[PATCH] ARM: OMAP2+: ads7846 init: fix fault caused by freeing pen-down GPIO

Kevin Hilman khilman at ti.com
Fri Jul 27 13:46:17 EDT 2012


Igor Grinberg <grinberg at compulab.co.il> writes:

> On 07/26/12 22:30, Kevin Hilman wrote:
>> + Zumeng Chen
>> 
>> Igor Grinberg <grinberg at compulab.co.il> writes:
>> 
>>> Hi Kevin,
>>>
>>> I've just noticed that the patch has been modified by Arnd in a way
>>> that of course will trigger GPIO use without being requested.
>>> I'm sorry, I was not available by that time Arnd changed the patch.
>> 
>> Your right, your original patch isn't the problem.  I found the root
>> cause.
>> 
>> The real problem is actually introduced by the merge of your patch from
>> the arm-soc/cleanup branch, and this one from Zumeng Chen: commit
>> 16aced80f6 (ARM: OMAP3530evm: set pendown_state and debounce time for
>> ads7846) from the arm-soc/boards branch.
>> 
>> However, looking closer at the one from Zumeng, that one is clearly not
>> right.  It unconditionally adds a *board-specific* ->get_pendown_state
>> function to the pdata that is common to *all* boards.  That's just wrong
>> and has the side-effect of making ->get_pendown_state() wrong on every
>> board except the OMAP3EVM.  Oops.
>
> Argh... that should not be applied in first place...

Agreed, but it's already in mainline.

> I double sorry, I was not available when that conflict was resolved...
> The right resolution would be just to revert the 16aced80f6
> (ARM: OMAP3530evm: set pendown_state and debounce time for ads7846),
> but who cares now...


>
>> 
>> So, IMO, in addition to $SUBJECT patch, in order to get the touchscreen
>> GPIO working on non OMAP3EVM boards, we also need something like this as
>> well.
>> 
>> Igor, Zumeng, could you try this out on your boards anc confirm if it's
>> working?  I currently don't have a board setup with a touchscreen in my
>> board farm.
>
> Since you have already dig into this, which branch would be good for testing?


git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git for_3.6/fixes/ads7846

I just pushed this out, so it might take a bit to propagate to all the
mirrors.

Kevin



More information about the linux-arm-kernel mailing list