[PATCH v2 0/2] omap: add ocp2scp as a bus driver
Kishon Vijay Abraham I
kishon at ti.com
Wed Jul 18 02:30:37 EDT 2012
This patch series is done as a preparatory step for adding phy drivers
for dwc3 and musb.
This series adds a new driver for ocp2scp (only dt) to which phy
drivers are connected.
Since currently there is no generic way to create a child device along
with doing a pm_runtime_enable (the exact requirement for ocp2scp), I'm
creating a separate driver for ocp2scp.
Changes from v1:
Fixed Sergei's comments to remove the address in the node name of ocp2scp
since the ocp2scp node doesn't have a reg property.
Changes from [RFC PATCH v2 0/2] omap: add ocp2scp as a misc driver:
Created a new folder drivers/bus and moved ocp2scp driver from misc to
drivers/bus.
This patch was developed and tested on
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
Kishon Vijay Abraham I (2):
drivers: bus: add a new driver for omap-ocp2scp
arm/dts: omap4: Add ocp2scp data
.../devicetree/bindings/bus/omap-ocp2scp.txt | 10 ++
arch/arm/boot/dts/omap4.dtsi | 8 ++
drivers/Kconfig | 2 +
drivers/Makefile | 2 +
drivers/bus/Kconfig | 15 +++
drivers/bus/Makefile | 5 +
drivers/bus/omap-ocp2scp.c | 98 ++++++++++++++++++++
7 files changed, 140 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
create mode 100644 drivers/bus/Kconfig
create mode 100644 drivers/bus/Makefile
create mode 100644 drivers/bus/omap-ocp2scp.c
--
1.7.5.4
More information about the linux-arm-kernel
mailing list