[PATCH 09/10 RESEND] spi: Add SSP/SPI device tree documentation
Marek Vasut
marex at denx.de
Tue Jul 24 15:43:48 EDT 2012
Dear Sergei Shtylyov,
> Hello.
>
> On 07/24/2012 12:40 AM, Marek Vasut wrote:
> > Signed-off-by: Marek Vasut <marex at denx.de>
> > Cc: Attila Kinali <attila at kinali.ch>
> > Cc: Chris Ball <cjb at laptop.org>
> > CC: Dong Aisheng <b29396 at freescale.com>
> > Cc: Fabio Estevam <fabio.estevam at freescale.com>
> > Cc: Grant Likely <grant.likely at secretlab.ca>
> > Cc: Linux ARM kernel <linux-arm-kernel at lists.infradead.org>
> > Cc: Mark Brown <broonie at opensource.wolfsonmicro.com>
> > CC: Shawn Guo <shawn.guo at linaro.org>
> > ---
> >
> > Documentation/devicetree/bindings/spi/mxs-spi.txt | 18
> > ++++++++++++++++++ 1 file changed, 18 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/spi/mxs-spi.txt
> >
> > diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.txt
> > b/Documentation/devicetree/bindings/spi/mxs-spi.txt new file mode 100644
> > index 0000000..f1263a9
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/spi/mxs-spi.txt
> > @@ -0,0 +1,18 @@
> > +* Freescale MX233/MX28 SSP/SPI
> > +
> > +Required properties:
> > +- compatible: Should be "fsl,<soc>-spi", where soc is "imx23" or "imx28"
> > +- reg: Offset and length of the register set for the device
> > +- interrupts: Should contain SSP interrupts (error irq first, dma irq
> > second) +- fsl,ssp-dma-channel: APBX DMA channel for the SSP
> > +
> > +Example:
> > +
> > +ssp0: ssp at 80010000 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + compatible = "fsl,imx28-spi";
> > + reg = <0x80010000 2000>;
>
> Not 0x2000?
This is actually not the first place I was curious about in the imx28 DTS ...
yes, the size is 0x2000, but "2000" as is is used in multiple places across
imx28. Shawn?
> WBR, Sergei
Best regards,
Marek Vasut
More information about the linux-arm-kernel
mailing list