[PATCH 4/4] ARM: Kirkwood: Describe DNS32? gpio-keys in DT.
Jamie Lentin
jm at lentin.co.uk
Thu Jul 19 16:31:00 EDT 2012
Move description of GPIO keys on both the DNS320 and DNS325 into DT.
Signed-off-by: Jamie Lentin <jm at lentin.co.uk>
---
arch/arm/boot/dts/kirkwood-dnskw.dtsi | 21 +++++++++++++++++++
arch/arm/mach-kirkwood/board-dnskw.c | 37 ---------------------------------
2 files changed, 21 insertions(+), 37 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
index 067672c..2bad626 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -4,6 +4,27 @@
model = "D-Link DNS NASes (kirkwood-based)";
compatible = "dlink,dns-kirkwood", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ button at 1 {
+ label = "Power button";
+ linux,code = <116>;
+ gpios = <&gpio1 2 1>;
+ };
+ button at 2 {
+ label = "USB unmount button";
+ linux,code = <161>;
+ gpios = <&gpio1 15 1>;
+ };
+ button at 3 {
+ label = "Reset button";
+ linux,code = <0x198>;
+ gpios = <&gpio1 16 1>;
+ };
+ };
+
ocp at f1000000 {
sata at 80000 {
status = "okay";
diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c
index aac9c90..4ab3506 100644
--- a/arch/arm/mach-kirkwood/board-dnskw.c
+++ b/arch/arm/mach-kirkwood/board-dnskw.c
@@ -19,7 +19,6 @@
#include <linux/of.h>
#include <linux/gpio.h>
#include <linux/input.h>
-#include <linux/gpio_keys.h>
#include <linux/gpio-fan.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
@@ -68,41 +67,6 @@ static unsigned int dnskw_mpp_config[] __initdata = {
0
};
-static struct gpio_keys_button dnskw_button_pins[] = {
- {
- .code = KEY_POWER,
- .gpio = 34,
- .desc = "Power button",
- .active_low = 1,
- },
- {
- .code = KEY_EJECTCD,
- .gpio = 47,
- .desc = "USB unmount button",
- .active_low = 1,
- },
- {
- .code = KEY_RESTART,
- .gpio = 48,
- .desc = "Reset button",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data dnskw_button_data = {
- .buttons = dnskw_button_pins,
- .nbuttons = ARRAY_SIZE(dnskw_button_pins),
-};
-
-static struct platform_device dnskw_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &dnskw_button_data,
- }
-};
-
/* Fan: ADDA AD045HB-G73 40mm 6000rpm at 5v */
static struct gpio_fan_speed dnskw_fan_speed[] = {
{ 0, 0 },
@@ -150,7 +114,6 @@ void __init dnskw_init(void)
kirkwood_ehci_init();
kirkwood_ge00_init(&dnskw_ge00_data);
- platform_device_register(&dnskw_button_device);
platform_device_register(&dnskw_fan_device);
/* Register power-off GPIO. */
--
1.7.10.4
More information about the linux-arm-kernel
mailing list