Move designware timer OF glue into drivers/clocksource
Pavel Machek
pavel at denx.de
Tue Jul 10 08:19:44 EDT 2012
Hi!
On Tue 2012-07-10 12:24:48, Jamie Iles wrote:
> On Tue, Jul 10, 2012 at 11:42:50AM +0200, Pavel Machek wrote:
> > Hi!
> >
> > It seems mach-socfpga (not yet in tree, we are trying to merge it)
> > would need pretty much direct copy of arch/arm/mach-picoxcell/time.c
> > ... And because "just copying" it seems like quite bad idea, what
> > about this, instead?
>
> Sure, sounds like a great plan! I'd agree with Thomas about creating a
> config option for this. We'll also need the appropriate binding
> documentation (probably just moving and rewording the picoxcell timer
> binding docs).
Ok, I hope I got the place right.
> If you could add the picoxcell compatible strings then we can avoid the
> dts churn.
Ok. Could you test if this patch works for you? Thomas, could you
apply it if it does?
---
Move dw-apb devicetree bindings code to drivers/clocksource, so it can
be easily shared between picoxcell and socfpga.
Signed-off-by: Pavel Machek <pavel at denx.de>
diff --git a/Documentation/devicetree/bindings/rtc/dw-apb.txt b/Documentation/devicetree/bindings/rtc/dw-apb.txt
new file mode 100644
index 0000000..c80c3cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/dw-apb.txt
@@ -0,0 +1,24 @@
+* Designware APB timer
+
+Required properties:
+- compatible: "snps,dw-apb-timer-sp" or "snps,dw-apb-timer-osc"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: IRQ line for the timer.
+- clock-freq: The frequency in HZ of the timer.
+
+Example:
+
+ timer1: timer at ffc09000 {
+ compatible = "snps,dw-apb-timer-sp";
+ interrupts = <0 168 4>;
+ clock-freq = <200000000>;
+ reg = <0xffc09000 0x1000>;
+ };
+
+ timer2: timer at ffd00000 {
+ compatible = "snps,dw-apb-timer-osc";
+ interrupts = <0 169 4>;
+ clock-freq = <200000000>;
+ reg = <0xffd00000 0x1000>;
+ };
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 996dd8b..2b5e3d5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -675,6 +676,7 @@ config ARCH_PICOXCELL
select ARM_VIC
select CPU_V6K
select DW_APB_TIMER
+ select DW_APB_TIMER_OF
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select HAVE_TCM
diff --git a/arch/arm/mach-picoxcell/Makefile b/arch/arm/mach-picoxcell/Makefile
index e5ec4a8..2b8fbad 100644
--- a/arch/arm/mach-picoxcell/Makefile
+++ b/arch/arm/mach-picoxcell/Makefile
@@ -1,2 +1,2 @@
obj-y := common.o
-obj-y += time.o
+
diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c
index a2e8ae8..9139884 100644
--- a/arch/arm/mach-picoxcell/common.c
+++ b/arch/arm/mach-picoxcell/common.c
@@ -97,7 +97,7 @@ DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
.nr_irqs = NR_IRQS_LEGACY,
.init_irq = picoxcell_init_irq,
.handle_irq = vic_handle_irq,
- .timer = &picoxcell_timer,
+ .timer = &dw_apb_timer,
.init_machine = picoxcell_init_machine,
.dt_compat = picoxcell_dt_match,
.restart = picoxcell_wdt_restart,
diff --git a/arch/arm/mach-picoxcell/time.c b/arch/arm/mach-picoxcell/time.c
deleted file mode 100644
index 2ecba67..0000000
--- a/arch/arm/mach-picoxcell/time.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * All enquiries to support at picochip.com
- */
-#include <linux/dw_apb_timer.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-
-#include <asm/mach/time.h>
-#include <asm/sched_clock.h>
-
-#include "common.h"
-
-static void timer_get_base_and_rate(struct device_node *np,
- void __iomem **base, u32 *rate)
-{
- *base = of_iomap(np, 0);
-
- if (!*base)
- panic("Unable to map regs for %s", np->name);
-
- if (of_property_read_u32(np, "clock-freq", rate))
- panic("No clock-freq property for %s", np->name);
-}
-
-static void picoxcell_add_clockevent(struct device_node *event_timer)
-{
- void __iomem *iobase;
- struct dw_apb_clock_event_device *ced;
- u32 irq, rate;
-
- irq = irq_of_parse_and_map(event_timer, 0);
- if (irq == NO_IRQ)
- panic("No IRQ for clock event timer");
-
- timer_get_base_and_rate(event_timer, &iobase, &rate);
-
- ced = dw_apb_clockevent_init(0, event_timer->name, 300, iobase, irq,
- rate);
- if (!ced)
- panic("Unable to initialise clockevent device");
-
- dw_apb_clockevent_register(ced);
-}
-
-static void picoxcell_add_clocksource(struct device_node *source_timer)
-{
- void __iomem *iobase;
- struct dw_apb_clocksource *cs;
- u32 rate;
-
- timer_get_base_and_rate(source_timer, &iobase, &rate);
-
- cs = dw_apb_clocksource_init(300, source_timer->name, iobase, rate);
- if (!cs)
- panic("Unable to initialise clocksource device");
-
- dw_apb_clocksource_start(cs);
- dw_apb_clocksource_register(cs);
-}
-
-static void __iomem *sched_io_base;
-
-static u32 picoxcell_read_sched_clock(void)
-{
- return __raw_readl(sched_io_base);
-}
-
-static const struct of_device_id picoxcell_rtc_ids[] __initconst = {
- { .compatible = "picochip,pc3x2-rtc" },
- { /* Sentinel */ },
-};
-
-static void picoxcell_init_sched_clock(void)
-{
- struct device_node *sched_timer;
- u32 rate;
-
- sched_timer = of_find_matching_node(NULL, picoxcell_rtc_ids);
- if (!sched_timer)
- panic("No RTC for sched clock to use");
-
- timer_get_base_and_rate(sched_timer, &sched_io_base, &rate);
- of_node_put(sched_timer);
-
- setup_sched_clock(picoxcell_read_sched_clock, 32, rate);
-}
-
-static const struct of_device_id picoxcell_timer_ids[] __initconst = {
- { .compatible = "picochip,pc3x2-timer" },
- {},
-};
-
-static void __init picoxcell_timer_init(void)
-{
- struct device_node *event_timer, *source_timer;
-
- event_timer = of_find_matching_node(NULL, picoxcell_timer_ids);
- if (!event_timer)
- panic("No timer for clockevent");
- picoxcell_add_clockevent(event_timer);
-
- source_timer = of_find_matching_node(event_timer, picoxcell_timer_ids);
- if (!source_timer)
- panic("No timer for clocksource");
- picoxcell_add_clocksource(source_timer);
-
- of_node_put(source_timer);
-
- picoxcell_init_sched_clock();
-}
-
-struct sys_timer picoxcell_timer = {
- .init = picoxcell_timer_init,
-};
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 99c6b20..e62bc7e 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -16,6 +16,9 @@ config CLKSRC_MMIO
config DW_APB_TIMER
bool
+config DW_APB_TIMER_OF
+ bool
+
config CLKSRC_DBX500_PRCMU
bool "Clocksource PRCMU Timer"
depends on UX500_SOC_DB8500
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index dd3e661..2cdaf7d 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -10,4 +10,5 @@ obj-$(CONFIG_EM_TIMER_STI) += em_sti.o
obj-$(CONFIG_CLKBLD_I8253) += i8253.o
obj-$(CONFIG_CLKSRC_MMIO) += mmio.o
obj-$(CONFIG_DW_APB_TIMER) += dw_apb_timer.o
+obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_timer_of.o
obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o
\ No newline at end of file
diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c
new file mode 100644
index 0000000..e89b0ae
--- /dev/null
+++ b/drivers/clocksource/dw_apb_timer_of.c
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2012 Altera Corporation
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * Modified from mach-picoxcell/time.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/dw_apb_timer.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <asm/mach/time.h>
+#include <asm/sched_clock.h>
+
+static void timer_get_base_and_rate(struct device_node *np,
+ void __iomem **base, u32 *rate)
+{
+ *base = of_iomap(np, 0);
+
+ if (!*base)
+ panic("Unable to map regs for %s", np->name);
+
+ if (of_property_read_u32(np, "clock-freq", rate))
+ panic("No clock-freq property for %s", np->name);
+}
+
+static void add_clockevent(struct device_node *event_timer)
+{
+ void __iomem *iobase;
+ struct dw_apb_clock_event_device *ced;
+ u32 irq, rate;
+
+ irq = irq_of_parse_and_map(event_timer, 0);
+ if (irq == NO_IRQ)
+ panic("No IRQ for clock event timer");
+
+ timer_get_base_and_rate(event_timer, &iobase, &rate);
+
+ ced = dw_apb_clockevent_init(0, event_timer->name, 300, iobase, irq,
+ rate);
+ if (!ced)
+ panic("Unable to initialise clockevent device");
+
+ dw_apb_clockevent_register(ced);
+}
+
+static void add_clocksource(struct device_node *source_timer)
+{
+ void __iomem *iobase;
+ struct dw_apb_clocksource *cs;
+ u32 rate;
+
+ timer_get_base_and_rate(source_timer, &iobase, &rate);
+
+ cs = dw_apb_clocksource_init(300, source_timer->name, iobase, rate);
+ if (!cs)
+ panic("Unable to initialise clocksource device");
+
+ dw_apb_clocksource_start(cs);
+ dw_apb_clocksource_register(cs);
+}
+
+static void __iomem *sched_io_base;
+
+static u32 read_sched_clock(void)
+{
+ return __raw_readl(sched_io_base);
+}
+
+static const struct of_device_id sptimer_ids[] __initconst = {
+ { .compatible = "snps,dw-apb-timer-sp" },
+ { .compatible = "picochip,pc3x2-rtc" },
+ { /* Sentinel */ },
+};
+
+static void init_sched_clock(void)
+{
+ struct device_node *sched_timer;
+ u32 rate;
+
+ sched_timer = of_find_matching_node(NULL, sptimer_ids);
+ if (!sched_timer)
+ panic("No RTC for sched clock to use");
+
+ timer_get_base_and_rate(sched_timer, &sched_io_base, &rate);
+ of_node_put(sched_timer);
+
+ setup_sched_clock(read_sched_clock, 32, rate);
+}
+
+static const struct of_device_id osctimer_ids[] __initconst = {
+ { .compatible = "snps,dw-apb-timer-osc" },
+ { .compatible = "picochip,pc3x2-timer" },
+ {},
+};
+
+static void __init timer_init(void)
+{
+ struct device_node *event_timer, *source_timer;
+
+ event_timer = of_find_matching_node(NULL, osctimer_ids);
+ if (!event_timer)
+ panic("No timer for clockevent");
+ add_clockevent(event_timer);
+
+ source_timer = of_find_matching_node(event_timer, osctimer_ids);
+ if (!source_timer)
+ panic("No timer for clocksource");
+ add_clocksource(source_timer);
+
+ of_node_put(source_timer);
+
+ init_sched_clock();
+}
+
+struct sys_timer dw_apb_timer = {
+ .init = timer_init,
+};
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
More information about the linux-arm-kernel
mailing list