[RFC 5/6] ARM: OMAP3: hwmod data: add sad2d hwmod
Tero Kristo
t-kristo at ti.com
Fri Jul 13 12:37:38 EDT 2012
SAD2D stands for the die to die interface, and is used for communicating
with the optional stacked modem. This hwmod is added in preparation for
the d2d_idle move from pm34xx.c to hwmod data.
Signed-off-by: Tero Kristo <t-kristo at ti.com>
---
arch/arm/mach-omap2/cm-regbits-34xx.h | 2 +
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 37 ++++++++++++++++++++++++++++
2 files changed, 39 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 90d150c8..03b0806 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -218,6 +218,8 @@
#define OMAP3430_ST_MAILBOXES_MASK (1 << 7)
#define OMAP3430_ST_OMAPCTRL_SHIFT 6
#define OMAP3430_ST_OMAPCTRL_MASK (1 << 6)
+#define OMAP3430_ST_SAD2D_SHIFT 3
+#define OMAP3430_ST_SAD2D_MASK (1 << 3)
#define OMAP3430_ST_SDMA_SHIFT 2
#define OMAP3430_ST_SDMA_MASK (1 << 2)
#define OMAP3430_ST_SDRC_SHIFT 1
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 1ef6c90..dd1335e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -2017,6 +2017,33 @@ static struct omap_hwmod omap3xxx_hdq1w_hwmod = {
.class = &omap2_hdq1w_class,
};
+/* SAD2D */
+static struct omap_hwmod_rst_info omap3xxx_sad2d_resets[] = {
+ { .name = "rst_modem_pwron_sw", .rst_shift = 0 },
+ { .name = "rst_modem_sw", .rst_shift = 1 },
+};
+
+static struct omap_hwmod_class omap3xxx_sad2d_class = {
+ .name = "sad2d",
+};
+
+static struct omap_hwmod omap3xxx_sad2d_hwmod = {
+ .name = "sad2d",
+ .rst_lines = omap3xxx_sad2d_resets,
+ .rst_lines_cnt = ARRAY_SIZE(omap3xxx_sad2d_resets),
+ .main_clk = "sad2d_ick",
+ .prcm = {
+ .omap2 = {
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_SAD2D_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_SAD2D_SHIFT,
+ },
+ },
+ .class = &omap3xxx_sad2d_class,
+};
+
/*
* '32K sync counter' class
* 32-bit ordinary counter, clocked by the falling edge of the 32 khz clock
@@ -2120,6 +2147,15 @@ static struct omap_hwmod_ocp_if am35xx_usbhsotg__l3 = {
.clk = "core_l3_ick",
.user = OCP_USER_MPU,
};
+
+/* l3_core -> sad2d interface */
+static struct omap_hwmod_ocp_if omap3xxx_sad2d__l3 = {
+ .master = &omap3xxx_sad2d_hwmod,
+ .slave = &omap3xxx_l3_main_hwmod,
+ .clk = "core_l3_ick",
+ .user = OCP_USER_MPU,
+};
+
/* L4_CORE -> L4_WKUP interface */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = {
.master = &omap3xxx_l4_core_hwmod,
@@ -3203,6 +3239,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
&omap34xx_l4_core__mcspi3,
&omap34xx_l4_core__mcspi4,
&omap3xxx_l4_wkup__counter_32k,
+ &omap3xxx_sad2d__l3,
NULL,
};
--
1.7.4.1
More information about the linux-arm-kernel
mailing list