[PATCH 2/2] ARM: mx28: Fix registers range
Fabio Estevam
festevam at gmail.com
Mon Jul 30 20:29:19 EDT 2012
From: Fabio Estevam <fabio.estevam at freescale.com>
Fix registers range.
Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
arch/arm/boot/dts/imx28.dtsi | 74 +++++++++++++++++++++---------------------
1 files changed, 37 insertions(+), 37 deletions(-)
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 787efac..3fa6d19 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -57,18 +57,18 @@
};
hsadc at 80002000 {
- reg = <0x80002000 2000>;
+ reg = <0x80002000 0x2000>;
interrupts = <13 87>;
status = "disabled";
};
dma-apbh at 80004000 {
compatible = "fsl,imx28-dma-apbh";
- reg = <0x80004000 2000>;
+ reg = <0x80004000 0x2000>;
};
perfmon at 80006000 {
- reg = <0x80006000 800>;
+ reg = <0x80006000 0x800>;
interrupts = <27>;
status = "disabled";
};
@@ -77,7 +77,7 @@
compatible = "fsl,imx28-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
- reg = <0x8000c000 2000>, <0x8000a000 2000>;
+ reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
reg-names = "gpmi-nand", "bch";
interrupts = <88>, <41>;
interrupt-names = "gpmi-dma", "bch";
@@ -86,28 +86,28 @@
};
ssp0: ssp at 80010000 {
- reg = <0x80010000 2000>;
+ reg = <0x80010000 0x2000>;
interrupts = <96 82>;
fsl,ssp-dma-channel = <0>;
status = "disabled";
};
ssp1: ssp at 80012000 {
- reg = <0x80012000 2000>;
+ reg = <0x80012000 0x2000>;
interrupts = <97 83>;
fsl,ssp-dma-channel = <1>;
status = "disabled";
};
ssp2: ssp at 80014000 {
- reg = <0x80014000 2000>;
+ reg = <0x80014000 0x2000>;
interrupts = <98 84>;
fsl,ssp-dma-channel = <2>;
status = "disabled";
};
ssp3: ssp at 80016000 {
- reg = <0x80016000 2000>;
+ reg = <0x80016000 0x2000>;
interrupts = <99 85>;
fsl,ssp-dma-channel = <3>;
status = "disabled";
@@ -117,7 +117,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-pinctrl", "simple-bus";
- reg = <0x80018000 2000>;
+ reg = <0x80018000 0x2000>;
gpio0: gpio at 0 {
compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
@@ -510,96 +510,96 @@
};
digctl at 8001c000 {
- reg = <0x8001c000 2000>;
+ reg = <0x8001c000 0x2000>;
interrupts = <89>;
status = "disabled";
};
etm at 80022000 {
- reg = <0x80022000 2000>;
+ reg = <0x80022000 0x2000>;
status = "disabled";
};
dma-apbx at 80024000 {
compatible = "fsl,imx28-dma-apbx";
- reg = <0x80024000 2000>;
+ reg = <0x80024000 0x2000>;
};
dcp at 80028000 {
- reg = <0x80028000 2000>;
+ reg = <0x80028000 0x2000>;
interrupts = <52 53 54>;
status = "disabled";
};
pxp at 8002a000 {
- reg = <0x8002a000 2000>;
+ reg = <0x8002a000 0x2000>;
interrupts = <39>;
status = "disabled";
};
ocotp at 8002c000 {
- reg = <0x8002c000 2000>;
+ reg = <0x8002c000 0x2000>;
status = "disabled";
};
axi-ahb at 8002e000 {
- reg = <0x8002e000 2000>;
+ reg = <0x8002e000 0x2000>;
status = "disabled";
};
lcdif at 80030000 {
compatible = "fsl,imx28-lcdif";
- reg = <0x80030000 2000>;
+ reg = <0x80030000 0x2000>;
interrupts = <38 86>;
status = "disabled";
};
can0: can at 80032000 {
compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
- reg = <0x80032000 2000>;
+ reg = <0x80032000 0x2000>;
interrupts = <8>;
status = "disabled";
};
can1: can at 80034000 {
compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
- reg = <0x80034000 2000>;
+ reg = <0x80034000 0x2000>;
interrupts = <9>;
status = "disabled";
};
simdbg at 8003c000 {
- reg = <0x8003c000 200>;
+ reg = <0x8003c000 0x200>;
status = "disabled";
};
simgpmisel at 8003c200 {
- reg = <0x8003c200 100>;
+ reg = <0x8003c200 0x100>;
status = "disabled";
};
simsspsel at 8003c300 {
- reg = <0x8003c300 100>;
+ reg = <0x8003c300 0x100>;
status = "disabled";
};
simmemsel at 8003c400 {
- reg = <0x8003c400 100>;
+ reg = <0x8003c400 0x100>;
status = "disabled";
};
gpiomon at 8003c500 {
- reg = <0x8003c500 100>;
+ reg = <0x8003c500 0x100>;
status = "disabled";
};
simenet at 8003c700 {
- reg = <0x8003c700 100>;
+ reg = <0x8003c700 0x100>;
status = "disabled";
};
armjtag at 8003c800 {
- reg = <0x8003c800 100>;
+ reg = <0x8003c800 0x100>;
status = "disabled";
};
};
@@ -612,45 +612,45 @@
ranges;
clkctl at 80040000 {
- reg = <0x80040000 2000>;
+ reg = <0x80040000 0x2000>;
status = "disabled";
};
saif0: saif at 80042000 {
compatible = "fsl,imx28-saif";
- reg = <0x80042000 2000>;
+ reg = <0x80042000 0x2000>;
interrupts = <59 80>;
fsl,saif-dma-channel = <4>;
status = "disabled";
};
power at 80044000 {
- reg = <0x80044000 2000>;
+ reg = <0x80044000 0x2000>;
status = "disabled";
};
saif1: saif at 80046000 {
compatible = "fsl,imx28-saif";
- reg = <0x80046000 2000>;
+ reg = <0x80046000 0x2000>;
interrupts = <58 81>;
fsl,saif-dma-channel = <5>;
status = "disabled";
};
lradc at 80050000 {
- reg = <0x80050000 2000>;
+ reg = <0x80050000 0x2000>;
status = "disabled";
};
spdif at 80054000 {
- reg = <0x80054000 2000>;
+ reg = <0x80054000 0x2000>;
interrupts = <45 66>;
status = "disabled";
};
rtc at 80056000 {
compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
- reg = <0x80056000 2000>;
+ reg = <0x80056000 0x2000>;
interrupts = <29>;
};
@@ -658,7 +658,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-i2c";
- reg = <0x80058000 2000>;
+ reg = <0x80058000 0x2000>;
interrupts = <111 68>;
clock-frequency = <100000>;
status = "disabled";
@@ -668,7 +668,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-i2c";
- reg = <0x8005a000 2000>;
+ reg = <0x8005a000 0x2000>;
interrupts = <110 69>;
clock-frequency = <100000>;
status = "disabled";
@@ -676,14 +676,14 @@
pwm: pwm at 80064000 {
compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
- reg = <0x80064000 2000>;
+ reg = <0x80064000 0x2000>;
#pwm-cells = <2>;
fsl,pwm-number = <8>;
status = "disabled";
};
timrot at 80068000 {
- reg = <0x80068000 2000>;
+ reg = <0x80068000 0x2000>;
status = "disabled";
};
--
1.7.1
More information about the linux-arm-kernel
mailing list