[PATCH v5 04/11] arm: omap: hwmod: add a new addr space in otg for writing to control module

Kishon Vijay Abraham I kishon at ti.com
Fri Jul 20 01:37:24 EDT 2012


The mailbox register for usb otg in omap is present in control module.
On detection of any events VBUS or ID, this register should be written
to send the notification to musb core.

Till we have a separate control module driver to write to control module,
omap2430 will handle the register writes to control module by itself. So
a new address space to represent this control module register is added
to usb_otg_hs.

Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index ba24d15..c50d828 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -5922,6 +5922,11 @@ static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = {
 		.pa_end		= 0x4a0ab7ff,
 		.flags		= ADDR_TYPE_RT
 	},
+	{
+		.pa_start	= 0x4a00233c,
+		.pa_end		= 0x4a00233f,
+		.flags		= ADDR_TYPE_RT
+	},
 	{ }
 };
 
-- 
1.7.9.5




More information about the linux-arm-kernel mailing list