[PATCH 12/19] ARM: ux500: Remove platform registration of MSP devices

Lee Jones lee.jones at linaro.org
Tue Jul 31 09:39:06 EDT 2012


This patch removes platform device registration of all 4 MSP
devices. It also takes care of all redundant infrastructure now
that each of the ux500 audio components have been Device Tree
enabled.

Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 arch/arm/mach-ux500/board-mop500-msp.c |   14 --------------
 arch/arm/mach-ux500/board-mop500.c     |    2 --
 arch/arm/mach-ux500/board-mop500.h     |    2 --
 3 files changed, 18 deletions(-)

diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c
index 7af2dce..19473f7 100644
--- a/arch/arm/mach-ux500/board-mop500-msp.c
+++ b/arch/arm/mach-ux500/board-mop500-msp.c
@@ -172,20 +172,6 @@ struct msp_i2s_platform_data msp3_platform_data = {
 	.msp_i2s_dma_tx	= NULL,
 };
 
-/* Due for removal once the MSP driver has been fully DT:ed. */
-void mop500_of_msp_init(struct device *parent)
-{
-	pr_info("Initialize MSP I2S-devices.\n");
-	db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,
-			   &msp0_platform_data);
-	db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
-			   &msp1_platform_data);
-	db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2,
-			   &msp2_platform_data);
-	db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1,
-			   &msp3_platform_data);
-}
-
 void mop500_msp_init(struct device *parent)
 {
 	pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__);
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index d455a61..2ef26c8 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -810,8 +810,6 @@ static void __init u8500_init_machine(void)
 
 		mop500_uib_init();
 
-	} else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
-		mop500_of_msp_init(parent);
 	} else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
 		/*
 		 * The HREFv60 board removed a GPIO expander and routed
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index 3fbf48f..e56c983 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -98,8 +98,6 @@ void __init mop500_pinmaps_init(void);
 void __init snowball_pinmaps_init(void);
 void __init hrefv60_pinmaps_init(void);
 void mop500_msp_init(struct device *parent);
-/* Due for removal once the MSP driver has been fully DT:ed. */
-void mop500_of_msp_init(struct device *parent);
 
 int __init mop500_uib_init(void);
 void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
-- 
1.7.9.5




More information about the linux-arm-kernel mailing list