[PATCH 1/1] mmc: host: enable OMAP DMA engine support for omap hosts by default

[Javier Martinez Canillas]

On Wed, Jul 18, 2012 at 8:59 AM, Tony Lindgren <tony at atomide.com> wrote:
> * Javier Martinez Canillas <javier at dowhile0.org> [120716 23:56]:
>> On Tue, Jul 17, 2012 at 8:45 AM, Shilimkar, Santosh
>> <santosh.shilimkar at ti.com> wrote:
>> > Hi,
>> >
>> > On Tue, Jul 17, 2012 at 6:00 AM, Javier Martinez Canillas
>> > <javier at dowhile0.org> wrote:
>> >> The OMAP MMC and OMAP High Speed MMC hosts now use entirely the DMA
>> >> engine API instead of the previous private DMA API implementation.
>> >>
>> >> So, if the kernel is built with support for any of these hosts but it
>> >> doesn't support DMA devices nor OMAP DMA support, it fails when trying
>> >> to obtain a DMA channel which leads to the following error on an OMAP3
>> >> IGEPv2 Rev.C board (and probably on most OMAP boards with MMC support):
>> >>
>> >> [ 2.199981] omap_hsmmc omap_hsmmc.1: unable to obtain RX DMA engine channel 48
>> >> [    2.215087] omap_hsmmc omap_hsmmc.0: unable to obtain RX DMA engine channel 62
>> >>
>> >> selecting automatically CONFIG_DMADEVICES and CONFIG_DMA_OMAP solves it.
>> >>
>> >> Signed-off-by: Javier Martinez Canillas <javier at dowhile0.org>
>> >> ---
>> > Considering, we are updating drivers to select the DMA engine, can you
>> > also include
>> > "drivers/spi/spi-omap2-mcspi.c" which is also updated for DMA engine.
>> >
>> > Regards
>> > Santosh
>>
>> Hi Santosh,
>>
>> Ok, I'll send a v2 now which includes spi-omap2-mcspi then.
>
> I don't think we should do this, the drivers should work with and without
> dma. This just needs to be added to the omap2plus_defconfig.
>
> Regards,
>
> Tony
> --

Hi Tony,

That was my first approach in fact, I sent this patch:
https://patchwork.kernel.org/patch/1198401/

But then was told by Kevin Hilman that the right solution was to do
the select on the drives to fix not only omap2plus_defconfig but any
config.
So I sent this patch and Santosh agrees with Kevin.

I don't really know the hardware nor the driver well enough to have a
strong position on this.

Best regards,
Javier