[PATCH 6/8] ARM: VIC: Add a couple of low-level FIQ management helpers

[Anton Vorontsov]

Just a couple of calls to manage VIC FIQ routing. We'll use them for
KGDB FIQ support on ARM Versatile machines.

Signed-off-by: Anton Vorontsov <anton.vorontsov at linaro.org>
---
 arch/arm/common/vic.c               |   28 ++++++++++++++++++++++++++++
 arch/arm/include/asm/hardware/vic.h |    2 ++
 2 files changed, 30 insertions(+)

diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index e0d5388..df2fc82 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -66,6 +66,34 @@ static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
 
 static int vic_id;
 
+static void __iomem *vic_base(struct irq_data *d)
+{
+	return (void __iomem *)irq_data_get_irq_chip_data(d);
+}
+
+void vic_fiq_select(unsigned int irq, bool on)
+{
+	void __iomem *base = vic_base(&irq_to_desc(irq)->irq_data);
+	void __iomem *sel = base + VIC_INT_SELECT;
+	u32 msk = 1 << irq;
+	u32 val;
+
+	pr_debug("rerouting VIC vector %d to %s\n", irq, on ? "FIQ" : "IRQ");
+
+	val = readl(sel);
+	val &= ~msk;
+	if (on)
+		val |= msk;
+	writel(val, sel);
+}
+
+bool vic_is_fiq_rised(unsigned int irq)
+{
+	void __iomem *base = vic_base(&irq_to_desc(irq)->irq_data);
+
+	return readl(base + VIC_FIQ_STATUS) & (1 << irq);
+}
+
 /**
  * vic_init2 - common initialisation code
  * @base: Base of the VIC.
diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h
index e14af1a..2728975 100644
--- a/arch/arm/include/asm/hardware/vic.h
+++ b/arch/arm/include/asm/hardware/vic.h
@@ -52,6 +52,8 @@ void __vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources,
 void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
 int vic_of_init(struct device_node *node, struct device_node *parent);
 void vic_handle_irq(struct pt_regs *regs);
+void vic_fiq_select(unsigned int irq, bool on);
+bool vic_is_fiq_rised(unsigned int irq);
 
 #endif /* __ASSEMBLY__ */
 #endif
-- 
1.7.10.4