[PATCH v2 1/2] arm/dts: Add AM33XX basic pinctrl support

AnilKumar Ch anilkumar at ti.com
Fri Jul 20 03:31:47 EDT 2012


Add basic pinctrl support for AM33XX family of devices by adding DT
data to am33xx dtsi file. These patches are based on pinctrl-single
driver and tested on am335x-evm & am335x-bone devices.

Signed-off-by: AnilKumar Ch <anilkumar at ti.com>
---
 arch/arm/boot/dts/am33xx.dtsi |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 59509c4..9b974dc 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -40,6 +40,15 @@
 		};
 	};
 
+	am3358_pinmux: pinmux at 44E10800 {
+		compatible = "pinctrl-single";
+		reg = <0x44E10800 0x0338>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x7F>;
+	};
+
 	/*
 	 * XXX: Use a flat representation of the AM33XX interconnect.
 	 * The real AM33XX interconnect network is quite complex.Since
-- 
1.7.0.4




More information about the linux-arm-kernel mailing list