[PATCH v7 0/6] imx28/imx6q: add usb support
Richard Zhao
richard.zhao at freescale.com
Wed Jul 11 22:25:21 EDT 2012
This is platform part to add imx28/imx6q driver support.
The dirver part has been mostly merged to usb-next.
Changes since last version:
- correct subject
- use of_find_compatible_node
- remove hub reset
- add mx28 evk gpio pinctrl
Richard Zhao (6):
ARM: imx6q: add usb controller clock lookups
ARM: imx6q: add usbphy clocks
ARM: imx6q: disable usb charger detector
ARM: dts: imx6q-sabrelite: add usb devices
clk: mxs: clk_register_clkdev mx28 usb clocks
ARM: dts: imx28-evk: add usb devices
arch/arm/boot/dts/imx28-evk.dts | 38 ++++++++++++++++++++++++++++++
arch/arm/boot/dts/imx28.dtsi | 12 ++++++++--
arch/arm/boot/dts/imx6q-sabrelite.dts | 19 ++++++++++++++-
arch/arm/boot/dts/imx6q.dtsi | 36 +++++++++++++++++++++++++++--
arch/arm/mach-imx/clk-imx6q.c | 11 ++++++++-
arch/arm/mach-imx/mach-imx6q.c | 41 +++++++++++++++++++++++++++++++++
drivers/clk/mxs/clk-imx28.c | 4 ++++
7 files changed, 155 insertions(+), 6 deletions(-)
--
1.7.9.5
More information about the linux-arm-kernel
mailing list