[PATCH 2/3] PM / OPP: Initialize OPP table from device tree
Menon, Nishanth
nm at ti.com
Fri Jul 20 02:00:26 EDT 2012
On Thu, Jul 19, 2012 at 10:54 AM, Shawn Guo <shawn.guo at linaro.org> wrote:
> With a lot of devices booting from device tree nowadays, it requires
> that OPP table can be initialized from device tree. The patch adds
> a helper function of_init_opp_table together with a binding doc for
> that purpose.
nice to see this happen, a quick feedback:
>
> Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
> ---
> Documentation/devicetree/bindings/power/opp.txt | 29 ++++++++++
> drivers/base/power/opp.c | 66 +++++++++++++++++++++++
> include/linux/opp.h | 4 ++
> 3 files changed, 99 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/power/opp.txt
>
> diff --git a/Documentation/devicetree/bindings/power/opp.txt b/Documentation/devicetree/bindings/power/opp.txt
> new file mode 100644
> index 0000000..1dd0db2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/opp.txt
> @@ -0,0 +1,29 @@
> +* Generic OPP Interface
> +
> +SoCs have a standard set of tuples consisting of frequency and
> +voltage pairs that the device will support per voltage domain. These
> +are called Operating Performance Points or OPPs.
> +
> +Properties:
> +- operating-points: An array of 3-tuples items, and each item consists
> + of frequency, voltage and enabling like <freq vol en>.
> + freq: clock frequency in kHz
> + vol: voltage in microvolt
> + en: initially enabled (1) or not (0)
> +
> +Examples:
> +
> +cpu at 0 {
> + compatible = "arm,cortex-a9";
I am not sure how this works - would an example of OMAP4430, 60, 70
help? they have completely different OPP entries.
> + reg = <0>;
> + next-level-cache = <&L2>;
> + operating-points = <
> + /* kHz uV en */
> + 1200000 1275000 0
> + 996000 1225000 1
> + 792000 1100000 1
> + 672000 1100000 0
> + 396000 950000 1
> + 198000 850000 1
Just my 2cents, If we change en to be a flag:
0 - add, but disable
1 - add (enabled)
we could extend this further if the definition is a flag, for example:
2 - add and disable IF any of notifier chain return failure
3- add but dont call notifier chain (e.g. OPPs that are present for All SoC)
in addition, SoC might have additional properties associated with each
OPP such a flag
could be split up to mean lower 16 bits as OPP library flag and higher
16 bit to mean SoC custom flag
Example - On certain SoC a specific type of power technique is
supposed to be used per OPP, such a flag
passed on via notifiers to SoC handler might be capable of
centralizing the OPP information into the DT.
> + >;
> +};
> diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c
> index ac993ea..2d750f9 100644
> --- a/drivers/base/power/opp.c
> +++ b/drivers/base/power/opp.c
> @@ -22,6 +22,7 @@
> #include <linux/rculist.h>
> #include <linux/rcupdate.h>
> #include <linux/opp.h>
> +#include <linux/of.h>
>
> /*
> * Internal data structure organization with the OPP layer library is as
> @@ -674,3 +675,68 @@ struct srcu_notifier_head *opp_get_notifier(struct device *dev)
>
> return &dev_opp->head;
> }
> +
> +#ifdef CONFIG_OF
> +/**
> + * of_init_opp_table() - Initialize opp table from device tree
> + * @dev: device pointer used to lookup device OPPs.
> + *
> + * Register the initial OPP table with the OPP library for given device.
> + */
> +int of_init_opp_table(struct device *dev)
> +{
> + struct device_node *np = dev->of_node;
> + const char *propname = "operating-points";
> + const struct property *pp;
> + u32 *opp;
> + int ret, i, nr;
> +
> + pp = of_find_property(np, propname, NULL);
> + if (!pp) {
> + dev_err(dev, "%s: Unable to find property", __func__);
> + return -ENODEV;
> + }
> +
> + opp = kzalloc(pp->length, GFP_KERNEL);
> + if (!opp) {
> + dev_err(dev, "%s: Unable to allocate array\n", __func__);
> + return -ENOMEM;
> + }
> +
> + nr = pp->length / sizeof(u32);
error warn if the pp->length is not multiple of u32? we also expect
later on to be a multiple of 3(f,v,disable
> + ret = of_property_read_u32_array(np, propname, opp, nr);
> + if (ret) {
> + dev_err(dev, "%s: Unable to read OPPs\n", __func__);
> + goto out;
> + }
> +
> + nr /= 3;
> + for (i = 0; i < nr; i++) {
> + /*
> + * Each OPP is a set of tuples consisting of frequency,
> + * voltage and availability like <freq-kHz vol-uV enable>.
> + */
> + u32 *val = opp + i * 3;
> +
> + val[0] *= 1000;
> + ret = opp_add(dev, val[0], val[1]);
> + if (ret) {
> + dev_warn(dev, "%s: Failed to add OPP %d: %d\n",
> + __func__, val[0], ret);
> + continue;
> + }
> +
> + if (!val[2]) {
> + ret = opp_disable(dev, val[0]);
Since we are updating the table out of context of the SoC users,
consider what might happen if someone where to operate on the OPP
after opp_add, but before opp_disable?
instead of having the pain of adding an OPP and then disabling it,
since the code will now move to core OPP
library itself, wont it be better to hold dev_opp_list_lock and update
the full table with a proper list walk - yes
the current opp_add and opp_disable apis would need refactoring to be
reusable. It will also save on
synchronize_rcu calls on multiple iterations of the list.
> + if (ret)
> + dev_warn(dev, "%s: Failed to disable OPP %d: %d\n",
> + __func__, val[0], ret);
umm... but we override the return with 0? OPP add failure might
indicate the table is invalid/corrupted - or no memory.
What is the point in populating a bad table up? having a singular
function with direct access to internal structures
might save us these un-necessary dilemma.
> + }
> + }
> +
> + ret = 0;
> +out:
> + kfree(opp);
> + return ret;
> +}
> +#endif
> diff --git a/include/linux/opp.h b/include/linux/opp.h
> index 2a4e5fa..fd165ad 100644
> --- a/include/linux/opp.h
> +++ b/include/linux/opp.h
> @@ -48,6 +48,10 @@ int opp_disable(struct device *dev, unsigned long freq);
>
> struct srcu_notifier_head *opp_get_notifier(struct device *dev);
>
> +#ifdef CONFIG_OF
> +int of_init_opp_table(struct device *dev);
#else
static inline int of_init_opp_table(struct device *dev) { return -EINVAL; }
?
> +#endif
> +
> #else
> static inline unsigned long opp_get_voltage(struct opp *opp)
> {
Regards,
Nishanth Menon
More information about the linux-arm-kernel
mailing list