[PATCH V2 4/7] ARM: EXYNOS: Adding DRM platform device

[Joonyoung Shim]

On 07/18/2012 02:57 PM, Leela Krishna Amudala wrote:
> Add DRM platform device to machine file for exynos5.
>
> Signed-off-by: Prathyush K <prathyush.k at samsung.com>
> Signed-off-by: Leela Krishna Amudala <l.krishna at samsung.com>
> ---
>   arch/arm/mach-exynos/mach-exynos5-dt.c |   27 +++++++++++++++++++++++++++
>   1 files changed, 27 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
> index 02a0e68..99f2b24 100644
> --- a/arch/arm/mach-exynos/mach-exynos5-dt.c
> +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
> @@ -17,6 +17,7 @@
>   
>   #include <asm/mach/arch.h>
>   #include <asm/hardware/gic.h>
> +#include <asm/io.h>
>   #include <mach/map.h>
>   
>   #include <plat/cpu.h>
> @@ -27,6 +28,22 @@
>   #include "common.h"
>   #include <video/platform_lcd.h>
>   
> +static void exynos_fimd_gpio_setup_24bpp(void)

The function name is wrong, this function doesn't control gpios.

> +{
> +	unsigned int reg = 0;
> +	/*
> +	 * Set DISP1BLK_CFG register for Display path selection
> +	 * FIMD of DISP1_BLK Bypass selection : DISP1BLK_CFG[15]
> +	 * ---------------------
> +	 * 0 | MIE/MDNIE
> +	 * 1 | FIMD : selected
> +	 */
> +	reg = __raw_readl(S3C_VA_SYS + 0x0214);
> +	reg &= ~(1 << 15);      /* To save other reset values */
> +	reg |= (1 << 15);
> +	__raw_writel(reg, S3C_VA_SYS + 0x0214);
> +}

If needs this, move to arch/arm/mach-exynos/setup-fimd0.c

> +
>   static int smdk5250_bl_notify(struct device *unused, int brightness)
>   {
>   	/* manage lcd_bl_en signal */
> @@ -49,6 +66,14 @@ static struct platform_pwm_backlight_data smdk5250_bl_data = {
>   	.notify		= smdk5250_bl_notify,
>   };
>   
> +static struct platform_device exynos_drm_device = {
> +	.name		= "exynos-drm",
> +	.dev = {
> +		.dma_mask = &exynos_drm_device.dev.coherent_dma_mask,
> +		.coherent_dma_mask = 0xffffffffUL,
> +	}
> +};
> +

There is already exynos-drm device at the arch/arm/mach-exynos/dev-drm.c

>   static void lcd_set_power(struct plat_lcd_data *pd,
>   			unsigned int power)
>   {
> @@ -138,6 +163,7 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
>   
>   static struct platform_device *smdk5250_devices[] __initdata = {
>   	&smdk5250_lcd, /* for platform_lcd device */
> +	&exynos_drm_device,
>   };
>   
>   static void __init exynos5250_dt_map_io(void)
> @@ -151,6 +177,7 @@ static void __init exynos5250_dt_machine_init(void)
>   	samsung_bl_set(&smdk5250_bl_gpio_info, &smdk5250_bl_data);
>   	of_platform_populate(NULL, of_default_bus_match_table,
>   				exynos5250_auxdata_lookup, NULL);
> +	exynos_fimd_gpio_setup_24bpp();
>   	platform_add_devices(smdk5250_devices, ARRAY_SIZE(smdk5250_devices));
>   }
>   

Thanks.