[PATCH 09/10 RESEND] spi: Add SSP/SPI device tree documentation

[Marek Vasut]

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Attila Kinali <attila at kinali.ch>
Cc: Chris Ball <cjb at laptop.org>
CC: Dong Aisheng <b29396 at freescale.com>
Cc: Fabio Estevam <fabio.estevam at freescale.com>
Cc: Grant Likely <grant.likely at secretlab.ca>
Cc: Linux ARM kernel <linux-arm-kernel at lists.infradead.org>
Cc: Mark Brown <broonie at opensource.wolfsonmicro.com>
CC: Shawn Guo <shawn.guo at linaro.org>
---
 Documentation/devicetree/bindings/spi/mxs-spi.txt |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/mxs-spi.txt

diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.txt b/Documentation/devicetree/bindings/spi/mxs-spi.txt
new file mode 100644
index 0000000..f1263a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/mxs-spi.txt
@@ -0,0 +1,18 @@
+* Freescale MX233/MX28 SSP/SPI
+
+Required properties:
+- compatible: Should be "fsl,<soc>-spi", where soc is "imx23" or "imx28"
+- reg: Offset and length of the register set for the device
+- interrupts: Should contain SSP interrupts (error irq first, dma irq second)
+- fsl,ssp-dma-channel: APBX DMA channel for the SSP
+
+Example:
+
+ssp0: ssp at 80010000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	reg = <0x80010000 2000>;
+	interrupts = <96 82>;
+	fsl,ssp-dma-channel = <0>;
+};
-- 
1.7.10.4