[GIT PULL 14/15] arm-soc: power management changes
Arnd Bergmann
arnd at arndb.de
Mon Jul 23 16:33:22 EDT 2012
The following changes since commit 6b16351acbd415e66ba16bf7d473ece1574cf0bc:
Linux 3.5-rc4 (2012-06-24 12:53:04 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git next/pm
for you to fetch changes up to 6b21a9ce0402e0c5fd2adfa3d41328fdd8f55a9a:
Merge tag 'omap-devel-pm-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/pm (2012-07-03 22:02:17 +0200)
----------------------------------------------------------------
arm-soc: power management changes
These are various power management related changes, mainly concerning
cpuidle on i.MX and OMAP, as well as a the move of the omap smartreflex
driver to live in the power subsystem.
----------------------------------------------------------------
Arnd Bergmann (3):
Merge tag 'omap-devel-driver-for-v3.6' of git://git.kernel.org/.../tmlind/linux-omap into next/pm
Merge tag 'omap-devel-pm-for-v3.6' of git://git.kernel.org/.../tmlind/linux-omap into next/pm
Merge branch 'next/pm' into for-next
J Keerthy (1):
ARM: OMAP2+: Voltage: Move the omap_volt_data structure to plat
Jean Pihet (13):
ARM: OMAP2+: SmartReflex: move the smartreflex header to include/linux/power
ARM: OMAP3+: SmartReflex: class drivers should use struct omap_sr *
ARM: OMAP2+: smartreflex: Use the names from hwmod data instead of voltage domains.
ARM: OMAP3: hwmod: rename the smartreflex entries
ARM: OMAP2+: SmartReflex: introduce a busy loop condition test macro
ARM: OMAP2+: SmartReflex: Use per-OPP data structure
ARM: OMAP2+: SmartReflex: Create per-opp debugfs node for errminlimit
ARM: OMAP2+: SmartReflex: add POWER_AVS Kconfig options
ARM: OMAP: SmartReflex: Move smartreflex driver to drivers/
ARM: OMAP3: PM: cpuidle: default to C1 in next_valid_state
ARM: OMAP3: PM: cpuidle: optimize the PER latency in C1 state
ARM: OMAP3: PM: cpuidle: optimize the clkdm idle latency in C1 state
ARM: OMAP2+: do not allow SmartReflex to be built as a module
Kevin Hilman (5):
ARM: OMAP2+: PRM: fix compile for OMAP4-only build
ARM: OMAP2+: powerdomain: allow pre/post transtion to be per pwrdm
ARM: OMAP3: PM: call pre/post transition per powerdomain
ARM: OMAP3: PM: cleanup cam_pwrdm leftovers
ARM: OMAP2+: PM: fix IRQ_NOAUTOEN removal by mis-merge
Mohan V (1):
ARM: OMAP3: PM: correct enable/disable of daisy io chain
Olof Johansson (1):
Merge branch 'imx/cpuidle' into next/pm
Paul Walmsley (4):
W1: OMAP HDQ1W: allow driver to be built on all OMAP2+
W1: OMAP HDQ1W: use 32-bit register accesses
ARM: OMAP2+: HDQ1W: use omap_device
W1: OMAP HDQ1W: use runtime PM
Rajendra Nayak (1):
ARM: OMAP4: PRM: Add IO Daisychain support
Robert Lee (7):
ARM: imx: Modify IMX_IO_P2V macro
ARM: imx: Add comments to tzic_enable_waker()
ARM: imx: clean and consolidate imx5 suspend and idle code
ARM: imx: Enable imx53 low power idle
ARM: imx: Add common imx cpuidle init functionality.
ARM: imx: Add imx5 cpuidle
ARM: imx: Add imx6q cpuidle driver
Tero Kristo (1):
ARM: OMAP3+: PRM: Enable IO wake up
Tony Lindgren (5):
Merge tag 'omap-devel-b-for-3.6' of git://git.kernel.org/.../pjw/omap-pending into devel-driver
Merge tag 'omap-devel-c-for-3.6' of git://git.kernel.org/.../pjw/omap-pending into devel-pm
ARM: OMAP2: Use hwmod to initialize mmc for 2420
Merge branch 'for_3.6/pm/sr-move' of git://git.kernel.org/.../khilman/linux-omap-pm into devel-driver
Merge branch 'for_3.6/pm/performance' of git://git.kernel.org/.../khilman/linux-omap-pm into devel-pm
Vishwanath BS (3):
ARM: OMAP3: PM: Move IO Daisychain function to omap3 prm file
ARM: OMAP3PLUS: hwmod: reconfigure IO Daisychain during hwmod mux
ARM: OMAP3: PM: Remove IO Daisychain control from cpuidle
arch/arm/mach-imx/clk-imx51-imx53.c | 2 +-
arch/arm/mach-imx/imx53-dt.c | 1 +
arch/arm/mach-imx/mach-imx6q.c | 19 +++
arch/arm/mach-imx/mach-mx53_ard.c | 1 +
arch/arm/mach-imx/mach-mx53_evk.c | 1 +
arch/arm/mach-imx/mach-mx53_loco.c | 1 +
arch/arm/mach-imx/mach-mx53_smd.c | 1 +
arch/arm/mach-imx/mm-imx5.c | 26 +---
arch/arm/mach-imx/pm-imx5.c | 111 ++++++++++----
arch/arm/mach-omap2/Makefile | 5 +-
arch/arm/mach-omap2/cpuidle34xx.c | 71 ++++-----
arch/arm/mach-omap2/devices.c | 108 -------------
arch/arm/mach-omap2/hdq1w.c | 26 ++++
arch/arm/mach-omap2/msdi.c | 73 +++++++++
arch/arm/mach-omap2/omap-mpuss-lowpower.c | 4 +-
arch/arm/mach-omap2/omap_hwmod.c | 38 ++++-
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 12 +-
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 3 +-
arch/arm/mach-omap2/pm.h | 2 +-
arch/arm/mach-omap2/pm34xx.c | 63 ++------
arch/arm/mach-omap2/powerdomain.c | 16 +-
arch/arm/mach-omap2/powerdomain.h | 4 +-
arch/arm/mach-omap2/prcm-common.h | 8 +
arch/arm/mach-omap2/prm2xxx_3xxx.c | 48 ++++++
arch/arm/mach-omap2/prm2xxx_3xxx.h | 2 +
arch/arm/mach-omap2/prm44xx.c | 63 +++++++-
arch/arm/mach-omap2/prm44xx.h | 2 +
arch/arm/mach-omap2/smartreflex-class3.c | 29 ++--
arch/arm/mach-omap2/sr_device.c | 39 ++++-
arch/arm/mach-omap2/voltage.h | 21 +--
arch/arm/plat-mxc/Makefile | 1 +
arch/arm/plat-mxc/cpuidle.c | 80 ++++++++++
arch/arm/plat-mxc/include/mach/common.h | 6 +-
arch/arm/plat-mxc/include/mach/cpuidle.h | 22 +++
arch/arm/plat-mxc/include/mach/hardware.h | 25 +--
arch/arm/plat-mxc/tzic.c | 4 +
arch/arm/plat-omap/Kconfig | 31 ++--
arch/arm/plat-omap/include/plat/voltage.h | 21 ++-
drivers/power/Kconfig | 2 +
drivers/power/Makefile | 1 +
drivers/power/avs/Kconfig | 12 ++
drivers/power/avs/Makefile | 1 +
.../mach-omap2 => drivers/power/avs}/smartreflex.c | 161 ++++++++------------
drivers/w1/masters/Kconfig | 2 +-
drivers/w1/masters/omap_hdq.c | 86 +++--------
.../linux/power}/smartreflex.h | 74 +++++++--
46 files changed, 808 insertions(+), 521 deletions(-)
More information about the linux-arm-kernel
mailing list