[PATCH v2 2/2] arm/dts: Configure pinmuxs for user leds control on Bone
AnilKumar Ch
anilkumar at ti.com
Fri Jul 20 03:31:48 EDT 2012
Adds GPIO pinctrl nodes to am3358_pinmux master node to control
user leds (USR0, USR1, USR2 and USR3) present on BeagleBone.
Signed-off-by: AnilKumar Ch <anilkumar at ti.com>
---
arch/arm/boot/dts/am335x-bone.dts | 15 +++++++++++++++
1 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index a4d4415..452ce3f 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -28,3 +28,18 @@
};
/include/ "tps65217.dtsi"
+
+&am3358_pinmux {
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&userled_pins>;
+
+ userled_pins: pinmux_userled_pins {
+ pinctrl-single,pins = <
+ 0x54 0x7 /* gpmc_a5.gpio1_21, OMAP_PIN_OUTPUT | OMAP_MUX_MODE7 */
+ 0x58 0x17 /* gpmc_a6.gpio1_22, OMAP_PIN_OUTPUT_PULLUP | OMAP_MUX_MODE7 */
+ 0x5C 0x7 /* gpmc_a7.gpio1_23, OMAP_PIN_OUTPUT | OMAP_MUX_MODE7 */
+ 0x60 0x17 /* gpmc_a8.gpio1_24, OMAP_PIN_OUTPUT_PULLUP | OMAP_MUX_MODE7 */
+ >;
+ };
+};
--
1.7.0.4
More information about the linux-arm-kernel
mailing list