[PATCH 8/8 v2] ARM: EXYNOS5: Add PHY initialization code for usb 3.0
Vivek Gautam
gautam.vivek at samsung.com
Sat Jul 21 06:32:09 EDT 2012
This patch adds PHY setup functions for usb 3.0 support on exynos5
Signed-off-by: Yulgon Kim <yulgon.kim at samsung.com>
Signed-off-by: Anton Tikhomirov <av.tikhomirov at samsung.com>
Signed-off-by: Vivek Gautam <gautam.vivek at samsung.com>
---
arch/arm/mach-exynos/setup-usb-phy.c | 127 ++++++++++++++++++++
.../include/plat/regs-usb3-exynos-drd-phy.h | 75 ++++++++++++
arch/arm/plat-samsung/include/plat/usb-phy.h | 1 +
3 files changed, 203 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/plat-samsung/include/plat/regs-usb3-exynos-drd-phy.h
diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c
index e6f2f84..b90871d 100644
--- a/arch/arm/mach-exynos/setup-usb-phy.c
+++ b/arch/arm/mach-exynos/setup-usb-phy.c
@@ -18,12 +18,14 @@
#include <mach/regs-usb-phy.h>
#include <plat/cpu.h>
#include <plat/usb-phy.h>
+#include <plat/regs-usb3-exynos-drd-phy.h>
#define PHY_ENABLE 1
#define PHY_DISABLE 0
enum usb_phy_type {
USB_PHY = (0x1 << 0),
+ USB_PHY_DRD = (0x1 << 1),
};
static atomic_t host_usage;
@@ -161,11 +163,44 @@ static int exynos4210_usb_phy_clkset(struct platform_device *pdev)
return phyclk;
}
+static u32 exynos_usb_phy30_set_clock(struct platform_device *pdev)
+{
+ u32 reg, refclk;
+
+ refclk = exynos4210_usb_phy_clkset(pdev);
+ reg = EXYNOS_USB3_PHYCLKRST_REFCLKSEL(3) |
+ EXYNOS_USB3_PHYCLKRST_FSEL(refclk);
+
+ switch (refclk) {
+ case EXYNOS5_CLKSEL_50M:
+ reg |= (EXYNOS_USB3_PHYCLKRST_MPLL_MULTIPLIER(0x02) |
+ EXYNOS_USB3_PHYCLKRST_SSC_REF_CLK_SEL(0x00));
+ break;
+ case EXYNOS5_CLKSEL_20M:
+ reg |= (EXYNOS_USB3_PHYCLKRST_MPLL_MULTIPLIER(0x7d) |
+ EXYNOS_USB3_PHYCLKRST_SSC_REF_CLK_SEL(0x00));
+ break;
+ case EXYNOS5_CLKSEL_19200K:
+ reg |= (EXYNOS_USB3_PHYCLKRST_MPLL_MULTIPLIER(0x02) |
+ EXYNOS_USB3_PHYCLKRST_SSC_REF_CLK_SEL(0x88));
+ break;
+ case EXYNOS5_CLKSEL_24M:
+ default:
+ reg |= (EXYNOS_USB3_PHYCLKRST_MPLL_MULTIPLIER(0x68) |
+ EXYNOS_USB3_PHYCLKRST_SSC_REF_CLK_SEL(0x88));
+ break;
+ }
+
+ return reg;
+}
+
static void exynos_usb_phy_control(enum usb_phy_type phy_type , int on)
{
if (soc_is_exynos5250()) {
if (phy_type & USB_PHY)
writel(on, S5P_USBHOST_PHY_CONTROL);
+ if (phy_type & USB_PHY_DRD)
+ writel(on, S5P_USBDRD_PHY_CONTROL);
}
}
@@ -413,6 +448,88 @@ static int exynos5_usb_phy20_exit(struct platform_device *pdev)
return 0;
}
+static int exynos5_usb_phy30_init(struct platform_device *pdev)
+{
+ struct clk *host_clk;
+ u32 reg;
+
+ host_clk = exynos_usb_clock_enable(pdev);
+ if (host_clk == NULL) {
+ dev_err(&pdev->dev, "Failed to enable USB3.0 host clock this time\n");
+ return -1;
+ }
+
+ exynos_usb_phy_control(USB_PHY_DRD, PHY_ENABLE);
+
+ /* Reset USB 3.0 PHY */
+ writel(0x00000000, EXYNOS_USB3_PHYREG0);
+ writel(0x24d4e6e4, EXYNOS_USB3_PHYPARAM0);
+ writel(0x03fff81c, EXYNOS_USB3_PHYPARAM1);
+ writel(0x00000000, EXYNOS_USB3_PHYRESUME);
+
+ writel(0x08000040, EXYNOS_USB3_LINKSYSTEM);
+ writel(0x00000004, EXYNOS_USB3_PHYBATCHG);
+
+ /* PHYTEST POWERDOWN Control */
+ reg = readl(EXYNOS_USB3_PHYTEST);
+ reg &= ~(EXYNOS_USB3_PHYTEST_POWERDOWN_SSP |
+ EXYNOS_USB3_PHYTEST_POWERDOWN_HSP);
+ writel(reg, EXYNOS_USB3_PHYTEST);
+
+ /* UTMI Power Control */
+ writel(EXYNOS_USB3_PHYUTMI_OTGDISABLE, EXYNOS_USB3_PHYUTMI);
+
+ reg = exynos_usb_phy30_set_clock(pdev);
+
+ reg |= (EXYNOS_USB3_PHYCLKRST_PORTRESET |
+ /* Digital power supply in normal operating mode */
+ EXYNOS_USB3_PHYCLKRST_RETENABLEN |
+ /* Enable ref clock for SS function */
+ EXYNOS_USB3_PHYCLKRST_REF_SSP_EN |
+ /* Enable spread spectrum */
+ EXYNOS_USB3_PHYCLKRST_SSC_EN) |
+ EXYNOS_USB3_PHYCLKRST_COMMONONN;
+ writel(reg, EXYNOS_USB3_PHYCLKRST);
+
+ udelay(10);
+
+ reg &= ~(EXYNOS_USB3_PHYCLKRST_PORTRESET);
+ writel(reg, EXYNOS_USB3_PHYCLKRST);
+
+ clk_disable(host_clk);
+ clk_put(host_clk);
+ return 0;
+}
+
+static int exynos5_usb_phy30_exit(struct platform_device *pdev)
+{
+ struct clk *host_clk;
+ u32 reg;
+
+ host_clk = exynos_usb_clock_enable(pdev);
+ if (host_clk == NULL) {
+ dev_err(&pdev->dev, "Failed to enable USB3.0 host clock this time\n");
+ return -1;
+ }
+
+ reg = EXYNOS_USB3_PHYUTMI_OTGDISABLE |
+ EXYNOS_USB3_PHYUTMI_FORCESUSPEND |
+ EXYNOS_USB3_PHYUTMI_FORCESLEEP;
+ writel(reg, EXYNOS_USB3_PHYUTMI);
+
+ /* Control PHYTEST to remove leakage current */
+ reg = readl(EXYNOS_USB3_PHYTEST);
+ reg |= (EXYNOS_USB3_PHYTEST_POWERDOWN_SSP |
+ EXYNOS_USB3_PHYTEST_POWERDOWN_HSP);
+ writel(reg, EXYNOS_USB3_PHYTEST);
+
+ exynos_usb_phy_control(USB_PHY_DRD, PHY_DISABLE);
+
+ clk_disable(host_clk);
+ clk_put(host_clk);
+ return 0;
+}
+
int s5p_usb_phy_init(struct platform_device *pdev, int type)
{
if (type == S5P_USB_PHY_DEVICE)
@@ -422,6 +539,11 @@ int s5p_usb_phy_init(struct platform_device *pdev, int type)
return exynos5_usb_phy20_init(pdev);
else
return exynos4210_usb_phy1_init(pdev);
+ } else if (type == S5P_USB_PHY_DRD) {
+ if (soc_is_exynos5250())
+ return exynos5_usb_phy30_init(pdev);
+ else
+ dev_err(&pdev->dev, "USB 3.0 DRD not present\n");
}
return -EINVAL;
@@ -436,6 +558,11 @@ int s5p_usb_phy_exit(struct platform_device *pdev, int type)
return exynos5_usb_phy20_exit(pdev);
else
return exynos4210_usb_phy1_exit(pdev);
+ } else if (type == S5P_USB_PHY_DRD) {
+ if (soc_is_exynos5250())
+ return exynos5_usb_phy30_exit(pdev);
+ else
+ dev_err(&pdev->dev, "USB 3.0 DRD not present\n");
}
return -EINVAL;
}
diff --git a/arch/arm/plat-samsung/include/plat/regs-usb3-exynos-drd-phy.h b/arch/arm/plat-samsung/include/plat/regs-usb3-exynos-drd-phy.h
new file mode 100644
index 0000000..8efd5c7
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/regs-usb3-exynos-drd-phy.h
@@ -0,0 +1,75 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co. Ltd
+ *
+ * Exynos SuperSpeed USB 3.0 DRD Controller PHY registers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_SAMSUNG_REGS_USB3_EXYNOS_DRD_PHY_H
+#define __PLAT_SAMSUNG_REGS_USB3_EXYNOS_DRD_PHY_H __FILE__
+
+#define EXYNOS_USB3_PHYREG(x) ((x) + S5P_VA_DRD_PHY)
+
+#define EXYNOS_USB3_LINKSYSTEM EXYNOS_USB3_PHYREG(0x04)
+#define EXYNOS_USB3_PHYUTMI EXYNOS_USB3_PHYREG(0x08)
+
+#define EXYNOS_USB3_PHYUTMI_OTGDISABLE (1 << 6)
+#define EXYNOS_USB3_PHYUTMI_FORCESUSPEND (1 << 1)
+#define EXYNOS_USB3_PHYUTMI_FORCESLEEP (1 << 0)
+
+#define EXYNOS_USB3_PHYPIPE EXYNOS_USB3_PHYREG(0x0C)
+#define EXYNOS_USB3_PHYCLKRST EXYNOS_USB3_PHYREG(0x10)
+
+#define EXYNOS_USB3_PHYCLKRST_SSC_REF_CLK_SEL_MASK (0xff << 23)
+#define EXYNOS_USB3_PHYCLKRST_SSC_REF_CLK_SEL_SHIFT (23)
+#define EXYNOS_USB3_PHYCLKRST_SSC_REF_CLK_SEL_LIMIT (0xff)
+#define EXYNOS_USB3_PHYCLKRST_SSC_REF_CLK_SEL(_x) ((_x) << 23)
+
+#define EXYNOS_USB3_PHYCLKRST_SSC_RANGE_MASK (0x03 << 21)
+#define EXYNOS_USB3_PHYCLKRST_SSC_RANGE_SHIFT (21)
+#define EXYNOS_USB3_PHYCLKRST_SSC_RANGE_LIMIT (0x03)
+#define EXYNOS_USB3_PHYCLKRST_SSC_RANGE(_x) ((_x) << 21)
+
+#define EXYNOS_USB3_PHYCLKRST_SSC_EN (1 << 20)
+#define EXYNOS_USB3_PHYCLKRST_REF_SSP_EN (1 << 19)
+#define EXYNOS_USB3_PHYCLKRST_REF_CLKDIV2 (1 << 18)
+
+#define EXYNOS_USB3_PHYCLKRST_MPLL_MULTIPLIER_MASK (0x7f << 11)
+#define EXYNOS_USB3_PHYCLKRST_MPLL_MULTIPLIER_SHIFT (11)
+#define EXYNOS_USB3_PHYCLKRST_MPLL_MULTIPLIER_LIMIT (0x7f)
+#define EXYNOS_USB3_PHYCLKRST_MPLL_MULTIPLIER(_x) ((_x) << 11)
+
+#define EXYNOS_USB3_PHYCLKRST_FSEL_MASK (0x3f << 5)
+#define EXYNOS_USB3_PHYCLKRST_FSEL_SHIFT (5)
+#define EXYNOS_USB3_PHYCLKRST_FSEL_LIMIT (0x3f)
+#define EXYNOS_USB3_PHYCLKRST_FSEL(_x) ((_x) << 5)
+
+#define EXYNOS_USB3_PHYCLKRST_RETENABLEN (1 << 4)
+
+#define EXYNOS_USB3_PHYCLKRST_REFCLKSEL_MASK (0x03 << 2)
+#define EXYNOS_USB3_PHYCLKRST_REFCLKSEL_SHIFT (2)
+#define EXYNOS_USB3_PHYCLKRST_REFCLKSEL_LIMIT (0x03)
+#define EXYNOS_USB3_PHYCLKRST_REFCLKSEL(_x) ((_x) << 2)
+
+#define EXYNOS_USB3_PHYCLKRST_PORTRESET (1 << 1)
+#define EXYNOS_USB3_PHYCLKRST_COMMONONN (1 << 0)
+
+#define EXYNOS_USB3_PHYREG0 EXYNOS_USB3_PHYREG(0x14)
+#define EXYNOS_USB3_PHYREG1 EXYNOS_USB3_PHYREG(0x18)
+#define EXYNOS_USB3_PHYPARAM0 EXYNOS_USB3_PHYREG(0x1C)
+#define EXYNOS_USB3_PHYPARAM1 EXYNOS_USB3_PHYREG(0x20)
+#define EXYNOS_USB3_PHYTERM EXYNOS_USB3_PHYREG(0x24)
+
+#define EXYNOS_USB3_PHYTEST EXYNOS_USB3_PHYREG(0x28)
+
+#define EXYNOS_USB3_PHYTEST_POWERDOWN_SSP (1 << 3)
+#define EXYNOS_USB3_PHYTEST_POWERDOWN_HSP (1 << 3)
+
+#define EXYNOS_USB3_PHYADP EXYNOS_USB3_PHYREG(0x2C)
+#define EXYNOS_USB3_PHYBATCHG EXYNOS_USB3_PHYREG(0x30)
+#define EXYNOS_USB3_PHYRESUME EXYNOS_USB3_PHYREG(0x34)
+#define EXYNOS_USB3_LINKPORT EXYNOS_USB3_PHYREG(0x44)
+#endif /* __PLAT_SAMSUNG_REGS_USB3_EXYNOS_DRD_PHY_H */
diff --git a/arch/arm/plat-samsung/include/plat/usb-phy.h b/arch/arm/plat-samsung/include/plat/usb-phy.h
index 959bcdb..f784101 100644
--- a/arch/arm/plat-samsung/include/plat/usb-phy.h
+++ b/arch/arm/plat-samsung/include/plat/usb-phy.h
@@ -14,6 +14,7 @@
enum s5p_usb_phy_type {
S5P_USB_PHY_DEVICE,
S5P_USB_PHY_HOST,
+ S5P_USB_PHY_DRD,
};
extern int s5p_usb_phy_init(struct platform_device *pdev, int type);
--
1.7.0.4
More information about the linux-arm-kernel
mailing list