[PATCH V2 1/7] ARM: SAMSUNG: add additional registers and SFR definitions for writeback

Marek Szyprowski m.szyprowski at samsung.com
Wed Jul 18 02:51:14 EDT 2012


Hello,

On Wednesday, July 18, 2012 7:57 AM Leela Krishna Amudala wrote:

> This patch updates the register address offsets and adds SFR definitions
> for writeback for Samsung's V8 display controller.
> 
> Signed-off-by: Leela Krishna Amudala <l.krishna at samsung.com>
> ---
>  arch/arm/plat-samsung/include/plat/regs-fb-v4.h |   10 ++++
>  arch/arm/plat-samsung/include/plat/regs-fb.h    |   51 +++++++++++++++++++++++
>  drivers/video/Kconfig                           |    6 +++
>  3 files changed, 67 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/plat-samsung/include/plat/regs-fb-v4.h b/arch/arm/plat-
> samsung/include/plat/regs-fb-v4.h
> index 4c3647f..1639c17 100644
> --- a/arch/arm/plat-samsung/include/plat/regs-fb-v4.h
> +++ b/arch/arm/plat-samsung/include/plat/regs-fb-v4.h
> @@ -30,9 +30,16 @@
>  #define VIDCON1_FSTATUS_EVEN	(1 << 15)
> 
>  /* Video timing controls */
> +#ifdef CONFIG_FB_EXYNOS_FIMD_V8
> +#define VIDTCON0                                (0x20010)
> +#define VIDTCON1                                (0x20014)
> +#define VIDTCON3                                (0x2001C)
> +#else
>  #define VIDTCON0				(0x10)
>  #define VIDTCON1				(0x14)
>  #define VIDTCON2				(0x18)
> +#define VIDTCON3				(0x1C)
> +#endif
> 
>  /* Window position controls */
> 
> @@ -43,9 +50,12 @@
>  #define VIDOSD_BASE				(0x40)
> 
>  #define VIDINTCON0				(0x130)
> +#define VIDINTCON1                              (0x134)
> 
>  /* WINCONx */
> 
> +#define WINCONx_CSC_CON_EQ709                   (1 << 28)
> +#define WINCONx_CSC_CON_EQ601                   (0 << 28)
>  #define WINCONx_CSCWIDTH_MASK			(0x3 << 26)
>  #define WINCONx_CSCWIDTH_SHIFT			(26)
>  #define WINCONx_CSCWIDTH_WIDE			(0x0 << 26)
> diff --git a/arch/arm/plat-samsung/include/plat/regs-fb.h b/arch/arm/plat-
> samsung/include/plat/regs-fb.h
> index 9a78012..6d2ee16 100644
> --- a/arch/arm/plat-samsung/include/plat/regs-fb.h
> +++ b/arch/arm/plat-samsung/include/plat/regs-fb.h
> @@ -32,12 +32,28 @@
> 
>  #define VIDCON0					(0x00)
>  #define VIDCON0_INTERLACE			(1 << 29)
> +
> +#ifdef CONFIG_FB_EXYNOS_FIMD_V8
> +#define VIDOUT_CON				(0x20000)
> +#define VIDOUT_CON_VIDOUT_UP_MASK		(0x1 << 16)
> +#define VIDOUT_CON_VIDOUT_UP_SHIFT		(16)
> +#define VIDOUT_CON_VIDOUT_UP_ALWAYS		(0x0 << 16)
> +#define VIDOUT_CON_VIDOUT_UP_START_FRAME	(0x1 << 16)
> +#define VIDOUT_CON_VIDOUT_F_MASK		(0x7 << 8)
> +#define VIDOUT_CON_VIDOUT_F_SHIFT		(8)
> +#define VIDOUT_CON_VIDOUT_F_RGB			(0x0 << 8)
> +#define VIDOUT_CON_VIDOUT_F_I80_LDI0		(0x2 << 8)
> +#define VIDOUT_CON_VIDOUT_F_I80_LDI1		(0x3 << 8)
> +#define VIDOUT_CON_VIDOUT_F_WB			(0x4 << 8)
> +#endif
> +
>  #define VIDCON0_VIDOUT_MASK			(0x3 << 26)
>  #define VIDCON0_VIDOUT_SHIFT			(26)
>  #define VIDCON0_VIDOUT_RGB			(0x0 << 26)
>  #define VIDCON0_VIDOUT_TV			(0x1 << 26)
>  #define VIDCON0_VIDOUT_I80_LDI0			(0x2 << 26)
>  #define VIDCON0_VIDOUT_I80_LDI1			(0x3 << 26)
> +#define VIDCON0_VIDOUT_WB                       (0x4 << 26)
> 
>  #define VIDCON0_L1_DATA_MASK			(0x7 << 23)
>  #define VIDCON0_L1_DATA_SHIFT			(23)
> @@ -81,7 +97,13 @@
>  #define VIDCON0_ENVID				(1 << 1)
>  #define VIDCON0_ENVID_F				(1 << 0)
> 
> +#ifdef CONFIG_FB_EXYNOS_FIMD_V8
> +#define VIDOUT_CON                              (0x20000)
> +#define VIDCON1                                 (0x20004)
> +#else
>  #define VIDCON1					(0x04)
> +#endif
> +
>  #define VIDCON1_LINECNT_MASK			(0x7ff << 16)
>  #define VIDCON1_LINECNT_SHIFT			(16)
>  #define VIDCON1_LINECNT_GET(_v)			(((_v) >> 16) & 0x7ff)
> @@ -111,6 +133,14 @@
>  #define VIDCON2_TVFMTSEL1_RGB			(0x0 << 12)
>  #define VIDCON2_TVFMTSEL1_YUV422		(0x1 << 12)
>  #define VIDCON2_TVFMTSEL1_YUV444		(0x2 << 12)
> +#define VIDCON2_TVFMTSEL1_SHIFT			(12)
> +#define VIDCON2_TVFMTSEL_SW			(1 << 14)
> +#define VIDCON2_TVFORMATSEL_YUV444		(0x2 << 12)
> +
> +#define VIDCON2_TVFMTSEL1_MASK			(0x3 << 12)
> +#define VIDCON2_TVFMTSEL1_RGB			(0x0 << 12)
> +#define VIDCON2_TVFMTSEL1_YUV422		(0x1 << 12)
> +#define VIDCON2_TVFMTSEL1_YUV444		(0x2 << 12)
> 
>  #define VIDCON2_ORGYCbCr			(1 << 8)
>  #define VIDCON2_YUVORDCrCb			(1 << 7)
> @@ -165,8 +195,15 @@
>  #define VIDTCON1_HSPW_SHIFT			(0)
>  #define VIDTCON1_HSPW_LIMIT			(0xff)
>  #define VIDTCON1_HSPW(_x)			((_x) << 0)
> +#define VIDCON1_VCLK_MASK                       (0x3 << 9)
> +#define VIDCON1_VCLK_HOLD                       (0x0 << 9)
> +#define VIDCON1_VCLK_RUN                        (0x1 << 9)
> 
> +#ifdef CONFIG_FB_EXYNOS_FIMD_V8
> +#define VIDTCON2				(0x20018)
> +#else
>  #define VIDTCON2				(0x18)
> +#endif
>  #define VIDTCON2_LINEVAL_E(_x)			((((_x) & 0x800) >> 11) << 23)
>  #define VIDTCON2_LINEVAL_MASK			(0x7ff << 11)
>  #define VIDTCON2_LINEVAL_SHIFT			(11)
> @@ -186,6 +223,9 @@
>  #define WINCONx_BYTSWP				(1 << 17)
>  #define WINCONx_HAWSWP				(1 << 16)
>  #define WINCONx_WSWP				(1 << 15)
> +#define WINCONx_ENLOCAL_MASK			(0xf << 15)
> +#define WINCONx_INRGB_RGB			(0 << 13)
> +#define WINCONx_INRGB_YCBCR			(1 << 13)
>  #define WINCONx_BURSTLEN_MASK			(0x3 << 9)
>  #define WINCONx_BURSTLEN_SHIFT			(9)
>  #define WINCONx_BURSTLEN_16WORD			(0x0 << 9)
> @@ -205,6 +245,7 @@
>  #define WINCON0_BPPMODE_24BPP_888		(0xb << 2)
> 
>  #define WINCON1_BLD_PIX				(1 << 6)
> +#define WINCON1_BLD_PLANE			(0 << 6)
> 
>  #define WINCON1_ALPHA_SEL			(1 << 1)
>  #define WINCON1_BPPMODE_MASK			(0xf << 2)
> @@ -395,9 +436,19 @@
>  #define WPALCON_W0PAL_16BPP_A555		(0x5 << 0)
>  #define WPALCON_W0PAL_16BPP_565			(0x6 << 0)
> 
> +/* Clock gate mode control */
> +#define REG_CLKGATE_MODE			(0x1b0)
> +#define REG_CLKGATE_MODE_AUTO_CLOCK_GATE	(0 << 0)
> +#define REG_CLKGATE_MODE_NON_CLOCK_GATE		(1 << 0)
> +
>  /* Blending equation control */
>  #define BLENDCON				(0x260)
>  #define BLENDCON_NEW_MASK			(1 << 0)
>  #define BLENDCON_NEW_8BIT_ALPHA_VALUE		(1 << 0)
>  #define BLENDCON_NEW_4BIT_ALPHA_VALUE		(0 << 0)
> 
> +/* Window alpha control */
> +#define VIDW0ALPHA0				(0x200)
> +#define VIDW0ALPHA1				(0x204)
> +#define DPCLKCON				(0x27c)
> +#define DPCLKCON_ENABLE				(1 << 1)
> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> index 0217f74..f81bf55 100644
> --- a/drivers/video/Kconfig
> +++ b/drivers/video/Kconfig
> @@ -2053,6 +2053,12 @@ config FB_S3C
> 
>  	  Currently the support is only for the S3C6400 and S3C6410 SoCs.
> 
> +config FB_EXYNOS_FIMD_V8
> +	bool "register extensions for FIMD version 8"
> +	depends on ARCH_EXYNOS5
> +	---help---
> +	This uses register extensions for FIMD version 8
> +
>  config FB_S3C_DEBUG_REGWRITE
>         bool "Debug register writes"
>         depends on FB_S3C

Do we really need these defines in arch/arm/plat-samsung/include/plat/regs-fb* ? 
IMHO they should be moved from arch/arm to drivers/video to live together with the driver.
They are not a part of core platform code. I thought that there have been some patches 
cleaning up regs-fb mess a long time ago, but it looks they didn't get their way to 
mainline.

Best regards
-- 
Marek Szyprowski
Samsung Poland R&D Center





More information about the linux-arm-kernel mailing list