[PATCH v2 00/11] omap: musb: Add device tree support
Kishon Vijay Abraham I
kishon at ti.com
Tue Jul 17 04:10:00 EDT 2012
This patch series adds device tree support for MUSB and device
tree support for all the related modules to get MUSB working in
OMAP platform.
A new omap-usb2 phy driver has been added (with only dt suppport)
to perform phy configurations. Previously this configuration was
performed by twl6030, using pdata function pointers.
With the addition of omap-usb2 to perform phy configurations,
twl6030 is made as a comparator driver to detect VBUS and ID events
and notify it to the glue layer.
musb core is _NOT_ yet converted to support device tree support as it
would need lot of driver re-design because of its enormous use of
function pointers. That will be in _TO DO_ list.
Changes from v1:
* Fixed Rajendra Nayak comments (regulator naming, compatible naming of
musb and other minor cleanups.)
* It's agreed to have ocp2scp in drivers/bus and usb2 phy is a child of
ocp2scp, the documentation is updated accordingly.
Changes from RFC:
Removed the dependency on [RFC PATCH 00/11] OMAP System Control Module.
Writing to control module register is now handled in otg driver itself.
Once the system control module driver get upstreamed, I'll send a patch
to make use of API's in control module driver to write to control
module register.
This series was developed on
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git xceiv
This patch series depends on
[PATCH 0/2] omap: add ocp2scp as a bus driver
Performed MUSB device mode testing on OMAP4 panda, OMAP4 SDP
and OMAP3 beagle.
Kishon Vijay Abraham I (11):
drivers: usb: otg: add a new driver for omap usb2 phy
arm/dts: omap: Add omap-usb2 dt data
drivers: usb: otg: make twl6030_usb as a comparator driver to
omap_usb2
arm: omap: hwmod: add a new addr space in otg fo writing to control
module
drivers: usb: twl6030: Add dt support for twl6030 usb
arm/dts: Add twl6030-usb data
drivers: usb: twl4030: Add device tree support for twl4030 usb
arm/dts: Add twl4030-usb data
drivers: usb: musb: Add device tree support for omap musb glue
arm/dts: omap: Add usb_otg and glue data
arm: omap: phy: remove unused functions from omap-phy-internal.c
.../devicetree/bindings/bus/omap-ocp2scp.txt | 3 +
Documentation/devicetree/bindings/usb/omap-usb.txt | 48 ++++
.../devicetree/bindings/usb/twlxxxx-usb.txt | 41 +++
arch/arm/boot/dts/omap3-beagle.dts | 6 +
arch/arm/boot/dts/omap3-evm.dts | 6 +
arch/arm/boot/dts/omap3.dtsi | 8 +
arch/arm/boot/dts/omap4-panda.dts | 10 +
arch/arm/boot/dts/omap4-sdp.dts | 10 +
arch/arm/boot/dts/omap4.dtsi | 13 +
arch/arm/boot/dts/twl4030.dtsi | 21 ++
arch/arm/boot/dts/twl6030.dtsi | 6 +
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 5 +
arch/arm/mach-omap2/omap_phy_internal.c | 138 ----------
arch/arm/mach-omap2/twl-common.c | 5 -
arch/arm/mach-omap2/usb-musb.c | 3 -
drivers/usb/musb/omap2430.c | 107 +++++++-
drivers/usb/musb/omap2430.h | 9 +
drivers/usb/otg/Kconfig | 10 +
drivers/usb/otg/Makefile | 1 +
drivers/usb/otg/omap-usb2.c | 271 ++++++++++++++++++++
drivers/usb/otg/twl4030-usb.c | 26 ++-
drivers/usb/otg/twl6030-usb.c | 153 +++--------
include/linux/usb/omap_usb.h | 45 ++++
include/linux/usb/phy_companion.h | 34 +++
24 files changed, 706 insertions(+), 273 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/omap-usb.txt
create mode 100644 Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
create mode 100644 drivers/usb/otg/omap-usb2.c
create mode 100644 include/linux/usb/omap_usb.h
create mode 100644 include/linux/usb/phy_companion.h
--
1.7.5.4
More information about the linux-arm-kernel
mailing list