[PATCH v2 1/2] USB: chipidea: add imx usbmisc support

Felipe Balbi balbi at ti.com
Mon Jul 23 05:16:53 EDT 2012


Hi,

On Wed, Jul 18, 2012 at 06:29:06PM +0800, Richard Zhao wrote:
> i.MX usb controllers shares non-core registers, which may include
> SoC specific controls. We take it as a usbmisc device and usbmisc
> driver set operations needed by ci13xxx_imx driver.
> 
> For example, Sabrelite board has bad over-current design, we can
> usbmisc to disable over-current detect.
> 
> Signed-off-by: Richard Zhao <richard.zhao at freescale.com>
> ---
>  .../devicetree/bindings/usb/ci13xxx-imx.txt        |    2 +
>  .../devicetree/bindings/usb/usbmisc-imx.txt        |   12 ++
>  drivers/usb/chipidea/Makefile                      |    2 +-
>  drivers/usb/chipidea/ci13xxx_imx.c                 |   23 +++
>  drivers/usb/chipidea/usbmisc_imx6q.c               |  161 ++++++++++++++++++++
>  5 files changed, 199 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/usb/usbmisc-imx.txt
>  create mode 100644 drivers/usb/chipidea/usbmisc_imx6q.c
> 
> diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> index 2c29041..06105ce 100644
> --- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> +++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> @@ -8,6 +8,7 @@ Required properties:
>  Optional properties:
>  - fsl,usbphy: phandler of usb phy that connects to the only one port
>  - vbus-supply: regulator for vbus
> +- disable-over-current: disable over current detect
>  
>  Examples:
>  usb at 02184000 { /* USB OTG */
> @@ -15,4 +16,5 @@ usb at 02184000 { /* USB OTG */
>  	reg = <0x02184000 0x200>;
>  	interrupts = <0 43 0x04>;
>  	fsl,usbphy = <&usbphy1>;
> +	disable-over-current;
>  };
> diff --git a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
> new file mode 100644
> index 0000000..4fa500d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
> @@ -0,0 +1,12 @@
> +* Freescale i.MX non-core registers
> +
> +Required properties:
> +- compatible: Should be one of below:
> +	"fsl,imx6q-usbmisc" for imx6q
> +- reg: Should contain registers location and length
> +
> +Examples:
> +usbmisc at 02184800 {
> +	compatible = "fsl,imx6q-usbmisc";
> +	reg = <0x02184800 0x200>;
> +};
> diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
> index 5c66d9c..57e510f 100644
> --- a/drivers/usb/chipidea/Makefile
> +++ b/drivers/usb/chipidea/Makefile
> @@ -15,5 +15,5 @@ ifneq ($(CONFIG_PCI),)
>  endif
>  
>  ifneq ($(CONFIG_OF_DEVICE),)
> -	obj-$(CONFIG_USB_CHIPIDEA)	+= ci13xxx_imx.o
> +	obj-$(CONFIG_USB_CHIPIDEA)	+= ci13xxx_imx.o usbmisc_imx6q.o
>  endif
> diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
> index ef60d06..e790c0e 100644
> --- a/drivers/usb/chipidea/ci13xxx_imx.c
> +++ b/drivers/usb/chipidea/ci13xxx_imx.c
> @@ -22,6 +22,7 @@
>  #include <linux/regulator/consumer.h>
>  
>  #include "ci.h"
> +#include "ci13xxx_imx.h"
>  
>  #define pdev_to_phy(pdev) \
>  	((struct usb_phy *)platform_get_drvdata(pdev))
> @@ -34,6 +35,25 @@ struct ci13xxx_imx_data {
>  	struct regulator *reg_vbus;
>  };
>  
> +static const struct usbmisc_ops *usbmisc_ops;
> +
> +int usbmisc_set_ops(const struct usbmisc_ops *ops)
> +{
> +	if (usbmisc_ops)
> +		return -EBUSY;
> +
> +	usbmisc_ops = ops;
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(usbmisc_set_ops);
> +
> +void usbmisc_unset_ops(const struct usbmisc_ops *ops)
> +{
> +	usbmisc_ops = NULL;
> +}
> +EXPORT_SYMBOL_GPL(usbmisc_unset_ops);
> +
>  static struct ci13xxx_platform_data ci13xxx_imx_platdata __devinitdata  = {
>  	.name			= "ci13xxx_imx",
>  	.flags			= CI13XXX_REQUIRE_TRANSCEIVER |
> @@ -120,6 +140,9 @@ static int __devinit ci13xxx_imx_probe(struct platform_device *pdev)
>  		*pdev->dev.dma_mask = DMA_BIT_MASK(32);
>  		dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask);
>  	}
> +
> +	usbmisc_ops->init(&pdev->dev);
> +
>  	plat_ci = ci13xxx_add_device(&pdev->dev,
>  				pdev->resource, pdev->num_resources,
>  				&ci13xxx_imx_platdata);
> diff --git a/drivers/usb/chipidea/usbmisc_imx6q.c b/drivers/usb/chipidea/usbmisc_imx6q.c
> new file mode 100644
> index 0000000..9f69a8c
> --- /dev/null
> +++ b/drivers/usb/chipidea/usbmisc_imx6q.c
> @@ -0,0 +1,161 @@
> +/*
> + * Copyright 2012 Freescale Semiconductor, Inc.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +
> +#include "ci13xxx_imx.h"
> +
> +#define USB_DEV_MAX 4
> +
> +#define BM_OVER_CUR_DIS		BIT(7)
> +
> +struct imx6q_usbmisc {
> +	void __iomem *base;
> +	struct clk *clk;
> +	struct device *usb_dev[USB_DEV_MAX];
> +	spinlock_t lock;
> +
> +	int disable_oc:USB_DEV_MAX;
> +};
> +
> +static struct imx6q_usbmisc *usbmisc;
> +
> +static int get_index(struct device *dev)
> +{
> +	int i, id = -1;
> +
> +	for (i = 0; i < USB_DEV_MAX; i ++) {
> +		if (usbmisc->usb_dev[i] == dev) {
> +			id = i;
> +			break;
> +		}
> +	}
> +
> +	if (id != -1)
> +		return id;
> +
> +	id = of_alias_get_id(dev->of_node, "usb");
> +	if (id < 0)
> +		dev_err(dev, "failed to get alias id, errno %d\n", id);
> +	return id;
> +}
> +
> +static int usbmisc_imx6q_init(struct device *usb_dev)
> +{
> +
> +	int id;
> +	u32 reg;
> +	struct device_node *usb_np;
> +	unsigned long flags;
> +
> +	id = get_index(usb_dev);
> +	if (id < 0)
> +		return id;
> +
> +	usb_np = usb_dev->of_node;
> +	if (of_find_property(usb_np, "disable-over-current", NULL)) {
> +		spin_lock_irqsave(&usbmisc->lock, flags);
> +		usbmisc->disable_oc |= BIT(id);
> +		reg = readl(usbmisc->base + id * 4);
> +		writel(reg | BM_OVER_CUR_DIS, usbmisc->base + id * 4);
> +		spin_unlock_irqrestore(&usbmisc->lock, flags);
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct usbmisc_ops imx6q_usbmisc_ops = {
> +	.init = usbmisc_imx6q_init,
> +};
> +
> +static const struct of_device_id usbmisc_imx6q_dt_ids[] = {
> +	{ .compatible = "fsl,imx6q-usbmisc"},
> +	{ /* sentinel */ }
> +};
> +
> +static int __devinit usbmisc_imx6q_probe(struct platform_device *pdev)
> +{
> +	struct resource	*res;
> +	struct imx6q_usbmisc *data;
> +	int ret;
> +
> +	if (usbmisc)
> +		return -EBUSY;
> +
> +	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	spin_lock_init(&data->lock);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	data->base = devm_request_and_ioremap(&pdev->dev, res);
> +	if (!data->base)
> +		return -EADDRNOTAVAIL;
> +
> +	data->clk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(data->clk)) {
> +		dev_err(&pdev->dev,
> +			"failed to get clock, err=%ld\n", PTR_ERR(data->clk));
> +		return PTR_ERR(data->clk);
> +	}
> +
> +	ret = clk_prepare_enable(data->clk);
> +	if (ret) {
> +		dev_err(&pdev->dev,
> +			"clk_prepare_enable failed, err=%d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = usbmisc_set_ops(&imx6q_usbmisc_ops);
> +	if (ret)
> +		return ret;
> +
> +	usbmisc = data;
> +
> +	return 0;
> +}
> +
> +static int __devexit usbmisc_imx6q_remove(struct platform_device *pdev)
> +{
> +	usbmisc_unset_ops(&imx6q_usbmisc_ops);
> +	clk_disable_unprepare(usbmisc->clk);
> +	return 0;
> +}
> +
> +static struct platform_driver usbmisc_imx6q_driver = {
> +	.probe = usbmisc_imx6q_probe,
> +	.remove = __devexit_p(usbmisc_imx6q_remove),
> +	.driver = {
> +		.name = "usbmisc_imx6q",
> +		.owner = THIS_MODULE,
> +		.of_match_table = usbmisc_imx6q_dt_ids,
> +	 },
> +};
> +
> +static int __init usbmisc_imx6q_drv_init(void)
> +{
> +	return platform_driver_register(&usbmisc_imx6q_driver);
> +}
> +subsys_initcall(usbmisc_imx6q_drv_init);
> +
> +static void __exit usbmisc_imx6q_drv_exit(void)
> +{
> +	platform_driver_unregister(&usbmisc_imx6q_driver);
> +}
> +module_exit(usbmisc_imx6q_drv_exit);
> +MODULE_ALIAS("platform:usbmisc-imx6q"); MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("i.MX6Q non-core usb register handling");
> +MODULE_AUTHOR("Richard Zhao <richard.zhao at freescale.com>");

This patch looks like a recipe for disaster IMHO, but it's Alex's call.

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120723/a01b6619/attachment-0001.sig>


More information about the linux-arm-kernel mailing list