[PATCH 5/8] ARM: EXYNOS5: Add PHY initialization code for usb 2.0
Vivek Gautam
gautam.vivek at samsung.com
Wed Jul 18 09:45:25 EDT 2012
This patch adds PHY setup functions usb 2.0 support on exynos5
Signed-off-by: Yulgon Kim <yulgon.kim at samsung.com>
Signed-off-by: Abhilash Kesavan <a.kesavan at samsung.com>
Signed-off-by: Vivek Gautam <gautam.vivek at samsung.com>
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index e698ca0..e0bc441 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -416,6 +416,7 @@ config MACH_EXYNOS5_DT
select SOC_EXYNOS5250
select USE_OF
select ARM_AMBA
+ select EXYNOS4_SETUP_USB_PHY
help
Machine support for Samsung Exynos4 machine with device tree enabled.
Select this if a fdt blob is available for the EXYNOS4 SoC based board.
diff --git a/arch/arm/mach-exynos/include/mach/regs-usb-phy.h b/arch/arm/mach-exynos/include/mach/regs-usb-phy.h
index 0727773..2df4bd7 100644
--- a/arch/arm/mach-exynos/include/mach/regs-usb-phy.h
+++ b/arch/arm/mach-exynos/include/mach/regs-usb-phy.h
@@ -13,6 +13,7 @@
#define EXYNOS4_HSOTG_PHYREG(x) ((x) + S3C_VA_USB_HSPHY)
+/* Exynos 4 */
#define EXYNOS4_PHYPWR EXYNOS4_HSOTG_PHYREG(0x00)
#define PHY1_HSIC_NORMAL_MASK (0xf << 9)
#define PHY1_HSIC1_SLEEP (1 << 12)
@@ -71,4 +72,89 @@
#define EXYNOS4_PHY1CON EXYNOS4_HSOTG_PHYREG(0x34)
#define FPENABLEN (1 << 0)
+/* Exynos 5 */
+#define EXYNOS5_PHY_HOST_CTRL0 EXYNOS4_HSOTG_PHYREG(0x00)
+#define HOST_CTRL0_PHYSWRSTALL (0x1 << 31)
+
+#define HOST_CTRL0_REFCLKSEL_XTAL (0x0)
+#define HOST_CTRL0_REFCLKSEL_EXTL (0x1)
+#define HOST_CTRL0_REFCLKSEL_CLK_CORE (0x2)
+#define HOST_CTRL0_REFCLKSEL_MASK (0x3)
+#define HOST_CTRL0_REFCLKSEL_SHIFT (19)
+
+#define EXYNOS5_CLKSEL_50M (0x7)
+#define EXYNOS5_CLKSEL_24M (0x5)
+#define EXYNOS5_CLKSEL_20M (0x4)
+#define EXYNOS5_CLKSEL_19200K (0x3)
+#define EXYNOS5_CLKSEL_12M (0x2)
+#define EXYNOS5_CLKSEL_10M (0x1)
+#define EXYNOS5_CLKSEL_9600K (0x0)
+#define HOST_CTRL0_FSEL_MASK (0x7 << 16)
+#define HOST_CTRL0_CLKSEL_SHIFT (16)
+
+#define HOST_CTRL0_COMMONON_N (0x1 << 9)
+#define HOST_CTRL0_SIDDQ (0x1 << 6)
+#define HOST_CTRL0_FORCESLEEP (0x1 << 5)
+#define HOST_CTRL0_FORCESUSPEND (0x1 << 4)
+#define HOST_CTRL0_WORDINTERFACE (0x1 << 3)
+#define HOST_CTRL0_UTMISWRST (0x1 << 2)
+#define HOST_CTRL0_LINKSWRST (0x1 << 1)
+#define HOST_CTRL0_PHYSWRST (0x1 << 0)
+
+#define EXYNOS5_PHY_HOST_TUNE0 EXYNOS4_HSOTG_PHYREG(0x04)
+#define EXYNOS5_PHY_HOST_TEST0 EXYNOS4_HSOTG_PHYREG(0x08)
+
+#define EXYNOS5_PHY_HSIC_CTRL1 EXYNOS4_HSOTG_PHYREG(0x10)
+#define EXYNOS5_PHY_HSIC_CTRL2 EXYNOS4_HSOTG_PHYREG(0x20)
+#define HSIC_CTRL_REFCLKSEL (0x2)
+#define HSIC_CTRL_REFCLKSEL_MASK (0x3)
+#define HSIC_CTRL_REFCLKSEL_SHIFT (23)
+
+#define HSIC_CTRL_REFCLKDIV_12 (0x24)
+#define HSIC_CTRL_REFCLKDIV_15 (0x1C)
+#define HSIC_CTRL_REFCLKDIV_16 (0x1A)
+#define HSIC_CTRL_REFCLKDIV_19_2 (0x15)
+#define HSIC_CTRL_REFCLKDIV_20 (0x14)
+#define HSIC_CTRL_REFCLKDIV_MASK (0x7f)
+#define HSIC_CTRL_REFCLKDIV_SHIFT (16)
+
+#define HSIC_CTRL_SIDDQ (0x1 << 6)
+#define HSIC_CTRL_FORCESLEEP (0x1 << 5)
+#define HSIC_CTRL_FORCESUSPEND (0x1 << 4)
+#define HSIC_CTRL_WORDINTERFACE (0x1 << 3)
+#define HSIC_CTRL_UTMISWRST (0x1 << 2)
+#define HSIC_CTRL_PHYSWRST (0x1 << 0)
+
+#define EXYNOS5_PHY_HOST_EHCICTRL EXYNOS4_HSOTG_PHYREG(0x30)
+#define EHCICTRL_ENAINCRXALIGN (0x1 << 29)
+#define EHCICTRL_ENAINCR4 (0x1 << 28)
+#define EHCICTRL_ENAINCR8 (0x1 << 27)
+#define EHCICTRL_ENAINCR16 (0x1 << 26)
+
+#define EXYNOS5_PHY_HOST_OHCICTRL EXYNOS4_HSOTG_PHYREG(0x34)
+#define OHCICTRL_SUSPLGCY (0x1 << 3)
+#define OHCICTRL_APPSTARTCLK (0x1 << 2)
+#define OHCICTRL_CNTSEL (0x1 << 1)
+#define OHCICTRL_CLKCKTRST (0x1 << 0)
+
+#define EXYNOS5_PHY_OTG_SYS EXYNOS4_HSOTG_PHYREG(0x38)
+#define OTG_SYS_PHYLINK_SW_RESET (0x1 << 14)
+#define OTG_SYS_LINK_SW_RST_UOTG (0x1 << 13)
+#define OTG_SYS_PHY0_SW_RST (0x1 << 12)
+
+#define OTG_SYS_REF_CLK_SEL_XTAL (0x0)
+#define OTG_SYS_REF_CLK_SEL_EXTL (0x1)
+#define OTG_SYS_REF_CLK_SEL_CLKCORE (0x2)
+#define OTG_SYS_REF_CLK_SEL_MASK (0x3)
+#define OTG_SYS_REF_CLK_SEL_SHIFT (9)
+
+#define OTG_SYS_IP_PULLUP_UOTG (0x1 << 8)
+#define OTG_SYS_COMMON_ON (0x1 << 7)
+#define OTG_SYS_CLKSEL_SHIFT (4)
+#define OTG_SYS_CTRL0_FSEL_MASK (0x7 << 4)
+#define OTG_SYS_FORCE_SLEEP (0x1 << 3)
+#define OTG_SYS_OTGDISABLE (0x1 << 2)
+#define OTG_SYS_SIDDQ_UOTG (0x1 << 1)
+#define OTG_SYS_FORCE_SUSPEND (0x1 << 0)
+
#endif /* __PLAT_S5P_REGS_USB_PHY_H */
diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c
index bfc1367..3f7a26a 100644
--- a/arch/arm/mach-exynos/setup-usb-phy.c
+++ b/arch/arm/mach-exynos/setup-usb-phy.c
@@ -19,11 +19,36 @@
#include <plat/cpu.h>
#include <plat/usb-phy.h>
+#define PHY_ENABLE 1
+#define PHY_DISABLE 0
+
+enum usb_phy_type {
+ USB_PHY = (0x1 << 0),
+};
+
static atomic_t host_usage;
static int exynos4_usb_host_phy_is_on(void)
{
- return (readl(EXYNOS4_PHYPWR) & PHY1_STD_ANALOG_POWERDOWN) ? 0 : 1;
+ if (soc_is_exynos5250()) {
+ return (readl(EXYNOS5_PHY_HOST_CTRL0) &
+ HOST_CTRL0_PHYSWRSTALL) ? 0 : 1;
+ } else {
+ return (readl(EXYNOS4_PHYPWR) &
+ PHY1_STD_ANALOG_POWERDOWN) ? 0 : 1;
+ }
+}
+
+static void exynos_usb_mux_change(struct platform_device *pdev, int val)
+{
+ u32 is_host;
+ if (soc_is_exynos5250()) {
+ is_host = readl(EXYNOS5_USB_CFG);
+ writel(val, EXYNOS5_USB_CFG);
+ }
+ if (is_host != val)
+ dev_dbg(&pdev->dev, "Change USB MUX from %s to %s",
+ is_host ? "Host" : "Device", val ? "Host" : "Device");
}
struct clk *exynos_usb_clock_enable(struct platform_device *pdev)
@@ -32,7 +57,10 @@ struct clk *exynos_usb_clock_enable(struct platform_device *pdev)
int err = 0;
if (!usb_clk) {
- usb_clk = clk_get(&pdev->dev, "otg");
+ if (soc_is_exynos5250())
+ usb_clk = clk_get(&pdev->dev, "usbhost");
+ else
+ usb_clk = clk_get(&pdev->dev, "otg");
if (IS_ERR(usb_clk)) {
dev_err(&pdev->dev, "Failed to get otg clock\n");
return NULL;
@@ -52,7 +80,11 @@ static int exynos4210_usb_phy_clkset(struct platform_device *pdev)
struct clk *xusbxti_clk;
u32 phyclk = 0;
- xusbxti_clk = clk_get(&pdev->dev, "xusbxti");
+ if (soc_is_exynos5250())
+ xusbxti_clk = clk_get(&pdev->dev, "ext_xtal");
+ else
+ xusbxti_clk = clk_get(&pdev->dev, "xusbxti");
+
if (xusbxti_clk && !IS_ERR(xusbxti_clk)) {
if (soc_is_exynos4210()) {
/* set clock frequency for PLL */
@@ -98,12 +130,47 @@ static int exynos4210_usb_phy_clkset(struct platform_device *pdev)
break;
}
writel(phyclk, EXYNOS4_PHYCLK);
+ } else if (soc_is_exynos5250()) {
+ /* set clock frequency for PLL */
+ switch (clk_get_rate(xusbxti_clk)) {
+ case 96 * 100000:
+ phyclk |= EXYNOS5_CLKSEL_9600K;
+ break;
+ case 10 * MHZ:
+ phyclk |= EXYNOS5_CLKSEL_10M;
+ break;
+ case 12 * MHZ:
+ phyclk |= EXYNOS5_CLKSEL_12M;
+ break;
+ case 192 * 100000:
+ phyclk |= EXYNOS5_CLKSEL_19200K;
+ break;
+ case 20 * MHZ:
+ phyclk |= EXYNOS5_CLKSEL_20M;
+ break;
+ case 50 * MHZ:
+ phyclk |= EXYNOS5_CLKSEL_50M;
+ break;
+ case 24 * MHZ:
+ default:
+ /* default reference clock */
+ phyclk |= EXYNOS5_CLKSEL_24M;
+ break;
+ }
}
clk_put(xusbxti_clk);
}
return phyclk;
}
+static void exynos_usb_phy_control(enum usb_phy_type phy_type , int on)
+{
+ if (soc_is_exynos5250()) {
+ if (phy_type & USB_PHY)
+ writel(on, S5P_USBHOST_PHY_CONTROL);
+ }
+}
+
static int exynos4210_usb_phy0_init(struct platform_device *pdev)
{
u32 rstcon;
@@ -206,12 +273,158 @@ static int exynos4210_usb_phy1_exit(struct platform_device *pdev)
return 0;
}
+static int exynos5_usb_phy20_init(struct platform_device *pdev)
+{
+ struct clk *host_clk;
+ u32 refclk_freq;
+ u32 hostphy_ctrl0;
+ u32 otgphy_sys;
+ u32 hsic_ctrl;
+ u32 ehcictrl;
+ u32 ohcictrl;
+
+ atomic_inc(&host_usage);
+ host_clk = exynos_usb_clock_enable(pdev);
+ if (host_clk == NULL) {
+ dev_err(&pdev->dev, "Failed to enable USB2.0 host clock\n");
+ return -1;
+ }
+
+ if (exynos4_usb_host_phy_is_on()) {
+ dev_err(&pdev->dev, "Already power on PHY\n");
+ return 0;
+ }
+
+ exynos_usb_mux_change(pdev, 1);
+
+ exynos_usb_phy_control(USB_PHY, PHY_ENABLE);
+
+ /* Host and Device should be set at the same time */
+ hostphy_ctrl0 = readl(EXYNOS5_PHY_HOST_CTRL0);
+ hostphy_ctrl0 &= ~(HOST_CTRL0_FSEL_MASK);
+ otgphy_sys = readl(EXYNOS5_PHY_OTG_SYS);
+ otgphy_sys &= ~(OTG_SYS_CTRL0_FSEL_MASK);
+
+ /* 2.0 phy reference clock configuration */
+ refclk_freq = exynos4210_usb_phy_clkset(pdev);
+ hostphy_ctrl0 |= (refclk_freq << HOST_CTRL0_CLKSEL_SHIFT);
+ otgphy_sys |= (refclk_freq << OTG_SYS_CLKSEL_SHIFT);
+
+ /* COMMON Block configuration during suspend */
+ hostphy_ctrl0 &= ~(HOST_CTRL0_COMMONON_N);
+ otgphy_sys |= (OTG_SYS_COMMON_ON);
+
+ /* otg phy reset */
+ otgphy_sys &= ~(OTG_SYS_FORCE_SUSPEND | OTG_SYS_SIDDQ_UOTG
+ | OTG_SYS_FORCE_SLEEP);
+ otgphy_sys &= ~(OTG_SYS_REF_CLK_SEL_MASK << OTG_SYS_REF_CLK_SEL_SHIFT);
+ otgphy_sys |= (((OTG_SYS_REF_CLK_SEL_CLKCORE & OTG_SYS_REF_CLK_SEL_MASK)
+ << OTG_SYS_REF_CLK_SEL_SHIFT)
+ | OTG_SYS_OTGDISABLE);
+ otgphy_sys |= (OTG_SYS_PHY0_SW_RST | OTG_SYS_LINK_SW_RST_UOTG
+ | OTG_SYS_PHYLINK_SW_RESET);
+ writel(otgphy_sys, EXYNOS5_PHY_OTG_SYS);
+ udelay(10);
+ otgphy_sys &= ~(OTG_SYS_PHY0_SW_RST | OTG_SYS_LINK_SW_RST_UOTG
+ | OTG_SYS_PHYLINK_SW_RESET);
+ writel(otgphy_sys, EXYNOS5_PHY_OTG_SYS);
+
+ /* host phy reset */
+ hostphy_ctrl0 &= ~(HOST_CTRL0_PHYSWRST | HOST_CTRL0_PHYSWRSTALL
+ | HOST_CTRL0_SIDDQ);
+ hostphy_ctrl0 &= ~(HOST_CTRL0_FORCESUSPEND | HOST_CTRL0_FORCESLEEP);
+ hostphy_ctrl0 |= (HOST_CTRL0_LINKSWRST | HOST_CTRL0_UTMISWRST);
+ writel(hostphy_ctrl0, EXYNOS5_PHY_HOST_CTRL0);
+ udelay(10);
+ hostphy_ctrl0 &= ~(HOST_CTRL0_LINKSWRST | HOST_CTRL0_UTMISWRST);
+ writel(hostphy_ctrl0, EXYNOS5_PHY_HOST_CTRL0);
+
+ /* HSIC phy reset */
+ hsic_ctrl = (((HSIC_CTRL_REFCLKDIV_12 & HSIC_CTRL_REFCLKDIV_MASK)
+ << HSIC_CTRL_REFCLKDIV_SHIFT)
+ | ((HSIC_CTRL_REFCLKSEL & HSIC_CTRL_REFCLKSEL_MASK)
+ << HSIC_CTRL_REFCLKSEL_SHIFT)
+ | HSIC_CTRL_PHYSWRST);
+ writel(hsic_ctrl, EXYNOS5_PHY_HSIC_CTRL1);
+ writel(hsic_ctrl, EXYNOS5_PHY_HSIC_CTRL2);
+ udelay(10);
+ hsic_ctrl &= ~(HSIC_CTRL_PHYSWRST);
+ writel(hsic_ctrl, EXYNOS5_PHY_HSIC_CTRL1);
+ writel(hsic_ctrl, EXYNOS5_PHY_HSIC_CTRL2);
+
+ udelay(80);
+
+ /* enable EHCI DMA burst */
+ ehcictrl = readl(EXYNOS5_PHY_HOST_EHCICTRL);
+ ehcictrl |= (EHCICTRL_ENAINCRXALIGN | EHCICTRL_ENAINCR4
+ | EHCICTRL_ENAINCR8 | EHCICTRL_ENAINCR16);
+ writel(ehcictrl, EXYNOS5_PHY_HOST_EHCICTRL);
+
+ /* set ohci_suspend_on_n */
+ ohcictrl = readl(EXYNOS5_PHY_HOST_OHCICTRL);
+ ohcictrl |= OHCICTRL_SUSPLGCY;
+ writel(ohcictrl, EXYNOS5_PHY_HOST_OHCICTRL);
+
+ clk_disable(host_clk);
+ clk_put(host_clk);
+ return 0;
+}
+
+static int exynos5_usb_phy20_exit(struct platform_device *pdev)
+{
+ struct clk *host_clk;
+ u32 hostphy_ctrl0;
+ u32 otgphy_sys;
+ u32 hsic_ctrl;
+
+ if (atomic_dec_return(&host_usage) > 0) {
+ dev_info(&pdev->dev, "still being used\n");
+ return -EBUSY;
+ }
+
+ host_clk = exynos_usb_clock_enable(pdev);
+ if (host_clk == NULL) {
+ dev_err(&pdev->dev, "Failed to enable otg clock this time\n");
+ return -1;
+ }
+
+ hsic_ctrl = (((HSIC_CTRL_REFCLKDIV_12 & HSIC_CTRL_REFCLKDIV_MASK)
+ << HSIC_CTRL_REFCLKDIV_SHIFT)
+ | ((HSIC_CTRL_REFCLKSEL & HSIC_CTRL_REFCLKSEL_MASK)
+ << HSIC_CTRL_REFCLKSEL_SHIFT)
+ | HSIC_CTRL_SIDDQ | HSIC_CTRL_FORCESLEEP
+ | HSIC_CTRL_FORCESUSPEND);
+ writel(hsic_ctrl, EXYNOS5_PHY_HSIC_CTRL1);
+ writel(hsic_ctrl, EXYNOS5_PHY_HSIC_CTRL2);
+
+ hostphy_ctrl0 = readl(EXYNOS5_PHY_HOST_CTRL0);
+ hostphy_ctrl0 |= (HOST_CTRL0_SIDDQ);
+ hostphy_ctrl0 |= (HOST_CTRL0_FORCESUSPEND | HOST_CTRL0_FORCESLEEP);
+ hostphy_ctrl0 |= (HOST_CTRL0_PHYSWRST | HOST_CTRL0_PHYSWRSTALL);
+ writel(hostphy_ctrl0, EXYNOS5_PHY_HOST_CTRL0);
+
+ otgphy_sys = readl(EXYNOS5_PHY_OTG_SYS);
+ otgphy_sys |= (OTG_SYS_FORCE_SUSPEND | OTG_SYS_SIDDQ_UOTG
+ | OTG_SYS_FORCE_SLEEP);
+ writel(otgphy_sys, EXYNOS5_PHY_OTG_SYS);
+
+ exynos_usb_phy_control(USB_PHY, PHY_DISABLE);
+
+ clk_disable(host_clk);
+ clk_put(host_clk);
+ return 0;
+}
+
int s5p_usb_phy_init(struct platform_device *pdev, int type)
{
if (type == S5P_USB_PHY_DEVICE)
return exynos4210_usb_phy0_init(pdev);
- else if (type == S5P_USB_PHY_HOST)
- return exynos4210_usb_phy1_init(pdev);
+ else if (type == S5P_USB_PHY_HOST) {
+ if (soc_is_exynos5250())
+ return exynos5_usb_phy20_init(pdev);
+ else
+ return exynos4210_usb_phy1_init(pdev);
+ }
return -EINVAL;
}
@@ -220,8 +433,11 @@ int s5p_usb_phy_exit(struct platform_device *pdev, int type)
{
if (type == S5P_USB_PHY_DEVICE)
return exynos4210_usb_phy0_exit(pdev);
- else if (type == S5P_USB_PHY_HOST)
- return exynos4210_usb_phy1_exit(pdev);
-
+ else if (type == S5P_USB_PHY_HOST) {
+ if (soc_is_exynos5250())
+ return exynos5_usb_phy20_exit(pdev);
+ else
+ return exynos4210_usb_phy1_exit(pdev);
+ }
return -EINVAL;
}
--
1.7.0.4
More information about the linux-arm-kernel
mailing list