[PATCH v2 1/3] mtd: nand: Include IMX6 in the list of supported SoCs

[Richard Zhao]

On Wed, Jul 25, 2012 at 08:18:18AM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
> 
> Include IMX6 in the list of supported SoCs.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
> Changes since v1:
> - No changes
>  drivers/mtd/nand/Kconfig |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
> index f4e81a7..b40e172 100644
> --- a/drivers/mtd/nand/Kconfig
> +++ b/drivers/mtd/nand/Kconfig
> @@ -464,7 +464,7 @@ config MTD_NAND_GPMI_NAND
>          bool "GPMI NAND Flash Controller driver"
>          depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q)
We don't need to list all SoCs. Shall we just check MXC or MXS ?

Thanks
Richard
>          help
> -	 Enables NAND Flash support for IMX23 or IMX28.
> +	 Enables NAND Flash support for IMX23, IMX28 or IMX6.
>  	 The GPMI controller is very powerful, with the help of BCH
>  	 module, it can do the hardware ECC. The GPMI supports several
>  	 NAND flashs at the same time. The GPMI may conflicts with other
> -- 
> 1.7.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>