[PATCH] ARM: OMAP2+: ads7846 init: fix fault caused by freeing pen-down GPIO

[Kevin Hilman]

+ Zumeng Chen

Igor Grinberg <grinberg at compulab.co.il> writes:

> Hi Kevin,
>
> I've just noticed that the patch has been modified by Arnd in a way
> that of course will trigger GPIO use without being requested.
> I'm sorry, I was not available by that time Arnd changed the patch.

Your right, your original patch isn't the problem.  I found the root
cause.

The real problem is actually introduced by the merge of your patch from
the arm-soc/cleanup branch, and this one from Zumeng Chen: commit
16aced80f6 (ARM: OMAP3530evm: set pendown_state and debounce time for
ads7846) from the arm-soc/boards branch.

However, looking closer at the one from Zumeng, that one is clearly not
right.  It unconditionally adds a *board-specific* ->get_pendown_state
function to the pdata that is common to *all* boards.  That's just wrong
and has the side-effect of making ->get_pendown_state() wrong on every
board except the OMAP3EVM.  Oops.

So, IMO, in addition to $SUBJECT patch, in order to get the touchscreen
GPIO working on non OMAP3EVM boards, we also need something like this as
well.

Igor, Zumeng, could you try this out on your boards anc confirm if it's
working?  I currently don't have a board setup with a touchscreen in my
board farm.

Kevin

>From 85516c6a3354967caf4cff434d28c3001cd411eb Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman at ti.com>
Date: Thu, 26 Jul 2012 12:15:38 -0700
Subject: [PATCH 2/2] ARM: OMAP2+: ads7846: fix ->get_pendown_state() to work
 on all boards

commit 16aced80f6 (ARM: OMAP3530evm: set pendown_state and debounce
time for ads7846) introduced a common ->get_pendown_state() function
into the generic code, but that function was board-specific for the
OMAP3EVM.

Fix this up to work for all boards that pass in a pendown GPIO.

Cc: Zumeng Chen <zumeng.chen at windriver.com>
Cc: Igor Grinberg <grinberg at compulab.co.il>
Signed-off-by: Kevin Hilman <khilman at ti.com>
---
 arch/arm/mach-omap2/board-omap3evm.c       |    1 +
 arch/arm/mach-omap2/common-board-devices.c |    4 +++-
 arch/arm/mach-omap2/common-board-devices.h |    1 -
 3 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index ef230a0..0d362e9 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -58,6 +58,7 @@
 #include "hsmmc.h"
 #include "common-board-devices.h"
 
+#define OMAP3_EVM_TS_GPIO	175
 #define OMAP3_EVM_EHCI_VBUS	22
 #define OMAP3_EVM_EHCI_SELECT	61
 
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index 0fee95f..06f176f 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -40,9 +40,10 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = {
  * of pdata->get_pendown_state, but we have done this. So set
  * get_pendown_state to avoid twice gpio requesting.
  */
+static int omap3_gpio_pendown;
 static int omap3_get_pendown_state(void)
 {
-	return !gpio_get_value(OMAP3_EVM_TS_GPIO);
+	return !gpio_get_value(omap3_gpio_pendown);
 }
 
 static struct ads7846_platform_data ads7846_config = {
@@ -74,6 +75,7 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
 	struct spi_board_info *spi_bi = &ads7846_spi_board_info;
 	int err;
 
+	omap3_gpio_pendown = gpio_pendown;
 	err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
 	if (err) {
 		pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index 4c4ef6a..a0b4a428 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -4,7 +4,6 @@
 #include "twl-common.h"
 
 #define NAND_BLOCK_SIZE	SZ_128K
-#define OMAP3_EVM_TS_GPIO	175
 
 struct mtd_partition;
 struct ads7846_platform_data;
-- 
1.7.9.2