[PATCH 0/8 v2] EXYNOS5: USB: Add USB 2.0 and USB 3.0 support for exynos5
Vivek Gautam
gautam.vivek at samsung.com
Sat Jul 21 06:32:01 EDT 2012
Changes from v1:
EXYNOS4: USB: Generalising setup-usb-phy driver for exynos
1) Make function exynos_usb_clock_enable() as static.
2) Remove the check for 'usb_clk' in exynos_usb_clock_enable().
ARM: EXYNOS5: Add PHY initialization code for usb 2.0
1) Set HOST_CTRL0_COMMONON_N and reset OTG_SYS_COMMON_ON bits
for host and otg power saving in suspend mode.
Ajay Kumar (2):
ARM: EXYNOS5: Add machine data for USB 2.0
ARM: EXYNOS5: Add OHCI device from device tree
Vivek Gautam (6):
EXYNOS4: USB: Generalising setup-usb-phy driver for exynos
ARM: EXYNOS5: Add EHCI device from device tree
ARM: EXYNOS5: Add PHY initialization code for usb 2.0
ARM: EXYNOS5: Add machine data for USB3.0
ARM: EXYNOS5: Add XHCI device from device tree
ARM: EXYNOS5: Add PHY initialization code for usb 3.0
.../devicetree/bindings/usb/exynos-usb.txt | 60 +++
arch/arm/boot/dts/exynos5250-smdk5250.dts | 4 +
arch/arm/boot/dts/exynos5250.dtsi | 18 +
arch/arm/mach-exynos/Kconfig | 1 +
arch/arm/mach-exynos/clock-exynos5.c | 24 ++
arch/arm/mach-exynos/common.c | 10 +
arch/arm/mach-exynos/include/mach/map.h | 3 +
arch/arm/mach-exynos/include/mach/regs-pmu.h | 4 +
arch/arm/mach-exynos/include/mach/regs-usb-phy.h | 86 ++++
arch/arm/mach-exynos/mach-exynos5-dt.c | 26 ++
arch/arm/mach-exynos/setup-usb-phy.c | 411 ++++++++++++++++++--
arch/arm/plat-samsung/include/plat/map-s5p.h | 2 +
.../include/plat/regs-usb3-exynos-drd-phy.h | 75 ++++
arch/arm/plat-samsung/include/plat/usb-phy.h | 1 +
drivers/usb/Kconfig | 1 +
15 files changed, 693 insertions(+), 33 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/exynos-usb.txt
create mode 100644 arch/arm/plat-samsung/include/plat/regs-usb3-exynos-drd-phy.h
More information about the linux-arm-kernel
mailing list