[PATCH 13/16] ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT.
Andrew Lunn
andrew at lunn.ch
Fri Jul 20 13:35:48 EDT 2012
Signed-off-by: Andrew Lunn <andrew at lunn.ch>
Tested-by: Josh Coombs <josh.coombs at gmail.com>
---
arch/arm/boot/dts/kirkwood-goflexnet.dts | 50 ++++++++++++++++++
arch/arm/mach-kirkwood/board-goflexnet.c | 84 ------------------------------
2 files changed, 50 insertions(+), 84 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
index c5d5a4e..f6974d1 100644
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
@@ -45,5 +45,55 @@
reg = <0x02500000 0xd800000>;
};
};
+ sata at 80000 {
+ status = "okay";
+ nr-ports = <2>;
+ };
+
+ };
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ health {
+ label = "status:green:health";
+ gpios = <&gpio1 14 1>;
+ linux,default-trigger = "default-on";
+ };
+ fault {
+ label = "status:orange:fault";
+ gpios = <&gpio1 15 1>;
+ };
+ left0 {
+ label = "status:white:left0";
+ gpios = <&gpio1 10 0>;
+ };
+ left1 {
+ label = "status:white:left1";
+ gpios = <&gpio1 11 0>;
+ };
+ left2 {
+ label = "status:white:left2";
+ gpios = <&gpio1 12 0>;
+ };
+ left3 {
+ label = "status:white:left3";
+ gpios = <&gpio1 13 0>;
+ };
+ right0 {
+ label = "status:white:right0";
+ gpios = <&gpio1 6 0>;
+ };
+ right1 {
+ label = "status:white:right1";
+ gpios = <&gpio1 7 0>;
+ };
+ right2 {
+ label = "status:white:right2";
+ gpios = <&gpio1 8 0>;
+ };
+ right3 {
+ label = "status:white:right3";
+ gpios = <&gpio1 9 0>;
+ };
};
};
diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c
index 3957ece..413e2c8 100644
--- a/arch/arm/mach-kirkwood/board-goflexnet.c
+++ b/arch/arm/mach-kirkwood/board-goflexnet.c
@@ -27,7 +27,6 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/gpio.h>
-#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -41,86 +40,6 @@ static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
-static struct mv_sata_platform_data goflexnet_sata_data = {
- .n_ports = 2,
-};
-
-static struct gpio_led goflexnet_led_pins[] = {
- {
- .name = "status:green:health",
- .default_trigger = "default-on",
- .gpio = 46,
- .active_low = 1,
- },
- {
- .name = "status:orange:fault",
- .default_trigger = "none",
- .gpio = 47,
- .active_low = 1,
- },
- {
- .name = "status:white:left0",
- .default_trigger = "none",
- .gpio = 42,
- .active_low = 0,
- },
- {
- .name = "status:white:left1",
- .default_trigger = "none",
- .gpio = 43,
- .active_low = 0,
- },
- {
- .name = "status:white:left2",
- .default_trigger = "none",
- .gpio = 44,
- .active_low = 0,
- },
- {
- .name = "status:white:left3",
- .default_trigger = "none",
- .gpio = 45,
- .active_low = 0,
- },
- {
- .name = "status:white:right0",
- .default_trigger = "none",
- .gpio = 38,
- .active_low = 0,
- },
- {
- .name = "status:white:right1",
- .default_trigger = "none",
- .gpio = 39,
- .active_low = 0,
- },
- {
- .name = "status:white:right2",
- .default_trigger = "none",
- .gpio = 40,
- .active_low = 0,
- },
- {
- .name = "status:white:right3",
- .default_trigger = "none",
- .gpio = 41,
- .active_low = 0,
- },
-};
-
-static struct gpio_led_platform_data goflexnet_led_data = {
- .leds = goflexnet_led_pins,
- .num_leds = ARRAY_SIZE(goflexnet_led_pins),
-};
-
-static struct platform_device goflexnet_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &goflexnet_led_data,
- }
-};
-
static unsigned int goflexnet_mpp_config[] __initdata = {
MPP29_GPIO, /* USB Power Enable */
MPP47_GPIO, /* LED Orange */
@@ -149,7 +68,4 @@ void __init goflexnet_init(void)
kirkwood_ehci_init();
kirkwood_ge00_init(&goflexnet_ge00_data);
- kirkwood_sata_init(&goflexnet_sata_data);
-
- platform_device_register(&goflexnet_leds);
}
--
1.7.10
More information about the linux-arm-kernel
mailing list