pv210/mach-aquila.c | 7 +
arch/arm/mach-s5pv210/mach-goni.c | 11 +-
arch/arm/mach-s5pv210/mach-smdkv210.c | 10 +-
arch/arm/mach-tegra/Kconfig | 36 ---
arch/arm/mach-tegra/Makefile | 13 +-
arch/arm/mach-tegra/Makefile.boot | 10 +-
arch/arm/mach-tegra/board-dt-tegra20.c | 74 ++++-
arch/arm/mach-tegra/board-dt-tegra30.c | 8 +-
arch/arm/mach-tegra/board-harmony-pcie.c | 15 +-
arch/arm/mach-tegra/board-harmony-power.c | 25 +-
arch/arm/mach-tegra/board-paz00.c | 7 +-
arch/arm/mach-tegra/board-seaboard-pinmux.c | 197 -------------
arch/arm/mach-tegra/board-seaboard.c | 306 --------------------
arch/arm/mach-tegra/board-seaboard.h | 47 ---
arch/arm/mach-tegra/board.h | 9 +
drivers/staging/omapdrm/omap_drv.h | 2 +-
.../linux/platform_data/omap_drm.h | 19 +-
37 files changed, 593 insertions(+), 693 deletions(-)
More information about the linux-arm-kernel
mailing list