[PATCH v2 1/2] USB: chipidea: add imx usbmisc support
Sascha Hauer
s.hauer at pengutronix.de
Wed Jul 18 06:52:04 EDT 2012
On Wed, Jul 18, 2012 at 06:29:06PM +0800, Richard Zhao wrote:
> i.MX usb controllers shares non-core registers, which may include
> SoC specific controls. We take it as a usbmisc device and usbmisc
> driver set operations needed by ci13xxx_imx driver.
>
> For example, Sabrelite board has bad over-current design, we can
> usbmisc to disable over-current detect.
>
> Signed-off-by: Richard Zhao <richard.zhao at freescale.com>
> ---
> .../devicetree/bindings/usb/ci13xxx-imx.txt | 2 +
> .../devicetree/bindings/usb/usbmisc-imx.txt | 12 ++
> drivers/usb/chipidea/Makefile | 2 +-
> drivers/usb/chipidea/ci13xxx_imx.c | 23 +++
> drivers/usb/chipidea/usbmisc_imx6q.c | 161 ++++++++++++++++++++
> 5 files changed, 199 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/usb/usbmisc-imx.txt
> create mode 100644 drivers/usb/chipidea/usbmisc_imx6q.c
>
> diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> index 2c29041..06105ce 100644
> --- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> +++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> @@ -8,6 +8,7 @@ Required properties:
> Optional properties:
> - fsl,usbphy: phandler of usb phy that connects to the only one port
> - vbus-supply: regulator for vbus
> +- disable-over-current: disable over current detect
>
> Examples:
> usb at 02184000 { /* USB OTG */
> @@ -15,4 +16,5 @@ usb at 02184000 { /* USB OTG */
> reg = <0x02184000 0x200>;
> interrupts = <0 43 0x04>;
> fsl,usbphy = <&usbphy1>;
> + disable-over-current;
> };
> diff --git a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
> new file mode 100644
> index 0000000..4fa500d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
> @@ -0,0 +1,12 @@
> +* Freescale i.MX non-core registers
> +
> +Required properties:
> +- compatible: Should be one of below:
> + "fsl,imx6q-usbmisc" for imx6q
> +- reg: Should contain registers location and length
> +
> +Examples:
> +usbmisc at 02184800 {
> + compatible = "fsl,imx6q-usbmisc";
> + reg = <0x02184800 0x200>;
> +};
> diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
> index 5c66d9c..57e510f 100644
> --- a/drivers/usb/chipidea/Makefile
> +++ b/drivers/usb/chipidea/Makefile
> @@ -15,5 +15,5 @@ ifneq ($(CONFIG_PCI),)
> endif
>
> ifneq ($(CONFIG_OF_DEVICE),)
> - obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_imx.o
> + obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_imx.o usbmisc_imx6q.o
> endif
> diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
> index ef60d06..e790c0e 100644
> --- a/drivers/usb/chipidea/ci13xxx_imx.c
> +++ b/drivers/usb/chipidea/ci13xxx_imx.c
> @@ -22,6 +22,7 @@
> #include <linux/regulator/consumer.h>
>
> #include "ci.h"
> +#include "ci13xxx_imx.h"
>
> #define pdev_to_phy(pdev) \
> ((struct usb_phy *)platform_get_drvdata(pdev))
> @@ -34,6 +35,25 @@ struct ci13xxx_imx_data {
> struct regulator *reg_vbus;
> };
>
> +static const struct usbmisc_ops *usbmisc_ops;
> +
> +int usbmisc_set_ops(const struct usbmisc_ops *ops)
> +{
> + if (usbmisc_ops)
> + return -EBUSY;
> +
> + usbmisc_ops = ops;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(usbmisc_set_ops);
> +
> +void usbmisc_unset_ops(const struct usbmisc_ops *ops)
> +{
> + usbmisc_ops = NULL;
> +}
> +EXPORT_SYMBOL_GPL(usbmisc_unset_ops);
> +
> static struct ci13xxx_platform_data ci13xxx_imx_platdata __devinitdata = {
> .name = "ci13xxx_imx",
> .flags = CI13XXX_REQUIRE_TRANSCEIVER |
> @@ -120,6 +140,9 @@ static int __devinit ci13xxx_imx_probe(struct platform_device *pdev)
> *pdev->dev.dma_mask = DMA_BIT_MASK(32);
> dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask);
> }
> +
> + usbmisc_ops->init(&pdev->dev);
usbmisc_ops can be NULL and also can return an error.
> +
> plat_ci = ci13xxx_add_device(&pdev->dev,
> pdev->resource, pdev->num_resources,
> &ci13xxx_imx_platdata);
> diff --git a/drivers/usb/chipidea/usbmisc_imx6q.c b/drivers/usb/chipidea/usbmisc_imx6q.c
> new file mode 100644
> index 0000000..9f69a8c
> --- /dev/null
> +++ b/drivers/usb/chipidea/usbmisc_imx6q.c
> @@ -0,0 +1,161 @@
> +/*
> + * Copyright 2012 Freescale Semiconductor, Inc.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +
> +#include "ci13xxx_imx.h"
> +
> +#define USB_DEV_MAX 4
> +
> +#define BM_OVER_CUR_DIS BIT(7)
> +
> +struct imx6q_usbmisc {
> + void __iomem *base;
> + struct clk *clk;
> + struct device *usb_dev[USB_DEV_MAX];
> + spinlock_t lock;
> +
> + int disable_oc:USB_DEV_MAX;
> +};
Please add a per-port struct instead of adding multiple arrays into
struct imx6q_usbmisc.
Also, I think this per port struct shouldn't be imx6q specific. Then
we could add generic code parsing the oftree flags into the port
specific struct and have SoC specific code which translates this struct
into the acual register settings.
> +
> +static struct imx6q_usbmisc *usbmisc;
> +
> +static int get_index(struct device *dev)
> +{
> + int i, id = -1;
> +
> + for (i = 0; i < USB_DEV_MAX; i ++) {
> + if (usbmisc->usb_dev[i] == dev) {
> + id = i;
> + break;
> + }
> + }
> +
> + if (id != -1)
> + return id;
> +
> + id = of_alias_get_id(dev->of_node, "usb");
> + if (id < 0)
> + dev_err(dev, "failed to get alias id, errno %d\n", id);
> + return id;
> +}
> +
> +static int usbmisc_imx6q_init(struct device *usb_dev)
> +{
> +
> + int id;
> + u32 reg;
> + struct device_node *usb_np;
> + unsigned long flags;
> +
> + id = get_index(usb_dev);
> + if (id < 0)
> + return id;
> +
> + usb_np = usb_dev->of_node;
> + if (of_find_property(usb_np, "disable-over-current", NULL)) {
> + spin_lock_irqsave(&usbmisc->lock, flags);
> + usbmisc->disable_oc |= BIT(id);
> + reg = readl(usbmisc->base + id * 4);
> + writel(reg | BM_OVER_CUR_DIS, usbmisc->base + id * 4);
> + spin_unlock_irqrestore(&usbmisc->lock, flags);
> + }
> +
> + return 0;
> +}
> +
> +static const struct usbmisc_ops imx6q_usbmisc_ops = {
> + .init = usbmisc_imx6q_init,
> +};
> +
> +static const struct of_device_id usbmisc_imx6q_dt_ids[] = {
> + { .compatible = "fsl,imx6q-usbmisc"},
> + { /* sentinel */ }
> +};
> +
> +static int __devinit usbmisc_imx6q_probe(struct platform_device *pdev)
> +{
> + struct resource *res;
> + struct imx6q_usbmisc *data;
> + int ret;
> +
> + if (usbmisc)
> + return -EBUSY;
> +
> + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + spin_lock_init(&data->lock);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + data->base = devm_request_and_ioremap(&pdev->dev, res);
> + if (!data->base)
> + return -EADDRNOTAVAIL;
> +
> + data->clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(data->clk)) {
> + dev_err(&pdev->dev,
> + "failed to get clock, err=%ld\n", PTR_ERR(data->clk));
> + return PTR_ERR(data->clk);
> + }
> +
> + ret = clk_prepare_enable(data->clk);
> + if (ret) {
> + dev_err(&pdev->dev,
> + "clk_prepare_enable failed, err=%d\n", ret);
> + return ret;
> + }
the clk devm ops do not disable the clock, you still have to do this in
your error path.
> +
> + ret = usbmisc_set_ops(&imx6q_usbmisc_ops);
> + if (ret)
> + return ret;
> +
> + usbmisc = data;
> +
> + return 0;
> +}
> +
> +static int __devexit usbmisc_imx6q_remove(struct platform_device *pdev)
> +{
> + usbmisc_unset_ops(&imx6q_usbmisc_ops);
> + clk_disable_unprepare(usbmisc->clk);
> + return 0;
> +}
> +
> +static struct platform_driver usbmisc_imx6q_driver = {
> + .probe = usbmisc_imx6q_probe,
> + .remove = __devexit_p(usbmisc_imx6q_remove),
> + .driver = {
> + .name = "usbmisc_imx6q",
> + .owner = THIS_MODULE,
> + .of_match_table = usbmisc_imx6q_dt_ids,
> + },
> +};
> +
> +static int __init usbmisc_imx6q_drv_init(void)
> +{
> + return platform_driver_register(&usbmisc_imx6q_driver);
> +}
> +subsys_initcall(usbmisc_imx6q_drv_init);
> +
> +static void __exit usbmisc_imx6q_drv_exit(void)
> +{
> + platform_driver_unregister(&usbmisc_imx6q_driver);
> +}
> +module_exit(usbmisc_imx6q_drv_exit);
> +MODULE_ALIAS("platform:usbmisc-imx6q"); MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("i.MX6Q non-core usb register handling");
> +MODULE_AUTHOR("Richard Zhao <richard.zhao at freescale.com>");
> --
> 1.7.9.5
>
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the linux-arm-kernel
mailing list